Design Manufacture And Supply Of High Tensile Aar H Type Tight Lock Cent Re Buffer Coupler Head With Transition Screw Coupling And Its Associated Compon Ents For Fitment On Broad Gauge Passenger Coaches Of Indian Railways As Per Rds O.Specn.No. Rdso/2009/Cg-22, Rev -01 One Coupler Set Shall Consists Of The Following 1.Tight Lock Coupler Head With Transition Screw Coupling And Its Associated Compo Nents 1 No Rdso Approved Firm Drgs. 2.Balanced Draft Gear With Pivot Pin 1 No Rdso Approved Firm Drgs. 3.Supporting Device For Coupler Head With M20 Fasteners 1 No Rdso Approved Firm Drgs. 4.Manual Uncoupling Device With M12 Fasteners 1 No Rdso Approved Firm Drgs. 5.Rear Carrier Plate For Draft Gear With M16 Fasteners 1 No Rd So Approved Firm Drgs. 6.Front Carrier Plate For Draft Gear With M16 Fasteners 1 N O Rdso Approved Firm Drgs. Special Condition : 1. Maintenance Manual In Soft Copy And H Ard Copy Shall Be Supplied With Item. 2.Necessary Test Certificates As Per Rdso .Spe Cn .No. Rdso/2009/Cg-22 Rev -01 Shall Be Supplied With Item. 3. Rev.03 Or Latest Revision Of Specification Rdso/2011/Cg-03 Referred In Rdso/2009/Cg-22 Rev -01 Shall Be Followe D. 4. Tenderer To Submit Rdso Approved Drawings At The Time Of Quoting The Tender. Safety Item Warranty Period: 84 Months After The Date Of Delivery
Design, Manufacture And Supply Of Improved High Tensile Tight Lock Cent Re Buffer Coupler With Aar H Type Head, Balanced Draft Gear And Its Associated C Omponents For Fitment On Broad Gauge Passenger Coaches Of Indian Railways As Pe R Rdso Spec.No.Rdso/2011/Cg-03, Rev-03. Coupler Mounting Arrangement On Under Fra Me Shall Be Generally To Icf Drg.No.Lwgfac-2-1-001 Alt E. One Coupler Set Shall Con Sists Of The Following 1.Tight Lock Coupler Head And Associated Components Refe Rence Rdso Approved Firm Drawings-Qty -1 No. 2.Balanced Draft Gear With Pivot Pin Reference Rdso Approved Firm Drawings-Qty 1 No. 3.Supporting Device For Coupler Head With M20 Fasteners Reference Rdso Approved Firm Drawings -Qty 1 No. 4.Manu Al Un Coupling Device With M12 Fasteners Reference Rdso Approved Firm Drawings - Qty -1 No. 5.Rear Carrier Plate For Draft Gear With M16 Fasteners Reference Rdso Approved Firm Drawings -Qty -1 No. 6.Front Carrier Plate For Draft Gear With M16 Fa Steners Rdso Approved Firm Drawings-Qty -1 No. Special Condition : 1. Maintenance Manu Al In Soft Copy And Hard Copy Shall Be Supplied With Item 2.Necessary Test Certifica Tes As Per Rdso .Specn .No. Rdso/2011/Cg-03, Rev-03 Shall Be Supplied With Item 3. Tende Rer To Submit Rdso Approved Drawings At The Time Of Quoting The Tender. 4. Packing Condition: Items Are To Be Packed In Two Different Boxes As Given Below. I. List Of Ite Ms To Be In Box-1 1. Balanced Draft Gear With Wedge Block Assembly & Wedge Block. 2 . Rear Carrier Plate 3. Fornt Carrier Plate 4. Fasteners For Front And Rear Carrier Plates. Ii. List Of Items To Be In Box-2 1. Coupler Head And Associated Components. 2. M Ain Pivot Pin. 3. Supporting Device For Coupler Head. 4. Fasteners For Supporting De Vice. 5. Manual Coupling Device 6. Fasteners For Manual Uncoupling Device. 7. Split Pi Ns For Carrier Plate. 8. Balance Items, If Any.. Instructions For Packing Of Fasteners . 1. Box-1: Item-4 2. Box-2, Item-4, 6 & 7/ Each To Be Packed And Sealed Separately In Trans Parent Polythene Cover Of Minimum 200 Microns With Appropriate Description Label S Kept Inside For Easy Identification. Safety Item Warranty Period: 84 Months After The Date Of Delivery
