Supply Of Special Heat Treatment Fixtures Are To Be Manufactured As Per Drawings - Heat Treatment Fixture, Etc
Supply Of High Tensile Aar H Type Tight Lock Centre Buffer Coupler Head With Transition Screw Coupling, Balance Draft Gear And Its Associated Components For Fitment On Broad Gauge Passenger Coaches Of Indian Railways As Per Rdso.Spe Cn.No. Rdso/2009/Cg-22, Rev -03 One Coupler Set Shall Consists Of The Following - 1. Tig Ht Lock Coupler Head With Transition Screw Coupling And Its Associated Components Qty. 1 No. 2. Balanced Dr Aft Gear With Pivot Pin Qty. 1 No. 3. Supporting Device For Coupler Head With M20 Fasteners Qty. 1 No. 4. Manu Al Uncoupling Device With M12 Fasteners Qty. 1 No. 5. Rear Carrier Plate For Draft Gear With M16 Fasteners Qt Y. 01 No. 6. Front Carrier Plate For Draft Gear With M16 Fasteners Qty. 1 No. Special Condition:- 1. Maintenance Manual In Soft Copy And Hard Copy Shall Be Supplied With Item. 2. Necessary Test Certificates As Per Rdso .Spec N .No. Rdso/2009/ Cg-22 Rev -01 Shall Be Supplied With Item. 3. Rev.03 Or Latest Revision Of Specification Rds O/2011/Cg-03 Referred In Rdso/2009/Cg-22 Rev -01 Shall Be Followed. 4. Tenderer To Submit Rdso Approved Drawings At The Time Of Quoting The Tender. Safety Item. Warranty Period: 84 Months From The Date Of Supply Or 72 Months From The Date Of Fitment, Whichever Is Earlier As Per Specification No. Rdso/2011/Cg-03 Rev.-3. Ma Ke - Escorts Limited Only Warranty Period: 30 Months After The Date Of Delivery
Design, Manufacturing And Supply Of Computerised Numerically Controlled Cnc Beam Line Wel Ding Machine Along-With All Concomitant Accessories Duly Conforming To Technical Specification No. Cr/Ir/Cnc- Blwm/With Works/2024, Important Features Of The Tender And Formats & Drawings I.E. Section Iv, V & Vi E Nclosed. Warranty Period: 24 Months After The Date Of Delivery Camc Of 5 Years After Expiry Of Comprehensive Warranty Period Of 02 Years For The Cnc Beam Lin E Welding Machine I.E. Item # 01 Warranty Period: 2 Years, Amc Period: 5 Years, Rate Of Discounting: 10 % Construction Of Foundation, Installation, Testing, Commissioning And Proving- Out On Turnkey Basis For The Cnc Beam Line Welding Machine I.E. Item # 01
Consultancy Services For Re Designing And Replacement Works Of Fire Water Pipeline, 5 Design Philosophy P And Id Flow Diagram Ga And Hydraulic Analysis Methodology For Replacement Redesigning Of Sprinkler And Pressure Relief Mechanism Pedestal Drawings Revalidation And Other Requirements
Supply of Set Of Blind Installation Lh & Rh To Set List No. El29170059 Rev-1, Spec No. C Lw/Ms/3/035Alt-4 And Str No. Clw/2020/Eldo/Ms/Str/101 Rev 1. Drawings As Per Set List N O. El29170059 Rev-1. Warranty Period: 186 Months After The Date Of Delivery
Supply of Thrust Piece For Schaku Coupler To Item No. 6 Of Schaku Drg. No. 40-588-07 2 Or Equivalent. The Drawings Submitted By The Bidders Must Be Approved By Rdso. Warranty Period: 30 Months After The Date Of Delivery
Supply of Set Of Ss Pipe Fittings Consisting Of 5 Items For Air-Brake System Conforming To Rdso Specifica Tion No. 04- Abr-2002, With 8 Amendments Drg To Rcf Full Description Of The 5 Items And Drawings Attached In Documents Column. Warranty Period: 30 Months After The Date Of Delivery
Supply of Yaw Damper For Train-18 Coaches To Drg.No.Train18/Mc/Ac-0-5-012, Item-1, Alt- A. This Is Conceptual Drawing Only. Firm Has To Submit Oem Drawings With Detailed Di Mensions & Characteristics And Type Test Reports Confirming To Rdso 18005.Rev.01Of J Uly 2023 Also To Submitted. Warranty Period: 30 Months After The Date Of Delivery
Carrying Out Geotechnical Studies, Preparation Of Construction Of With Lhs & Preparing Detailed Drawings & Design In Connection With Lieu Of Existing Lc No. 269 In At Km 304/5-6 Jjn-Rsh Section.
