Supply of Feeler Gauge Set Of Approximate Length 20 Cm 200Mm Long And Width 12M M Containing 13 Different Leaves Of Thickness Sizes, 0.5Mm, 1.0Mm, 2.0Mm, 3.0Mm, 4.0Mm, 5.0 Mm, 6.0Mm, 7.0Mm, 8.0Mm, 9.0Mm, 10.0Mm, 11.0Mm, 12.0Mm Each One Nos Per Set Along With Cali Bration Certificate Traceable To Nabl. Item To Be Made Of Wear Resistant Steel With Zinc Plating.
Supply Of High Tensile Aar H Type Tight Lock Centre Buffer Coupler Head With Transition Screw Coupling, Balance Draft Gear And Its Associated Components For Fitment On Broad Gauge Passenger Coaches Of Indian Railways As Per Rdso.Spe Cn.No. Rdso/2009/Cg-22, Rev -03 One Coupler Set Shall Consists Of The Following - 1. Tig Ht Lock Coupler Head With Transition Screw Coupling And Its Associated Components Qty. 1 No. 2. Balanced Dr Aft Gear With Pivot Pin Qty. 1 No. 3. Supporting Device For Coupler Head With M20 Fasteners Qty. 1 No. 4. Manu Al Uncoupling Device With M12 Fasteners Qty. 1 No. 5. Rear Carrier Plate For Draft Gear With M16 Fasteners Qt Y. 01 No. 6. Front Carrier Plate For Draft Gear With M16 Fasteners Qty. 1 No. Special Condition:- 1. Maintenance Manual In Soft Copy And Hard Copy Shall Be Supplied With Item. 2. Necessary Test Certificates As Per Rdso .Spec N .No. Rdso/2009/ Cg-22 Rev -01 Shall Be Supplied With Item. 3. Rev.03 Or Latest Revision Of Specification Rds O/2011/Cg-03 Referred In Rdso/2009/Cg-22 Rev -01 Shall Be Followed. 4. Tenderer To Submit Rdso Approved Drawings At The Time Of Quoting The Tender. Safety Item. Warranty Period: 84 Months From The Date Of Supply Or 72 Months From The Date Of Fitment, Whichever Is Earlier As Per Specification No. Rdso/2011/Cg-03 Rev.-3. Ma Ke - Escorts Limited Only Warranty Period: 30 Months After The Date Of Delivery
Supply of Cross Member, As Per Drawing: 2 10113.1.03.100.177 Alt.-R, Packing Instruction: No Spe Cial Packing Required. The Protruding, Threaded Portion, Gauges And Loose Items E Tc. If Any Are To Be Protected With Suitable Covering To Prevent It From Damage. Ho Wever Transit Damage If Any Shall Be At The Cost Of Supplier., Proction Procedure: Wi10010 0, Quality Plan: Na Warranty Period: 30 Months After The Date Of Delivery
Supply of Set Of Door Cut Out Complete For Lhb Coach., As Per Drawing: Mp20dc&Ahr Ve Rsion 2, Packing Instruction: No Special Packing Required. The Protruding, Threaded Porti On, Gauges And Loose Items Etc. If Any Are To Be Protected With Suitable Covering T O Prevent It From Damage. However Transit Damage If Any Shall Be At The Cost Of Su Pplier. Warranty Period: 30 Months After The Date Of Delivery
Supply of Horizontal Member, As Per Drawing: 2 10113.1.20.113.160 A, Packing Instruction: No Spe Cial Packing Required. The Protruding, Threaded Portion, Gauges And Loose Items E Tc. If Any Are To Be Protected With Suitable Covering To Prevent It From Damage. Ho Wever Transit Damage If Any Shall Be At The Cost Of Supplier., Proction Procedure: Na, Qual Ity Plan: Na Warranty Period: 30 Months After The Date Of Delivery
Supply of Set Of Pressure Gauges As Per Clw Specification No. Clw/Ts/99/Cf/3, Alt-5 Consisting Of 03 Item S : 1 Gauge For Bp 4 Inches, Clw Drg. No. 1209-18-306-225, Alt. 1- 2 Nos. 2 Gauge For Bc-1 & Bc-2 4 Inches, Clw Drg. No. 1209-18-306-224 -2 Nos. 3 Gauge For Mr-Fp 4 Inches, Clw Drg. No. 1209-18-306-223 - 2 Nos. Warranty Period: 30 Months After The Date Of Delivery