Supply of Inter-Vehicle Power Couplers With E-Beam Cables Overall Length 3000 Mm, Mounting Plates, D Ummy Recp, Coupling Socket- 01 No. & Jumper Plug-01 No. Each Complete Assembly Ready To Use For Part No. 488-750Vivc For Maharaja Express As Per Drawing Attached. Warranty Period: 30 Months After The Date Of Del Ivery
Supply Of Optics And Optomechanics Digital Power & Energy Console, Si Sensor, 400 Nm -1100 Nm, 500 Nw - 500 Mw, Thermal Power Sensor Head, Surface Absorber, 0.19 - 20 M, 2 Mw - 10 W, Diameter 15 Mm, Diameter 2Inch Mounted Polymer Zero-Order Quarter-Wave Plate, Sm2-Threaded Mount, 780 Nm, Fc Apc Fiber Adapter Cap With Internal Sm1 1.035Inch -40 Threads, Narrow Key 2.0 Mm, Fc Apc Fiber Adapter Plate With External Sm1 1.035Inch -40 Threads, Wide Key 2.2 Mm, Laser Safety Glasses, Amber Lenses, 25% Visible Light Transmission, Universal Style, Laser Safety Glasses, Clear Lenses, 75% Visible Light Transmission, Laser Safety Glasses, Light Orange Lenses, 48% Visible Light Transmission, Universal Style, Diameter 1Inch Uvfs Beam Sampler For Beam Pick-Off, Arc 650-1050 Nm, 5 Mm Thick, Diameter 1 2Inch Uvfs Beam Sampler For Beam Pick-Off, Arc 650-1050 Nm, 3 Mm Thick, Mounted Uv Enhanced Silicon Photodiode, 200-1100 Nm, Cathode Grounded, 1X2 Pm Coupler, 780 Plus Minus 15 Nm, 50 50 Split, More Than Or Equal To 18 Db Per, Fc Apc Connectors, Scanning Fabry-Perot Interferometer, 535-820 Nm, 10 Ghz Fsr, Control Box For Scanning Fabry-Perot Interferometers, Fc Pc To Fc Pc Or Fc Apc To Fc Apc Mating Sleeve, Wide Precision Key 2.2 Mm, Square Flange, Hard-Coated Bandpass Filter, Diameter 25 Mm, Cwl 780 Nm, Fwhm 3 Nm, Kinematic, Sm1-Threaded, 30 Mm-Cage-Compatible Mount For Diameter 1Inch Optic, Metric, Precision Cage Rotation Mount With Micrometer Drive, Diameter 1Inch Optics, M4 Tap, Cage Rotation Mount For Diameter 1Inch Optics, Sm1 Threaded, M4 Tap, Diameter 1Inch Adjustable Lens Tube, 0.31Inch Travel Range, Rotation Mount For Diameter 1Inch 25.4 Mm Optics, External Sm1 Threads, 60 Mm Cage System Rotation Mount With Sm2-Threaded Bore, M4 X 0.7 Tap, Sm1 Zoom Housing For Diameter 1Inch Optics, Non-Rotating, 2Inch 50.8 Mm Travel, Diameter 1Inch Adjustable Lens Tube, 0.81Inch Travel Range, Adapter With External Sm1 Threads And External Sm2 Threads, Sm1-Threaded 30 Mm Cage Plate, 0.35Inch Thick, 2 Retaining Rings, M4 Tap, F 50.0 Mm, Diameter 1Inch Achromatic Doublet, Arc 650 - 1050 Nm, Sm2 Lens Tube, 0.5Inch Thread Depth, One Retaining Ring Included, Cage Assembly Rod, 1 2Inch Long, Diameter 6 Mm, 4 Pack, 30 Mm To 60 Mm Cage Plate Adapter, 6 Mm Thick, Right-Angle Kinematic Mirror Mount With Smooth Cage Rod Bores, 30 Mm Cage System And Sm1 Compatible, M4 And M6 Mounting Holes, Diameter 12.7 Mm Optical Post, Ss, M4 Setscrew, M6 Tap, L 250 Mm, Kinematic Mirror Mount For Diameter 1Inch Optics, Clamping Fork, 44.4 Mm Counterbored Slot, M6 X 1.0 Captive Screw, 5 Pack, Diameter 12.7 Mm Pedestal Post Holder, Spring-Loaded Hex-Locking Thumbscrew, L 79.7 Mm, Mounting Adapter For Diameter 2.75Inch Cf Vacuum Flange, M6 Taps, Cage Assembly Rod, 10Inch Long, Diameter 6 Mm, Right-Angle Kinematic Mirror Mount With Tapped Cage Rod Holes, 60 Mm Cage System And Sm2 Compatible, M4 And M6 Mounting Holes, Horizontal Platform 30 Mm & 60 Mm Cage System, Metric, 50 50 Non-Polarizing Beamsplitter Cube, 400 - 700 Nm, 2Inch, Extension Post For Pm3 M Clamping Arm, M4 X 0.7 Threaded, Small Adjustable Clamping Arm, M4 X 0.7 Threaded Post, Large Adjustable Clamping Arm, M4 X 0.7 Threaded Post, Extension Post For Pm4 M Clamping Arm, M4 X 0.7 Threaded, 60 Mm Cage Plate With Diameter 2.2Inch