Supply of Set Of Stainless Steel Louvre Assembly To Set List El 29170205 Rev.-0, Clw Spec. No.Clw/Ms/3/097 Alt-2, Drawings To Set List El 29170205Rev.-0, And Str No.Clw/2015 /Eldo/M/Str/56 Rev 0. Warranty Period: 72 Months After The Date Of Delivery
Supply of Repair Kit For Brake Cylinder 355 Mm Consisting Of 2 Items. Sl. No. 1 : Wear Ring To Rdso, S Drg. No. Wd-92051-S-09, Alt. 2, Item No -3, Qty Per Kit - 1 No. And Sl. No. 2 : Piston Packing To Rdso, S Drg. No. Wd- 92051-S-10, Alt. Nil, Qty Per Kit - 1 No. Material & Specification : Conforming To Rdso, S Spec No. 02 Abr -02 With Amend. No. 4 Of Sept.2016. Remarks - Rdso, S Drawing No.Wd-92051-S-09 & Wd-92051-S-10 Are The Part Drawings Of The Rdso, S Drawing No. Wd-92051-S-06, Alt.5 Warranty Period: 36 Months After The Date Of Delivery
Supply Of 500 Ah 24 V Vrla Battery Comprising Of 12 Nos. Of 2 V Modules Alo Ng With Inter-Cell Connectors Generally Conforming To Rdso Spec.No. Rdso/Pe/Spe C/Ac/0009-2014 Rev.2. The Battery Shall Be Suitable For 1600 Hp Engine Starting Meetin G The Following Duty Cycle: Engine Cranking Profile For 1600 Hp Demu Engine: Maxim Um Cranking Current- 800A Battery Voltage Shall Not Fall Below 20 Vo1ts. Cranking C Ycle Consists Of Following Sequence 1St Start: 15 Seconds On And 10 Seconds Off 2Nd Start: 15 Seconds On And 10 Seconds Off 3Rd Start: 15 Seconds On And 10 Secon Ds Off 3 Cranking Cycles Can Be Performed With Time Interval Of 2 Minutes Between The Cycles. Next Set Of Cranking Cycle Can Be Followed After Time Interval Of 10 Min Utes. The Battery Shall Be Supplied Along With Frame Arrangement Suitable For Acc Ommodating 500 Ah 24 V Vrla Battery. The Overall Arrangement Of The Frame Shall B E As Per Drg. No.Icf /Sk3- -7-2-050. However, Any Modification Required On This Arrange Ment To Accommodate 500 Ah Vrla Battery Can Also Be Carried Out In Consultation A Nd Approval Of Icf. Note: A. The Oga Drawings And Bom Shall Be Got Approved Before Commencement Of Prototype Unit. B. One Prototype Sample Shall Be Submitted For A Pproval, Before Commencement Of Bulk Supply. Warranty Period: 36 Months After The Date Of Delivery
Design Manufacture And Supply Of High Tensile Aar H Type Tight Lock Cent Re Buffer Coupler Head With Transition Screw Coupling And Its Associated Compon Ents For Fitment On Broad Gauge Passenger Coaches Of Indian Railways As Per Rds O.Specn.No. Rdso/2009/Cg-22, Rev -01 One Coupler Set Shall Consists Of The Following 1.Tight Lock Coupler Head With Transition Screw Coupling And Its Associated Compo Nents 1 No Rdso Approved Firm Drgs. 2.Balanced Draft Gear With Pivot Pin 1 No Rdso Approved Firm Drgs. 3.Supporting Device For Coupler Head With M20 Fasteners 1 No Rdso Approved Firm Drgs. 4.Manual Uncoupling Device With M12 Fasteners 1 No Rdso Approved Firm Drgs. 5.Rear Carrier Plate For Draft Gear With M16 Fasteners 1 No Rd So Approved Firm Drgs. 6.Front Carrier Plate For Draft Gear With M16 Fasteners 1 N O Rdso Approved Firm Drgs. Special Condition : 1. Maintenance Manual In Soft Copy And H Ard Copy Shall Be Supplied With Item. 2.Necessary Test Certificates As Per Rdso .Spe Cn .No. Rdso/2009/Cg-22 Rev -01 Shall Be Supplied With Item. 3. Rev.03 Or Latest Revision Of Specification Rdso/2011/Cg-03 Referred In Rdso/2009/Cg-22 Rev -01 Shall Be Followe D. 4. Tenderer To Submit Rdso Approved Drawings At The Time Of Quoting The Tender. Safety Item Warranty Period: 84 Months After The Date Of Delivery