Supply of Electric Plaster Cutting Saw Blade . Specification- 1.Stainless Steel Hardened Blade Having Clear He Xagonal Mounting Hole. 2.Blade Can Be Adjusted In Six Positions For Prolonged Use. 3.Useful For Synthetic Plaster/C Ast As Well As Pop. 4.Blade Size: Dia 75 Mm And Dia 65M 5.Depth Control Gauge . 6.Safe Oscillating Type 7.Shoul D Be Compatible With Plaster Cutting Saw Machines Of Standard Companies. Item Code No.: S61113, Ai 23-24
Supply of Meg Items 02, 20 Digital Wall Clock Ajanta Quartz Olc-109 Milton Galaxia 5000 Stainless Steel Casserole 5 Ltr Meyer Pre Seasoned Cast Iron Kadai With Lid 36 Cms Abhjata Wireless Doorbell Kit Upto 1000 Feet Range With 32 Ringtone 15 Adjustable Volume With Led Indicator Sumeet Heavy Gauge Stainless Steel Bowl With Mirror Finish 12.2 Cms Dia
Supply of Battery Box Assembly Schedule Of Infrastructural Requirements For St Ainless Steel Battery Box Complete As Per Specfication No: Mdst 141 Rev.01 , As Per Dra Wing: Cc91205 Alt A, Packing Instruction: No Special Packing Required. The Protruding, Thre Aded Portion, Gauges And Loose Items Etc. If Any Are To Be Protected With Suitable Covering To Prevent It From Damage. However Transit Damage If Any Shall Be At The Cost Of Supplier. Warranty Period: 30 Months After The Date Of Delivery
Supply of Pressure Gauge 100 Mm For Brake Pipe To Rdso Drg. No. Sk.73553, Alt. 5, Conforming To Rdso Specificat Ion No. 02-Abr-02 With Amendment No. 4 Of Sept. 2016, Appendixh. Safety Item Warranty Period: 30 Months After The Date Of Delive Ry
Supply of Set Of Thread Plug Gauges & Ring Gauges Etc.. Thread Plug Guage Baker/Precision/Similarm8 X1.25 6H-01 Make:- Baker Or Master Metr Ology Or Similar Warranty Period: 30 Months After The Date Of Delivery Thread Plug Guage Baker/Precision/Similarsize M20 X 2.5 6H-01 Make:- Baker Or Master Metrology Or Similar Warranty Period: 30 Months After The Date Of Delivery Set Of Thread Plug Gauge Consists Of 1 Thread Plug Gauge Go, M10 X 1.5 - 01 No. 2 Thread Plug Gauge No Go, M10 X 1.5 - 01 No. 3 Thread Plug Gauge Go, M12 X 1.7 5 - 01 No. 4 Thread Plug Gauge No Go, M12 X 1.75 - 01 No. 5 Thread Plug Gauge Go, M24 X 3 - 01 No. 6 Thread Plug Gauge No Go, M24 X 3 - 01 No. Make:- Baker Or Master Metrolo Gy Or Similar Warranty Period: 30 Months After The Date Of Delivery Set Of Thread Ring Go-No-Go Gauges For Lhb Coaches, One Set Of Go-No-G O Thread Gauge Should Have Following Item Description & Qty:- 1. Size M16x2.0 Mm-6G One Thread Ring Gauge Go & No-Go Gauges - 01 Pair 2. Size M20x2.5 Mm-6G One Threa D Ring Gauge Go & No-Go Gauges - 01 Pair 3. Size M8x1.25 Mm-6G One Thread Ring Gau Ge Go & No-Go Gauges - 01 Pair Make:- Baker Or Master Metrology Or Similar Warra Nty Period: 30 Months After The Date Of Delivery Set Of Ring Gauge Consists Of 1 Ring Gauge Go, M10 X 1.5 - 01 No. 2 Ring Ga Uge No Go, M10 X 1.5 - 01 No. 3 Ring Gauge Go, M12 X 1.75 - 01 No. 4 Ring Gauge No Go, M1 2 X 1.75 - 01 No. 5 Ring Gauge Go, M24 X 3 - 01 No. 6 Ring Gauge No Go, M24 X 3- 01 No. Mak E:- Baker Or Master Metrology Or Similar Warranty Period: 30 Months After The Date Of Delivery