Diameter 56.0 Mm Double Bore For Sm2 Lens Tube Mounting, 60 Mm Cage Plate, Sm2 Threads, 0.5Inch Thick, M4 Tap Two Sm2rr Retaining Rings Included, Er Rod Cross Coupler, Top And Bottom Pieces, 5 64Inch 2 Mm Hex Key Thumbscrew, 4 Pack, 30 Mm Cage Plate With Diameter 1Inch Double Bore, M4 Tap, Cage Assembly Rod, 18Inch Long, Diameter 6 Mm, Negative 1951 Usaf Test Target, Diameter 1Inch, Sma Coaxial Cable, Sma Male To Sma Male, 6Inch 152 Mm, Microwave Cable, Sma Male To Sma Male, 24Inch 610 Mm, Sma Coaxial Cable, Sma Male To Bnc Male, 12Inch 304 Mm, Wall Mount Bnc, Sma, Smc, & Fiber Optic Cable Rack, 14 Slot, Bnc Adapter, Straight, Female-Female F-F, Sma Female To Bnc Female Adapter, Sma Male To Bnc Female Adapter, Sma Female To Bnc Male Adapter, Fiber Optic Cleaning Kit, Low-Pass Electrical Filter, Less Than Or Equal To 1 Khz Passband, In-Line Bnc Feedthrough, 50 Ohms Bnc Feed-Through Terminator, 25 Mm Travel Linear Translation Stage, End-Mounted Micrometer, M6 X 1.0 Taps, Yz Stage Assembly Kit For Stages With 3Inch Dovetails, M6 X 1.0 Taps, Sm1 Slotted Lens Tube, 3Inch Thread Depth, 2 Retaining Rings Included, Drop-In 30 Mm To 60 Mm Cage System Adapter, Qty. 1, F 150 Mm, Diameter 2Inch Achromatic Doublet, Arc 400 - 700 Nm, Sm2 Slotted Lens Tube, 2Inch Thread Depth, 2 Retaining Rings Included, Sm2 Lens Tube Without External Threads, 2Inch Thread Depth, Two Retaining Rings Included, Diameter 2Inch Adjustable Lens Tube, 1.31Inch Travel, Slip Ring For Sm2 Lens Tubes, M4 Tap, Lens Mount With Retaining Ring For Diameter 2Inch Optics, M4 Tap, Polaris Right-Handed Diameter 1 2Inch Mirror Mount, 2 Vertical-Drive Hex Adjusters, Monolithic Optic Retention., Fiberport, Fc Apc, F 18.4 Mm, 350 - 700 Nm, Diameter 3.01 Mm Waist, Platform Mount For 1 2Inch Or 12.5 Mm Beamsplitters And Right-Angle Prisms, M4 Tap, 50 50 Non-Polarizing Beamsplitter Cube, 400 - 700 Nm, 1 2Inch ., Large Area Mounted Silicon Photodiode, 350-1100 Nm, Cathode Grounded, Si Photodiode, 10 Ns Rise Time, 350 - 1100 Nm, 3.6 Mm X 3.6 Mm Active Area, Discrete Piezo Ring Stack, 150 V, 9.0 M Displacement, 9.7 Mm Od, 3.0 Mm Id, 9.0 Mm Long, Two Flat End Plates, Discrete Piezo Stack, 150 V, 9.5 Um Displacement, 5.0 Mm X 5.0 Mm X 11.0 Mm, End Hemisphere And Flat End Plate, F 4.0 Mm, Na 0.60, Wd 1.5 Mm, Mounted Aspheric Lens, Arc 350 - 700 Nm
Supply of Cbc:-Coupler Body With Shank Wear Plate For Up- Graded Ht-Cbc .Rdsos Spec. No. Wd-70-Bd -10 Rev. 1 Rdso Drg No. Sk.62724, Alt-25, Item-1 & 10 Warranty Period: 72 Months After The Date Of Delive Ry
Supply of Oh Kit For Schaku Coupler Consisting Of 2 Items S.No. Description Escort S Part No. Qty/Kit 1Slide Plate 40-524-07-74 Or Similar 2 Nos. 2 Thrust Piece 40-524-07-6 4 Or Similar 1 No
Supply Of High Tensile Aar H Type Tight Lock Centre Buffer Coupler Head With Transition Screw Coupling, Balance Draft Gear And Its Associated Components For Fitment On Broad Gauge Passenger Coaches Of Indian Railways As Per Rdso.Spe Cn.No. Rdso/2009/Cg-22, Rev -03 One Coupler Set Shall Consists Of The Following - 1. Tig Ht Lock Coupler Head With Transition Screw Coupling And Its Associated Components Qty. 1 No. 2. Balanced Dr Aft Gear With Pivot Pin Qty. 1 No. 3. Supporting Device For Coupler Head With M20 Fasteners Qty. 1 No. 4. Manu Al Uncoupling Device With M12 Fasteners Qty. 1 No. 5. Rear Carrier Plate For Draft Gear With M16 Fasteners Qt Y. 01 No. 6. Front Carrier Plate For Draft Gear With M16 Fasteners Qty. 1 No. Special Condition:- 1. Maintenance Manual In Soft Copy And Hard Copy Shall Be Supplied With Item. 2. Necessary Test Certificates As Per Rdso .Spec N .No. Rdso/2009/ Cg-22 Rev -01 Shall Be Supplied With Item. 3. Rev.03 Or Latest Revision Of Specification Rds O/2011/Cg-03 Referred In Rdso/2009/Cg-22 Rev -01 Shall Be Followed. 