Supply of Underframe Brake Gear Arrangement For Boxnhl Wagon To Drg. No. Wd-05086-S-10, Alt.-5, Ite M.-7 & Item.-10. Each Set Comprises Of I. Item.-7: Quantity:- 2 Nos. Ii. Item.-10: Quantity:- 2 Nos. Warra Nty Period: 30 Months After The Date Of Delivery
Supply Of High Tensile Aar H Type Tight Lock Centre Buffer Coupler Head With Transition Screw Coupling, Balance Draft Gear And Its Associated Components For Fitment On Broad Gauge Passenger Coaches Of Indian Railways As Per Rdso.Spe Cn.No. Rdso/2009/Cg-22, Rev -03 One Coupler Set Shall Consists Of The Following - 1. Tig Ht Lock Coupler Head With Transition Screw Coupling And Its Associated Components Qty. 1 No. 2. Balanced Dr Aft Gear With Pivot Pin Qty. 1 No. 3. Supporting Device For Coupler Head With M20 Fasteners Qty. 1 No. 4. Manu Al Uncoupling Device With M12 Fasteners Qty. 1 No. 5. Rear Carrier Plate For Draft Gear With M16 Fasteners Qt Y. 01 No. 6. Front Carrier Plate For Draft Gear With M16 Fasteners Qty. 1 No. Special Condition:- 1. Maintenance Manual In Soft Copy And Hard Copy Shall Be Supplied With Item. 2. Necessary Test Certificates As Per Rdso .Spec N .No. Rdso/2009/ Cg-22 Rev -01 Shall Be Supplied With Item. 3. Rev.03 Or Latest Revision Of Specification Rds O/2011/Cg-03 Referred In Rdso/2009/Cg-22 Rev -01 Shall Be Followed. 4. Tenderer To Submit Rdso Approved Drawings At The Time Of Quoting The Tender. Safety Item. Warranty Period: 84 Months From The Date Of Supply Or 72 Months From The Date Of Fitment, Whichever Is Earlier As Per Specification No. Rdso/2011/Cg-03 Rev.-3. Ma Ke - Escorts Limited Only Warranty Period: 30 Months After The Date Of Delivery
Supply of Digital Ultrasonic Single Rail Tester B Scan Sr 09 Coloured Singles And Real A-Scan Pulse Echo With Continuous Recording Of B-Scan Storage Of Each Probe Along With Data Setups Technical Specific Ation As Per Rdso/M&C/Ndt/128/2017, B-Scan0 Rev-Iv Version 5.0Aug-2021, From Rdso Approved Vendors & Able To Check Rails @ Lc & Approach Locations With Single Rail Trolley Only. Warranty Period: 30 Months After T He Date Of Delivery
Supply of Digital Ultrasonic Double Rail Tester With 9 Probes On Each Rail And Minimum Two Base Lines Coloured Signals And Real A-Scan Pulse Eco With Continuous Recording Of B-Scan Storage Of Each Probe Along With Data Set Ups As Per Rdso Specification No. Rdso/M&C/Ndt/130/2007 B-Scan Rev-Iv, August 2021With Standard Acc Essories Acceptable Make/Brand Similar To Model Drt-2012B-Paras Electronics Make Warranty Period: 3 0 Months After The Date Of Delivery
Supply of Feeler Gauge Set Of Approximate Length 20 Cm 200Mm Long And Width 12M M Containing 13 Different Leaves Of Thickness Sizes, 0.5Mm, 1.0Mm, 2.0Mm, 3.0Mm, 4.0Mm, 5.0 Mm, 6.0Mm, 7.0Mm, 8.0Mm, 9.0Mm, 10.0Mm, 11.0Mm, 12.0Mm Each One Nos Per Set Along With Cali Bration Certificate Traceable To Nabl. Item To Be Made Of Wear Resistant Steel With Zinc Plating.
Supply of Set Of Item As Detailed: 1 Ms Forged T-Union A-Type For 1.682Inc Od Ms Seam Less Pipe .T-Union Should Be With Inside Threading Of 11 Tpi, Qty/Set: 01 No 02 Ms Machi Ned Dummy Plug For 1.628 Inc Od Ms Semless Pipe The Dummy Should Be With Inside Thr Eading Of 11 Tpi Qty Set : 01 No.