Supply of Set Of Items 1. Digital Torque Wrench, Model: Wk4-200Br, 0-100 Nm 1/2 Inch Sq.Drive, Make: Eclato Rq, Torque Range: 10- 200 Nm, Resolution: 0.1 Nm Sq.Drive: 1/2 Inch Length: 530Mm, Pre-Setting No: 9 Sets, Head Type: Lever Type Ratchet, Bright Led: 12 Ld 2 Red +10 Green Battery: Aax2, Battery Life: 110 Hrs Continuous With Pc Connectivity And 250 Data Memory Size - Qty 03 Nos 2. Ir Make Pneumatic Impact Wrench Model: 2235Qxpa Square Drive: 1/2 Inch Max Torque: 1220 Nm Rpm: 8500 Weight: 2.10 Kg Length: 193 Mm Nptf: 1/4 Inch Min. Hose Bore: 10 Mm Noise: 91.9 Dba - Qty 04 Nos 3. Quick Release Cuppler Qrcsize : 1/4 Inch Male X Female Hsn C Ode : 7326 - Qty 04 Nos 4. Filter Regulator & Lubricator Size: 1/2 Inch With Pressure Gauge - Qty 04 Nos 5. Mpact Deep Socket 1/2 Sq.Drive A/F 19 Mm - Qty 04 Nos 6. Impact Deep Socket 1/2 Inch Sq.Drive A/F 24 Mm - Qty 04 Nos 7. Impact Socket 1/2 Inch Sq.Drive A/F 19 Mm - Qty 04 Nos 8. Impact Socket 1/2 Inch Sq.Drive A/F 24 Mm - Qty 04 Nos Warranty Period: 30 Months After The Date Of Delivery
Supply of Digital Wheel Distance Measuring Gauge, Pie Model Wg-1 E Or Equivalent Bg, With Built In Digit Al Display & Spirit Level Specification: Least Count: 0.1 Mm, Accuracy: +/- 0.1 Mm, Measuring Range: 1585 To 16 15 Mm, Least Count 0.1Mm. Make: Pie, Aoge Or Jyoti Or Similar. Item Shall Be Supplied With Calibration Certific Ate From Nabl/Nabl Accredited/Govt. Approved Lab. Warranty Period: 30 Months After The Date Of Delivery
Supply of Set Of Kit For 05 Nos. Of Wag-9 Locos Pneumatic Valves Ventury Valve To Ft Rtil Pt. No. 790002155, Flow Meter Gauge Relay Valve To Ftrtil Pt. No. 790012105, Double Ch Eck Valve To Ftrtil Pt. No. 790002101, Emergency Exhaust Valve To Ftrtil Pt. No. 790003115 & 1 Check Valve To Ftrtil Pt. No.790002115. Set Comprising Of 24 Items 32 Nos. As Per Annexur E Attached Warranty Period: 30 Months After The Date Of Delivery
Design Manufacture And Supply Of High Tensile Aar H Type Tight Lock Cent Re Buffer Coupler Head With Transition Screw Coupling And Its Associated Compon Ents For Fitment On Broad Gauge Passenger Coaches Of Indian Railways As Per Rds O.Specn.No. Rdso/2009/Cg-22, Rev -01 One Coupler Set Shall Consists Of The Following 1.Tight Lock Coupler Head With Transition Screw Coupling And Its Associated Compo Nents 1 No Rdso Approved Firm Drgs. 2.Balanced Draft Gear With Pivot Pin 1 No Rdso Approved Firm Drgs. 3.Supporting Device For Coupler Head With M20 Fasteners 1 No Rdso Approved Firm Drgs. 4.Manual Uncoupling Device With M12 Fasteners 1 No Rdso Approved Firm Drgs. 5.Rear Carrier Plate For Draft Gear With M16 Fasteners 1 No Rd So Approved Firm Drgs. 6.Front Carrier Plate For Draft Gear With M16 Fasteners 1 N O Rdso Approved Firm Drgs. Special Condition : 1. Maintenance Manual In Soft Copy And H Ard Copy Shall Be Supplied With Item. 2.Necessary Test Certificates As Per Rdso .Spe Cn .No. Rdso/2009/Cg-22 Rev -01 Shall Be Supplied With Item. 3. Rev.03 Or Latest Revision Of Specification Rdso/2011/Cg-03 Referred In Rdso/2009/Cg-22 Rev -01 Shall Be Followe D. 4. Tenderer To Submit Rdso Approved Drawings At The Time Of Quoting The Tender. Safety Item Warranty Period: 84 Months After The Date Of Delivery