4. Tenderer To Submit Rdso Approved Drawings At The Time Of Quoting The Tender. Safety Item. Warranty Period: 84 Months From The Date Of Supply Or 72 Months From The Date Of Fitment, Whichever Is Earlier As Per Specification No. Rdso/2011/Cg-03 Rev.-3. Ma Ke - Escorts Limited Only Warranty Period: 30 Months After The Date Of Delivery
Supply of Improved High Tensile Tight Lock Center Buffer Coupler With Aar-H Type Head And Balanced Draft Gear For Fitment On Bg Passenger Coaches Confirming To Rdso Specification No. Rdso/2011/Cg-03 Rev.-3 Co Nsisting Of 6 Items, Sl. No. 1. Tight Lock Coupler Head Aar-H Type With Main Pin. Qty. 1 No., Sl. No. 2. Balance Draft Gear. Qty. 1 No., Sl. No. 3. Supporting Device With Fasteners. Qty. 1 No., Sl. No. 4. Manual Uncoupling Devic E. Qty. 1 No., Sl. No. 5. Base Plate With Fasteners. Qty. 1 No. And Sl. No. 6. Support Plate With Fasteners. Qty. 1 N O. Matl. & Spec. : Rdso/2011/Cg-03 Rev.-3. Warranty Period: 84 Months After The Date Of Delivery
Supply of Foot Plate Arrangement For Semi Permanent Schaku Coupler To Icf Drg N O : Icf/Sk-2-5-082, Col I, Alt : E Warranty Period: 30 Months After The Date Of Delivery
Supply Of Mild Steel Shuttering Plates Size 1Mtrx1mtr, Mild Steel Shuttering Plates Size 1Mtrx0.4Mtr, Mild Steel Base Plate With Centre Mounting Pipe 3 Cm Dia And 10 Cm Long, Adjustable U Head Jack, Ismb 150Mm 6 Mtr Length, Hardwood Wooden Planks Size 10Inch 1 3Inch 10 Feet, Grouting Machine With All Accessories Complete Set In All Respect, Electrolyte For Batteries, Coupler Male And Female With Sealing Ring For Coupler Dia 20 Mm, Semiautomatic Air Tin Lubricator 1Pt3 Ltr Capacity, Towing Bar Heavy Duty 2 Mtr Length And 7Cm Dia, Towing Chain Heavy Duty 8 Mm Dia, D Clamp Heavy Duty 16 Mm Dia And 12 Cm Length
Supply of Coupler Body With Shank Wear Plate For Boxnhl Wagons Conforming To Rdso Specification No. Wd-70-Bd-10 Rev.03 To Rdso Drg. No. Sk-62724, Item No. 01 & 10, Alt.28 / Latest. Warranty Period: 72 Mon Ths After The Date Of Delivery
Supply of Coupler Body With Shank Wear Plate Conforming To Rdso Specification No. Wd-70-Bd-10, Rev.03 To Rdso Drg. No. Sk-62724, Item No. 01 & 10, Alt. 28/ Latest Warranty Period: 72 Months After The Date Of Deliv Ery Coupler Body With Shank Wear Plate Conforming To Rdso Specification No. Wd-70-Bd-10, Rev.03 To Rdso Drg. No. Sk-62724, Item No. 01 & 10, Alt. 28/ Latest Warranty Period: 72 Months After The Date Of Deliv Ery
Supply of Improved High Tensile Tight Lock Center Buffer Coupler With Aar-H Type Head And Balanced Draft Gear For Fitment On Bg Passenger Coaches Confirming To Rdso Specification No. Rdso/2011/Cg-03 Rev.-3 Co Nsisting Of 6 Items, Sl. No. 1 Tight Lock Coupler Head Aar-H Type With Main Pin. Qty. 1 No., Sl. No. 2 Balance D Raft Gear. Qty. 1 No., Sl. No. 3 Supporting Device With Fasteners. Qty. 1 No., Sl. No. 4 Manual Uncoupling Device. Qty. 1 No., Sl. No. 5 Base Plate With Fasteners. Qty. 1 No. And Sl. No. 6 Support Plate With Fasteners. Qty. 1 No. M Atl. & Spec. : Rdso/2011/Cg-03 Rev.-3 Warranty Period: 84 Months After The Date Of Delivery
Supply of Coupler Body With Shank Wear Plate For Up-Graded Ht-Cbc.Drawing No. : Rdsos Drg. No. Sk-6 2724, Alt. 28, Item No. 1 & 10. Material And Specification : Rdsos Spec. No. Wd-70-Bd-10, Rev. 3 Warrant Y Period: 72 Months After The Date Of Delivery