Supply of Set Of High Tensile Steel Hexagonal Head Bolts Fully Threaded And Nuts C Onfirming To Is 1364 Bolt Of Property Class 8.8 And Nut Of Property Class 8 Complete With 2 Nos. Punched Plain Washer To Is 2016 1 No Spring Washer To Is 3063 And 1 No. Spli T Pin To Is 549 Of Various Size With Pin Hole Of A Distance 4Mm From Free End And Split Pin Hole Dia As Per Is 549 One Set Consist Of Follwing 8 Items And Qty.2700 Nos. 1 Hex H Ead Bolt M16 X 80 - 25 Nos 2 Hex Head Bolt M12 X 30 - 25 Nos 3 Hex Head Bolt M12 X 50 - 400 Nos . 4 Nut Size M16 - 25 Nos 5 Nut Si Ze M12 - 425 Nos. 6 Plain Washer - 900 Nos 7 Spring Washer- 450 Nos. 8Split Pin - 450 Nos Warranty Period: 30 Months After The Date Of Delivery
Supply of 2 Type Of Tpu Ring For 6Mm As Per Rdso Drg. No.Cg-20057 Secondary Suspension. One Set Co Nsist Of 16 Nos As Per Drg No. Cg-20057 08 Nos. Of Item 1 & Item 2 Each Warranty Period: 30 Months After Th E Date Of Delivery
Supply of Light Weight Push Trolley Complete Set Generally Confirming To Rdso Specification No. Tm/Sm/46 5 Dated 03.02.2014 Rev 01 Of 2020 Enclosed With Following Minor Deviations. 1. Each Trolley Set Comprises Of F Our Wheel And 2 Nos Axle . And Detachable Frame- 1 No. 2.- The Wheel And Axle Set Should Supplied As Per The D Rawing Enclosed. 3. The Frame For The Trolley Shall Be As Per The Drawing Enclosed. 4. The Materials Especially S Teel Used For Fabrication Of Wheel And Axle Should Confirm To Relevant Standards Wherever Applicable. 5. Seating A Rrangements, Any Arrangement For Tool Box And Handles For Pushing Are Not Required In The Trolley Though Mention Ed In The Rdso Specification. 6. Where There Is Any Minor Deviation In The Dimensions Between The Drawing And T He Rdso Specification Is Noticed If Any, The Dimensions In The Enclosed Drawing Shall Be Adopted. 7. Suitable Ins Ulating Pad Or Similar Insulating Material Should Be Provided In The Axle Such That The Two Wheels Are Not Electricall Y Shorted 8. Prototype Approval For The Finished Trolley Is Not Mandatory But Preferred. 9. Inspection Will Be Carried Out By Consignee. Encl: 1. Rdso Specification No.Tm/Sm/465 Dt.03.02.2014 Rev 01 Of 2020 Warranty Perio D: 30 Months After The Date Of Delivery
Supply of Wheel Set Earthing Equipment To Rcf Spec.No.Edts 101, Rev-Camendment 1 Correction 2 Specn: Edts101.Rev A Warranty Period: 30 Months After The Date Of Delivery
Supply of Aerosol Generator - Each Unit Of 500 Gms Fire Detection And Suppression Catridge For Train Set Coaches To Drawing Number Ts/Mc-6-4-013, Alt-A Item- 1. And As Per The Technical Requireme Nt Specified In Annexure-G Of Rdso. Spec. Rdso/Pe/Spec/Ac/0184-2015 Rev-1. Note: Annexure G1 Of Rds O Specification Rdso/Pe/Spec/0192 Rev-1 Is Also Permitted, However It Should Not Affect The Aesth Etics Of The Toilets And Performance Of The System. Warranty Period: 30 Months After The Date Of Delivery
Supply of Set Of Spring Loaded Switch 6Amp-250 Volts For Zpt, Bldj, Blho Pos No. 129, 134, 169.1 Type Sbm-F/T Ou/ 21/22/R20 As Per Clw-Specn. No. Clw/Es/3/0075 Alt. A Each Set Consists Of One Zpt, Bldj, Blho. Warranty Period: 3 0 Months After The Date Of Delivery
Supply of Set Of Bio Digester Tank For Lhb Type Coaches, As Per Rdso Assy. Drg. No C G-18100, Alt- 1 Or Latest, Required Item No 1 And Item No 8. Set Consisting Of Items: I Ite M No 1, Qty 1 No. Ii Item No 8, Qty 1 No. Iii All Items Of Rdso Assy. Drg. No Cg-18100, Alt- 1 Or Latest Required With Each Tank Except Item No 18. Note: For Details Of Item No 1. R Efer Rdso Assy. Drg No Cg-18101 Alt- 1 & Item No 8. Refer Mirror Of Rdso Assy. Drg No Cg-18101 Alt- 1 Warranty Period: 30 Months After The Date Of Delivery