Design, Manufacture And Supply Of Improved High Tensile Tight Lock Cent Re Buffer Coupler With Aar H Type Head, Balanced Draft Gear And Its Associated C Omponents For Fitment On Broad Gauge Passenger Coaches Of Indian Railways As Pe R Rdso Spec.No.Rdso/2011/Cg-03, Rev-03. Coupler Mounting Arrangement On Under Fra Me Shall Be Generally To Icf Drg.No.Lwgfac-2-1-001 Alt E. One Coupler Set Shall Con Sists Of The Following 1.Tight Lock Coupler Head And Associated Components Refe Rence Rdso Approved Firm Drawings-Qty -1 No. 2.Balanced Draft Gear With Pivot Pin Reference Rdso Approved Firm Drawings-Qty 1 No. 3.Supporting Device For Coupler Head With M20 Fasteners Reference Rdso Approved Firm Drawings -Qty 1 No. 4.Manu Al Un Coupling Device With M12 Fasteners Reference Rdso Approved Firm Drawings - Qty -1 No. 5.Rear Carrier Plate For Draft Gear With M16 Fasteners Reference Rdso Approved Firm Drawings -Qty -1 No. 6.Front Carrier Plate For Draft Gear With M16 Fa Steners Rdso Approved Firm Drawings-Qty -1 No. Special Condition : 1. Maintenance Manu Al In Soft Copy And Hard Copy Shall Be Supplied With Item 2.Necessary Test Certifica Tes As Per Rdso .Specn .No. Rdso/2011/Cg-03, Rev-03 Shall Be Supplied With Item 3. Tende Rer To Submit Rdso Approved Drawings At The Time Of Quoting The Tender. 4. Packing Condition: Items Are To Be Packed In Two Different Boxes As Given Below. I. List Of Ite Ms To Be In Box-1 1. Balanced Draft Gear With Wedge Block Assembly & Wedge Block. 2 . Rear Carrier Plate 3. Fornt Carrier Plate 4. Fasteners For Front And Rear Carrier Plates. Ii. List Of Items To Be In Box-2 1. Coupler Head And Associated Components. 2. M Ain Pivot Pin. 3. Supporting Device For Coupler Head. 4. Fasteners For Supporting De Vice. 5. Manual Coupling Device 6. Fasteners For Manual Uncoupling Device. 7. Split Pi Ns For Carrier Plate. 8. Balance Items, If Any.. Instructions For Packing Of Fasteners . 1. Box-1: Item-4 2. Box-2, Item-4, 6 & 7/ Each To Be Packed And Sealed Separately In Trans Parent Polythene Cover Of Minimum 200 Microns With Appropriate Description Label S Kept Inside For Easy Identification. Safety Item Warranty Period: 84 Months After The Date Of Delivery
Supply of Three Item Is Clubbed 1.Insulated Bar Gauge 2. Digital Inclinometer Digital Level And Protractor 3. Star Gauge. Digital Inclinometer Digital Level And Protractor With A Magnetic Bottom Similar To Loram Part No- 166044 With Vgroove, Resolution 0.1 Degree And Accuracy Of 0.2 Degree. The D Evice Calibrattion Can Easily Be Chacked On Any Plan Surface. Warranty Period: 30 Months After The Date Of Deli Very Insulated Bar Gauge Supplied Along With Five Numbers Templates Made For 1676 Mm Track Gauge U/C 60 Kg Rails Including Amc For 3 Years. Warranty Period: 30 Months After The Date Of Delivery Star Gauge As Per Attached Specification Warranty Period: 30 Months After The Date Of Delivery
Procurement Of Equipment/Item - Gauge Cutting Scissor For The Sc Phc Bphu And Uphc Of The State Under 15Thfc Sch Iv Gauge Cutting Scissor
Supply of Set Of Frame Part Complete And Web For Lhb Power Car Coach, As Per Drawin G: Mp09fcw Version 2, Packing Instruction: No Special Packing Required. The Protruding, Th Readed Portion, Gauges And Loose Items Etc. If Any Are To Be Protected With Suitabl E Covering To Prevent It From Damage. However Transit Damage If Any Shall Be At Th E Cost Of Supplier. Warranty Period: 30 Months After The Date Of Delivery
Supply of Set Of Door Cut Out Complete ., As Per Drawing: Mpdocusrlhb Version 5, Packin G Instruction: No Special Packing Required. The Protruding, Threaded Portion, Gauges A Nd Loose Items Etc. If Any Are To Be Protected With Suitable Covering To Prevent It F Rom Damage. However Transit Damage If Any Shall Be At The Cost Of Supplier., Proction Procedure: N.A, Quality Plan: N.A Warranty Period: 30 Months After The Date Of Delivery