Supply of Coupler Body With Shank Wear Plate Conforming To Rdso Str No. Wd-70-Bd- 10 Rev.3 To Rdso Drg No: Sk- 62724, Items - 1 & 10, Alt : 28. Warranty Period: 72 Months After The D Ate Of Delivery
Supply of Automatic Smoke/Fire Detection With Alarm System In Each Coach As Per Clause 2.9.2 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendu Months After The Date Of Delivery Load Weighing System Including Redundant Weight Sensors At Bogie Level, Junction Boxes For Interfacing Cables, Mating Connectors, Ss Hardware, Cable Markers And Crimp Conta Clause 4.26 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per Coach. Warranty Period: 36 Months Af Complete Air-Conditioning System Passenger Coaches As Per Clause 4.39 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrige Mounted Package Unit Rmpu, Micro-Controller, Control Panel, Bellows, Gaskets And Suitable Drain Arrangement Including Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Powe Hardware And Accessories. One Set Per Coach Note: Quantity Includes 60 Sets As Spares. Warranty Period: 36 Months After The Date Of Delivery 3-Phase To Single Phase Underslung Transformer Of Adequate Capacity Not Less Than 20 Kva For Auxiliary Loadsoperating At 230 V Ac And 110 V Acas Per Clause No. 4.1.1 Xxx Latest Addendum Corrigendum And Annexures. One Number Per Coach Except Pantry Car. Note: Quantity Includes 60 Sets As Spares. Warranty Period: 36 Months After The Da Star - Star 415/415V Transformer With Neutral On Secondary Side Of Adequate Capacity Not Less Than 80 Kva As Per Clause No. 4.1.1 Xxxx Of Rdso Specification No. Rdso/ Annexuresto Cater The Pantry Loads Approx. 80 Kva Operating At 415 V & 230 V. The Transformer Should Also Cater To The 110 V Ac Auxiliary Loads Through Additional Winding.One No Per Pa Period: 36 Months After The Date Of Delivery Set Of Equipment, Switch Gears For Toilet Operation In Emergency Mode In Assembled Form Including Pre-Wired Pump Control Panel Assembly, 750 Va Inverter, Vtc Compres Icf/Elec/175. One Set Per Coach Warranty Period: 36 Months After The Date Of Delivery Event Recorder As Per Clause 4.10And Cab Recording Equipment As Per Clause 4.14Of Rdso Specification No. Rdso/Pe/Spec/ Emu/0196-2019 Rev-0 With All Latest Addendu Months After The Date Of Delivery Complete Pre-Fabricated Driver Desk Housing All The Necessary Equipment And Driver/ Guard Seat, Master Cum Brake Controller, Cab Recording Equipment, Including Crimping Lugs Mating Connectors, Equipment Mounting And Earthing Hardware And Accessories As Per Clause 4.16 & 4.17 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest And Software And Space For Cab Radio, Kavach Tcas, Brake Equipment And Rtis Display Shall Be In The Scope Of Supply.Pneumatic Horns, Rolling Blind And Sun Visors Are Excluded. Item Desk. One Set Per Dtc. Warranty Period: 36 Months After The Date Of Delivery Ccms Centralized Coach Monitoring System As Per Clause 4.44 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum An Of Delivery Speed Indicating Cum Recording Equipment As Per Clause 4.20 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And An Delivery Apc Receiver Compatible With Existing Track Magnets As Per Clause No. 4.1.1 Xxxvii Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addend Months After The Date Of Delivery Electrically Operated Wiper System With Washer Tank As Per Clause No. 4.17.1Iii Of Rdso Specification No. Rdso/Pe/ Spec/Emu/0196-2019 Rev-0 With All Latest Addendum C After The Date Of Delivery Roof Mounted Cab Ac Minimum Capacity 2.0 Tr With Control