Insulation Tenders

(Select any tender from the list to send an email)
Ref. No #31677879 Central Government/Public Sector Live   GeM Tender

Supply of 1 Tester Q3

Location
Jharkhand
Due Date
18 May, 2024
Amount
Refer Document
Ref. No #31674261 Central Government And Public Sector Live

Supply of Circular Lifting Magnet For Lifting Cold As Well As Hot Material Up To 600Deg C In Foundry Environment . Deep Field Coil Design, Copper Wound For 220V Dc Operation, Must Include 03 Leg Chain And Bail Assembly, Ext Ernal Electrical Connectors And Surge Suppressor, Heavy Duty Cast Magnet Designed For Severe Scrap Handling D Uty Similar To Ohio Make Model 66Dcwx, Confirming To The Following Specification For Single Magnet Characteri Stics- 1. Cold Current - 105 Amps Max. 2. Cold Power- 18.5 Kw 3. Self-Weight Should Not Be More Than 5Ton In Clusive Of Chain, Bail And Other Accessories 4. Duty Cycle: Min. 50%, 24 Hrs./ Day 7 Days/ Week, To Allow Extra Ha Ndling Time Of Hot Materials At 10Minutes Lift Cycle 5. Diameter Of Magnet: 66Inches -1 Inch +3Inch 1650Mm -25. 5Mm/+50Mm 6. Lifting Capacities Shall Not Be Less Than A Pig Iron: H M S - 5200 Lbs. 2359Kgs B Broken/Cu T Scrap: 2700 - 3300 Lbs. 1225-1497Kgs C Steel Turnings: 1700 Lbs. 771Kgs Note: The Tolerance In Lifting C Apacity Must Be +/-25% Of The Above Mentioned Ranges At All Operating Conditions. 7. Magnet Conductor Shall Be Of Premium Electrical Grade Copper With 99.99% Purity With Class H For Maximum Coil Life Under Severe Operation. 8. Magnet Shall Be Of High Grade Cast Steel Welded Construction For Strength And Waterproof. 9. Heavy Duty, Nonmagnetic Bottom Plate & Sealing Plate, Made Of Wear Resistant & Work Hardened Manganese Steel Shall Be Used To Protect The Coil From Damage Caused By Impact Including Bumping Plate. 10. Additional Protection From Moisture & Impact Is To Be Provided To The Coil With The Use Of Non-Magnetic Manganese Sealing Plate.11. Heavy Duty, Annealed Alloy Steel 3-Legged Chain With A Master Hook Bail Is To Be Provided.12. Suspension Lugs Should Be Heavy-Duty & Pins Shall Be Provided To Connect The Chain To The Magnet. 13. Suitable Rating Surge Suppresser Me Tro Cell Shall Be Introduced In The Magnet. 14. Electrical Connectors: - Plug-In Type Connectors Made From A Size Of 25 Sq. Mm 2 - Conductor Type W Magnet Cable, 2000V Dc Rated For Durability And Ease Of Replacement. 15. E Xternal Connectors To Be Clamped And Protected With A Shield. 16. 08 Hrs. Heat Rise To Be Performed To Verify Mag Net Integrity. Temperature Rise Test, High Voltage Test And Resistance Test Should Be Performed And Reco Rded For Traceability And Future Reference. Note: 1. Magnet Must Be Same Or Similar In All Respects To The 66 Inch 1676 Mm Dcwx Model, Ohio Make Magnets. 2. All Relevant Tests And Test Certificates Shall Be Submitted Alon G With The Supply. 3. The Manufacturer Shall Carry Out Continuous Load Test. 4. Warranty: 24 Month From The Date Of Commissioning And Proving Out Of M&P. 5. Stage Inspection By Tpi Before Closing The Magnet And Inspection R Eport To Be Submitted By The Firm To Rwp/Bela With The Supply. 6. Tenderer Shall Indicate The Service Support Avail Ability. Stage Inspection By Tpi Before Closing The Magnet As 100% Of Po Qty. Warranty Period: 24 Months After The Date Of Delivery

Location
Bihar
Due Date
25 May, 2024
Amount
Refer Document
Ref. No #31675889 Central Government/Public Sector Live   GeM Tender

Supply Of Electrical Hardware Equipment - Relay Base 8 Pin, Circular 24V Coil 2 Co Type With Base, Contact Element - Normally Open Contact, 240V, 10A, Contact Element - Normally Close Contact, 240V, 10A, Contact Element - S1 - Normally Close Contact, 240V, 10A Push Button Dia 22 - Red, Contact Element - S1 - Normally Open Contact, 240V, 10A Push Button Dia 22 - Green, Contactor 230V Ac Coil With 4 No, 9Amp Contact Rating, Auxilary Contacts Part No- 1No Plus 1Nc, Auxilary Contacts Part No- 2No Plus 2Nc, Self Locking Push Button Emergency With Key -Emergency Stop Push Button Dia 22, Digital Multimeter, Bakelite Open Connector 12 Way Screw Terminal Block 32A, 230V, Batten Holder, 6A 230V, Selector Switch, 3 Position Part No- Rb2-Bd3, Standard Handle, Dp Switch With Neon 32A 240 V, Din-Rail Chhanel, 1 Meter Length Each, Led Panel Indicator 230V 22Mm Plastic - Red, Led Panel Indicator 230V 22Mm Plastic - Green, Led Panel Indicator 230V 22Mm Plastic - Blue, Led Panel Indicator 230V 22Mm Plastic - Yellow, 6 Amp Piano Switch Spst, 6 Amp Piano Switch Spdt, Buzzer 230V Ac, Limit Switch 230V Ac Heavy Duty, Combinational Spanner Set Css12, Size-6-22, Pvc Electrical Tape, Mcb 16Amp Dp, Mcb 6Amp Dp, 3 Position Rotary Selector Switch With Self Locking 2No, A1d1x 30M Time Switch, Power Requirements- 240 Vac, A1d1x 60M Time Switch, Power Requirements- 240 Vac, Proximity Sensor Capacitive-Pnp, 24 V Dc, Proximity Sensor Capacitivenpn, 24 V Dc, Proximity Sensor Inductive-Pnp, 24 V Dc, Proximity Sensor Inductive-Npn, 24 V Dc, Screw Driver 12Inch Insulated Size- 12 Inch Insulated, Screw Driver Set, Wire Striper Part No- 150B, 0.75 Sqmm Wire Red, Blue, Yellow Colour - Each 2 No, 1.00 Sqmm Wire Red, Blue, Yellow Colour - Each 2 No, 1.50 Sqmm Wire Red, Blue, Yellow Colour - Each 2 No, Neon Teaster 230V Ac, Glass Fuse - 250Milli Amp, Glass Fuse - 300Milli Amp, Bulb 230 V Ac 1Watt, 3Pin Plug Top 16A 240 V, 3Pin Plug Top 6A 240 V, Combination Double Ended Spanner Set Wrench Chrome Vanadium Size 6-32, Drill Machine - Gsb 500 Re Corded-Electric Drill Tool Set, Electrical Hardware Boards

Location
Orissa
Due Date
17 May, 2024
Amount
Refer Document