Supply of C Check Kit Suitable For Cummins Make Cpcb-Ii Engine, Model No. Ktaa-19-G-1 0, 500 Kva, 750V Dg Set Of Lhb Power Car Each Set Kit Consisting Of Following Items-1 Element Lube Oil Filter Part No. 3889310, Qty, Per Set 02 Nos. 2 Element Oil By Pass Filter Part No. 388931, Qty, Per Set 01 No. 3 Separator Fuel Water Part No.3329289, Qty, Per Set 02 Nos. 4 Element Crn Resistor Part No. 4072352, Qty, Per Set 01 No. 5 Foil Sealed Test Strips Cc2 602B Part No. 3403800, Per Set 01 Nos. 6 Gasket Rocker Lever Cover Part No. 4920076, Qty, Per Set 06 Nos. 7 Element Air Cleaner Part No. 4020551, Qty, Per Set 01 No. 8 Element Air Cle Aner Part No 4020552, Qty, Per Set 01 Nos 9 Inhibitor Corrosion, Part No. 4926654 Qty. Per Set 10 Liters . Specn: Model No. Ktaa-19-G-10, 500 Kva, 750V Dg Set Warranty Period: 30 Months After The Date Of D Elivery
Supply of B Check Kit Suitable For 500 Kva Dg Set Make Cummins Model No. Ktaa19g10 Each Consisting Of Following Items, Element Lube Oil Filter -02 Nos., Part No. 3889310, Element Bypass Oil Filter -01, Part No. 38893 11, Separator Fuel Water -02 No., Part No. 3329289, Element Crn Resistor -01 No., Part No. 4072352, Inhibitor Co Rrosion 10 Ltr.- 01 No. Part No. 4926654 For Lhb Power Car. As Per Drg.No. N/A Specn: N/A Warranty Period: 30 Months After The Date Of Delivery
Supply Of Fixed Type Air Circuit Breaker For Power Cars Conforming To Iec 60947Part 1 & 2 Of Rati Ng 800 Amps, 3 Pole, 750 V, 50Ka Breaking Capacity With 6 No+ 6 Nc Auxiliary Contact Blocks, Manually Operat Ed With Under Voltage Release, Earth Fault Release With 30% / 40% / 50% Setting And Built In Cts And Arc Chute 75 0V, Thermal Magnetic Dn 1 Auxiliary Contact Uv/ Ef Release Equivalent To Abb Cat No- E2n800 Or Ge Cat No- Rms-9D Or L&T Cat No. Cn -Cs 800C As Per Rcf Spec. No. Edts 103, Revd. Amd.7. Make:- L&T, Abb, Ge Note-: Offer Accepted Only Oem Or His Authorized Dealers. Firm Should Supply Test Certificate & Guaranty Certific Ate Along With Supply Of Item. Warranty Period: 30 Months After The Date Of Delivery
Supply of 180 Cam Lock Of Godrej Make Each Set Comprising Of 1 N Lock 2 N Keys Product Code 8297 Lkywfc507 Q3
Supply Installation & Commissioning Of One Set Spare Items For Re- Installation Of Weigh Bridge/Rn Y, One Set Consisting Of The Following Items- 1. Supply Of Cable For New Weigh Bridge House To Existing Weigh Bri Dge- 1 Job, 2. Stabilizer-01 No., 3. Signal Lamp-02 Nos., 4. Junction Box With Stand-01 No., 5. Earthing For Weig H Cabine-1 Job, 6. Electrical Connection With 3 Phase Room Wiring- 1 Job, 7. Charges For Spd As Per Rdso- 01 No., 8. Dismantling & Shifting Of Necessary Parts Of In- Motion Weigh Bridge From The Existing Weigh House To Ne W Weigh House- 01 Job., 9. Re- Installation & Commissioning Of In Motion Weigh Bridge, Calibration & Stamping By Ilm- 01 Job. Make- Digital Weighing System- P Ltd, Bilaspur C.G. The Details Description & Specification Are Enclosed As Per Annexure- A Warranty Period: 30 Months After The Date Of Delivery
Repair Maintenance Of Dg Sets Of Various Capacities In The Aor Of Ge East Under Ge East
Procurement Of Bucket Elevator Spares For Ccl Washeries - Bucket Elevator, Size: 1250Mm. Unit No. 208, Bucket & Chain Link Assembly :Each Set Consist Of 57 Sub-Sets And Each Sub-Set Consists Of The Following: Abucket, Matl.Is:226 -1No.Bouter Links, En-45, Forged And Heat Treated - 14 Nos. C Link Riveted With Bucket, En-45, Forged And Heat Treated -2 Nos.D Tie Rod, En-8 -2Nos. E Bush, En-8 -4Nos. F Split Pin-4 Nos. The Holes Of The Link Should Be Core Hardened. Material Is To Be Supplied In Assembled Condition Of 5 Subset, Etc