Panel, Mating Connectors, Water Drain Arrangement In The Unit Including Mounting Frame And Anchoring Arrangem Not Restricted To Rdso Specification No. Rdso/2007/El/Spec/0055 Latest One Set Per Dtc. Note: Quantity Includes 16 Sets As Spares. Warranty Period: 36 Months After Traction Transformer As Per Clause No. 4.3 Of Rdso Specification No.Rdso/Pe/Spec/Emu/0196-2019 Rev.0 With All Latest Addendum Corrigendum And Annexures, With Requir Current Transformers, Potential Transformers, Safety Support Arrangement Including Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Mating Connec Machines Such As Oil Pump, Oil Cooling Blowers Etc. As Per Clause 4.28 Of Rdso Spec .One Set Per Basic Unit Note: Quantity Includes 60 Sets As Spares. Warranty Period: 3 Igbt Or Sic Based Pwm Traction Converter Set As Per Clause No. 4.5 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum Chopper Resistor, Dc Link Earthing Switch, Pre-Charging Resistors And Contactors And/Or Any Other Equipment Necessary To Reduce The Effect Of Other Harmonics On S&T Equipment, Crimping Lu Mating Connectors, Equipment Mounting, Earthing Hardware And Accessories Including Associated Auxiliary Machines As Per Clause 4.28 Of Rdso Spec . One Set For One Motor Coach. Not Months After The Date Of Delivery Three-Phase Fully Suspended Asynchronous Induction Motors Or Permanent Magnet Synchronous Motor Encapsulated Designof Tractionmotor Willalsobe Acceptableas Per Clau 0 With All Latest Addendum Corrigendum And Annexure Compatible With Igbt/Sic Based Traction Converter Power Supply, With Coupling, Gear Box Assembly With All The Required Fasteners, Reac Equipment Including Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Mating Connectors, Along With All The Required Hardware, Metal Bonded Rubber Item And Earthing Hardware And Accessories . One Set Consists Of 4 Traction Motor Assembly Note: Quantity Includes 180 Sets As Spares. Warranty Period: 36 Months After The D Set Of Metal Oxide Gapless Lightning Arrestors 02 Nos. For 25 Kv Ac As Per Clause No. 4.4 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Ad Quantity Includes 120 Sets As Spares. Warranty Period: 36 Months After The Date Of Delivery Igbt/ Sic Based Auxiliary Converter Catering Power Supply Toall Auxiliariesas Per Clause No. 4.28 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev- 0 With All La Per Clause No. 4.28.18 Of Rdso Spec. The Supply Shall Include Fasteners, Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Mating Connectors, Equipm Set Per Basic Unit. Note: Quantity Includes 60 Sets As Spares. Warranty Period: 36 Months After The Date Of Delivery Battery, Battery Box And Battery Charger Including Battery Management Systemas Required As Per Clause 4.29 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 R Unit. Warranty Period: 36 Months After The Date Of Delivery Pantograph With Mounting Insulators, Pneumatic Control Panel, Panto Isolating Cocks Including Interconnecting Bus Barsand Associated Stainless Steel Mounting Hardware, Matin 4.43 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. Pantograph Set Note: Quantity Includes 40 Sets As High Reach Pantograph As Per Clause 4.43 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures With Moun Interconnecting Bus Barsand Associated Stainless Steel Mounting Hardware, Mating Connectors - Single Pantograph Suitable For 25Kv Ac Supply . Hr Pantograph Set Note: Quantity In Of Delivery Set Of Two Vcbs With Earthing Switch For Traction Circuit Protection And Ht Cable Protection As Per Clause No. 4.27.1 