Design, Manufacture And Supply Of Improved High Tensile Tight Lock Cent Re Buffer Coupler With Aar H Type Head, Balanced Draft Gear And Its Associated C Omponents For Fitment On Broad Gauge Passenger Coaches Of Indian Railways As Pe R Rdso Spec.No.Rdso/2011/Cg-03, Rev-03. Coupler Mounting Arrangement On Under Fra Me Shall Be Generally To Icf Drg.No.Lwgfac-2-1-001 Alt E. One Coupler Set Shall Con Sists Of The Following 1.Tight Lock Coupler Head And Associated Components Refe Rence Rdso Approved Firm Drawings-Qty -1 No. 2.Balanced Draft Gear With Pivot Pin Reference Rdso Approved Firm Drawings-Qty 1 No. 3.Supporting Device For Coupler Head With M20 Fasteners Reference Rdso Approved Firm Drawings -Qty 1 No. 4.Manu Al Un Coupling Device With M12 Fasteners Reference Rdso Approved Firm Drawings - Qty -1 No. 5.Rear Carrier Plate For Draft Gear With M16 Fasteners Reference Rdso Approved Firm Drawings -Qty -1 No. 6.Front Carrier Plate For Draft Gear With M16 Fa Steners Rdso Approved Firm Drawings-Qty -1 No. Special Condition : 1. Maintenance Manu Al In Soft Copy And Hard Copy Shall Be Supplied With Item 2.Necessary Test Certifica Tes As Per Rdso .Specn .No. Rdso/2011/Cg-03, Rev-03 Shall Be Supplied With Item 3. Tende Rer To Submit Rdso Approved Drawings At The Time Of Quoting The Tender. 4. Packing Condition: Items Are To Be Packed In Two Different Boxes As Given Below. I. List Of Ite Ms To Be In Box-1 1. Balanced Draft Gear With Wedge Block Assembly & Wedge Block. 2 . Rear Carrier Plate 3. Fornt Carrier Plate 4. Fasteners For Front And Rear Carrier Plates. Ii. List Of Items To Be In Box-2 1. Coupler Head And Associated Components. 2. M Ain Pivot Pin. 3. Supporting Device For Coupler Head. 4. Fasteners For Supporting De Vice. 5. Manual Coupling Device 6. Fasteners For Manual Uncoupling Device. 7. Split Pi Ns For Carrier Plate. 8. Balance Items, If Any.. Instructions For Packing Of Fasteners . 1. Box-1: Item-4 2. Box-2, Item-4, 6 & 7/ Each To Be Packed And Sealed Separately In Trans Parent Polythene Cover Of Minimum 200 Microns With Appropriate Description Label S Kept Inside For Easy Identification. Safety Item Warranty Period: 84 Months After The Date Of Delivery
Supply of Anti Bird Disc Made Of Acrylic Materials Rating 220 Kv, Pig Tail Type Suitable For Porcelain Type Bra Cket/Stay/9 Tonne Insulators As Per Rdso Drawings No. Ti/Drg/Ohe/Abd/Rdso/00000/19/0 Or Latest. Make/ Brand: Indolite Or Equivalent. Warranty Period: 30 Months After The Date Of Delivery
Supply of Stainless Steel Shims, Made Up Of Stainless Steel 304 Grade To The Drawing Enclosed And To A Thick Ness Of 1.4 Mm Shim To Be Painted With Green Colour On Top Surface, Suitable For Fixing Inner Side Of Mc Inserts Of Psc Sleeper. Weight Approx 25 Gms With Drawings.