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Basic Unit. Note: Quantity Includes 60 Sets As Spares. Warranty Period: 36 Months After The Date Of Delivery Design And Supply Of Electrical Under Frame Cable Ducts/Trays/Conduits Up To Various Equipment Of The Train Not Limited To Sor Items With Mounting And Earthing Hardware And Specification No. Rdso/Pe/Spec/ Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per Basic Unit Warranty Period: 36 Months After The Date Of Deli Microprocessor Based Train Control And Management System Tcms As Per Clause No.4.9 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Diagnosis And Display System In The Driving Cab And Multiplexing System For Relevant Control & Other Signals, Remote Diagnostics And Tracking System, Wheel Slip/Slide Protection & Anti-Skid Co System, Brake System And Fire Detection System. One Set Per End Basic Unit Warranty Period: 36 Months After The Date Of Delivery Microprocessor Based Train Control And Management System Tcms As Per Clause No.4.9 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Diagnosis And Display System In The Driving Cab And Multiplexing System For Relevant Control & Other Signals, Remote Diagnostics And Tracking System, Wheel Slip/Slide Protection & Anti-Skid Co System, Brake System And Fire Detection System. One Set Per Middle Basic Unit Warranty Period: 36 Months After The Date Of Delivery Set Of Control Equipment Such As Relays, Contactors, Circuit Breakers And Related Switchgears Etc. For Propulsion System, Controls And Auxiliaries In The Assembled Form Viz. Cub Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. The Scope Also Includes Electrical Switch Gears For Mini -Pantry Equipment In Each Coach. On Delivery Set Of Control Equipment Such As Relays, Contactors, Circuit Breakers And Related Switchgears Etc. For Propulsion System, Controls And Auxiliaries In The Assembled Form Viz. Cub Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. The Scope Also Includes Electrical Switch Gears For Mini -Pantry Equipment In Each Coach Incl Months After The Date Of Delivery High Voltage Cable Running On The Roof For Feeding Adjacent Unitsas Per Clause No. 4.27.3 Excluding Vcb And Earthing Switch And Transformer Ht Cable With Protection Shield Mechanical Including High Voltage Insulator, Inter Car Jumper Cableassemblywith Automatic Or Semi- Automatic Decoupling Arrangement Along With Crimping Lugs, All Mounting & Earthing Har Above Roof Area Of Rdso Specification No. Rdso/Pe/Spec/Emu/ 0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexuresone Set Per End Basic Unit. Warranty Period: 3 High Voltage Cable Running On The Roof For Feeding Adjacent Units As Per Clause No. 4.27.3 Excluding Vcb And Earthing Switch And Transformer Ht Cable With Protection Shield Mechanical, High Voltage Insulator, Inter Car Jumper Cable Assembly With Automatic Or Semi- Automatic Decoupling Arrangement Along With Crimping Lugs, All Mounting & Earthing Hardware, Roof Area Of Rdso Specification No. Rdso/Pe/Spec/Emu/ 0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexuresone Set Per Middle Basic Unit. Warranty Period: 36 M Power, Control, Data / Communication Cables, Fire Survival Cables In Preharnessed Form As Per Clause 4.42.13 Including Crimping Lugs, Suitable Connectors, Cable Markers With Jacket Etc. As Per Clause No. 4.42And Other Relevant Clauses Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One S Power, Control, Data / Communication Cables, Fire Survival Cables In Preharnessed Form As Per Clause 4.42.13 Including Crimping Lugs, Suitable Connectors, Cable Markers With Jacket Etc. As Per Clause No. 4.42And Other Relevant Clauses Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One S Delivery Inter-Vehicular Couplers Power And Control With Coach Jumper Cable Assembly Assembled On Ss Plate Including Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves, Ma Associated Accessories As Per Clause No. 4.42Of Rdso Specification No.Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per End Ba Inter-Vehicular Couplers Power And Control With Coach Jumper Cable Assembly Assembled On Ss Plate Including Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves, Ma Associated Accessories As Per Clause No. 4.42Of Rdso Specification No.Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per Middle Warranty Period: 36 Months After The Date Of Delivery Epdm & Emc Type Cable Glands For Sealing & Shielding Including Mounting Hardware And Fixing Brackets Generally Conforming To But Not Restricted To Rdso Specification No. Rd Period: 36 Months After The Date Of Delivery Epdm & Emc Type Cable Glands For Sealing & Shielding Including Mounting Hardware And Fixing Brackets Generally Conforming To But Not Restricted To Rdso Specification No. Rd Period: 36 Months After The Date Of Delivery Passenger Car Surveillance System Including Cctv Camerawith Nvr In Suitable Place For Cab Recording, Front View Camera, Rear View Camera In Dtc And Pantograph View C Per Clause 4.13 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 With All Latest Addendum Corrigendum And Annexures. One Set Per End Basic Unit. Warranty Period: 36 Mont Passenger Car Surveillance System Including Cctv Camera With Nvr In Suitable Place Including Rear View Camera In Ndtc And Pantograph View Camera In Pantograph Coac Specification No. Rdso/Pe/Spec/Emu/0196-2019 With All Latest Addendum Corrigendum And Annexures. One Set Per Middle Basic Unit. Warranty Period: 36 Months After The Date Of Deliv Design And Supply Of Electrical Roofcable Ducts/Trays/Conduits Up To Various Equipment Of The Train Not Limited To Sor Items With Mounting And Earthing Hardware And Associa Specification No. Rdso/Pe/Spec/ Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per Dtc. Warranty Period: 36 Months After The Date Of Delivery Design And Supply Of Electrical Roof Cable Ducts/Trays/Conduits Up To Various Equipment Of The Train Not Limited To Sor Items With Mounting And Earthing Hardware And Assoc Specification No. Rdso/Pe/Spec/ Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per First Ac Coach. Warranty Period: 36 Months After The Date Design And Supply Of Electrical Roofcable Ducts/Trays/Conduits Up To Various Equipment Of The Train Not Limited To Sor Items With Mounting And Earthing Hardware And Associa Specification No. Rdso/Pe/Spec/ Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per Second Ac Coach. Warranty Period: 36 Months After The Da Design And Supply Of Electrical Roofcable Ducts/Trays/Conduits Up To Various Equipment Of The Train Not Limited To Sor Items With Mounting And Earthing Hardware And Associa Specification No. Rdso/Pe/Spec/ Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per Third Ac Coach. Warranty Period: 36 Months After The Date Design And Supply Of Electrical Roofcable Ducts/Trays/Conduits Up To Various Equipment Of The Train Not Limited To Sor Items With Mounting And Earthing Hardware And Associa Specification No. Rdso/Pe/Spec/ Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per Pantry Car. Warranty Period: 36 Months After The Date Of De