Conducting Final Location Survey With Hybrid Modern Survey Technology Using Dgps Integrated Rtk/Ppk Uas Drone Npnt Compliant From Dgca Based Photogrammetric And Lidar System, Conducting Soil Investigation & Preparation And Submission Of Various Detailed Drawings And Preparation Of Estimate And Dpr Of 4Th Line Between Gondia - Nagpur 134.00Km Section & Left Out Sections Of 4Th Line Between Bilaspur - Gondia
Supply of Set Of Items For Water Tank Assembly 455 Liters Two-Piece Design. 1. Filling Connection For Wat Er Tank To Icf Drawing No. Icf/Std6-3-077, Alt. Nil, Qty.- 01 No./Set. 2. Equalizing Connection For Water Tank To Icf Drawing No. Icf/Std-6-3-078, Alt. Nil, Qty.- 01 No./Set. 3. Hex. Pipe Nut G 1 1/2 Inch Confirming To Speci Fication No. Is:3468-91, Tab-1, Galvanized And To Icf Drawing No. Icf/Sk-6-3-444 Item-18, Alt. N/Nil, Qty.-02 N Os./Set. 4. Packing 3Xdia75/49 Confirming To Specification No. Is:11149-84, Type-1, Class-C And To Icf Drawi Ng No. Icf/Sk-6-3-444 Item-17, Alt. N/Nil, Qty.-02 Nos./Set. 5. Sealing Ring Dia15x805 Confirming To Rubber, Hardness 64 To 70 Shore And To Icf Drawing No. Icf/Sk-6- 3-444 Item-16, Alt. N/Nil, Qty.-03 Nos./Set. 6. Pecial Washer 3.15Xdia75/50 Confirming To Specification No. Is:5986-02, Fe 330, Galvanized And To Icf Drawing No. I Cf/Sk 6-3-444 Item-35, Alt. N/Nil, Qty.-02 Nos./Set. Material And Specification Are As Per Respective Drawings. Warranty Period: 12 Months After The Date Of Delivery
Supply of Filter Assembly To Set List No. El-29480103 Rev-1, Clw Spec No. Clw/Ms/03/012 A Lt-6, Drawings As Per Set List El-29480103 Rev-1, And Str No. Clw/2016/Eldo/M/Str/0031 Rev -0. Note: Filter Panel To Be Supplied In Assembled Form. Warranty Period: 30 Months After Th E Date Of Delivery
Supply of Set Of Brass Pipe Fittings For E-70 Brake System Including Kavach Fittings For Wag-9Hc Loco To Set List No. El29230147 Rev 04, As Per Specification: Clw/Ts/99/Cf/5, Alt-8 And Str No. Clw/2020/Eldo/M/Str/0131 Rev-0. Drawings As Per Set List No. El29230147 Rev 04. Warranty Period: 30 Months After The Date Of Delivery Set Of Brass Pipe Fittings For Ccb System Including Kavach Fittings Of Wa G-9Hc Loco To Set List No. El29230354. Rev. 04, As Per Clw Specification No. Clw/Ts/99/Cf/ 5 Alt.-8 And Str No. Clw/2020/Eldo/M/Str/0131 Rev -0. Drawing As Per Set List No. El2923035 4 Rev.-04. Warranty Period: 30 Months After The Date Of Delivery
