Supply of Iron Structure Size:Length-82 Inch X Width-36 Inch X Ht 22 Inch Bed Height. Made By 1.5 In Ch, 18 Swg Round Ms Hollow Tube. Both Side Circular Design. Design Height From Bed 16 Inch X 11 Inch, And 2 Inch X 1 Inch Ms Rectangular Box Side Patta And 05 Nos Middle Dassa Will Be Fitted By Hollow Box And Two Side L Eg To Leg Tana Will Be Made By 1 Inch Ms Hollow Tube And Stand Size:5 Ft Length X 3/4 Inch Round Ms Pipe 04 No S. And 16Mm Ply Will Be Fittedply Size:78 Inch X 32 Inch Width.All Structure Items Will Be Rust Treatment For Rust F Ree And Colour Black Powder Coated Paint For Prolong Colour Durability. Materials To Be Supplied Directly To The Follo Wing Stations:- Khari-06 No., Sumber-06 No., Sangaldan-08 No. Warranty Period: 30 Months After The Date Of Delivery
Supply Of Max Min Maint Store Cp Hand Shower Rose With Pvc Tube 1.5 Mtr, Cp Wash Hand Basin Mixture 15Mm, Cp Bib Cock 15 Mm Fancy Type, Cp Shower Rose 15X75 Mm Dia, Cp Towel Rail 600 Mm Long, Float Valve 20 Mm Complete, Cp Bib Cock 15Mm Fancy Type Half Turn, Looking Mirror 24In X20in X3mm Of Plastic Moulded Panel, Cp Stop Cock 15Mm, Cp Bib Cock 15 Mm Long Body, Cp Pillar Cock 15 Mm Fancy Type, Cp Concealed Stop Cock 15 Mm, Glass Shelves Diplomat 600 Mm, Cp Sink Mixer With Coasted Spout 15 Mm, Cp Bib Cock 15 Mm Long Body Half Turn, Float Valve Complete 25 Mm Symet, Ply Wood 6Ft X 3Ft X 12 Mm Bwr Gde As Per Is 303, Sliding Bolt Brass 300 Mm With Nut And Bolt, Looking Mirror 24In X 18Inx3mm Of Plastic Molded Panel, Cp Wall Mixer With Crunch 15Mm Half Turn, Cp Stop Cock Concealed 15Mm Half Turn, Sliding Bolt Brass 250 Mm With Nut And Bolt, Pvc Waste Pipe For Wash Band Basin 1 Mtr Long, Cp Shower Rose 15X150 Mm, Cp Glass Shelve Diplomat 600 Mm, Cp Telephonic Health Faucet With Pvc Pipe 1.5 Mtr, Cp Telephone Hand Shower With Pvc Pipe 1.5 Mtr, Angle Stop Cock 15Mm Half Turn, Cp Angle Cock 15 Mm With Flange, Cp Soap Dish Fancy Type, Cp Pillar Cock 15Mm Half Turn, Cp Pillar Cock 15Mm Fancy Type Half Turn, Cp Angle Cock 15 Mm Half Turn, Cp Soap Dish, Cp Stop Cock 15Mm Half Turn, Cp Waste Coupling 100 Mm Dia For Stainless Steel Sink, Pvc Waste Pipe For Urinal 1 Mtr Long, Cp Waste Coupling 32 X50mm For Stainless Steel Kitchen Sink, Plastic Seat Cover For Ews Colour White, Beeding Pvc Of Size 12 X 6 Mm X 8Ft Long, Cp Waste Coupling 40 Mm Dia, Wire Mesh Width 1200 Mm Length 15 Mtr.0.47Mm, Galvanized Steel Tubing 20 Mm Dia With Socket, Angle Stop Cock Cp 15Mm Two Way Half Turn, Cp Angle Stop Cock 15 Mm, Gi Nipple 15 X 100Mm, Cp Stop Cock Fancy 15Mm External Thread Half Turn, Cp Angle Stop Cock 15 Mm Two Way, Grating Stainless Steel 100 Mm Dia, Kitchen Plate Rack Stainless Steel 85In X 75In, 100 Mm Dia, Kitchen Plate Rack Stainless Steel 85In X 75In, Cp Jet Spray, Cp Wall Mixer With Crunch 15 Mm, Cp Waste Coupling 32 Mm Dia, Door Handle Aluminum 100 Mm, Angle Cock Cp Long Thread 15 Mm, Galvanized Steel Tubing 25 Mm Dia With Socket, Gi Tubing 15 Mm Med Gde, Cp Wall Mixer 15Mm Tely Type, Without Tele Half Turn, Door Handle Aluminum 125 Mm, Cp Rigid Conduit Pipe Ms 15Mm X 12Ft Long For Curtain, Cp Grating 100Mm With 1 Hole Of Waste Pipe, Cp Bkt For Fixing Of Conduit Pipe 15 Mm, Helical Door Spring 150 Mm Length, Hydraulic Door Closer Cast Iron Body Designation No.2, Universal Type, Suitable For Door Shutters Of 701 To 850Mm In Width And Weight Between 36 To 60 Kg, Butt Hinges Ms 100 Mm, Kitchen Stand Stainless Steel Size 775Mm Height 750Mm Width 250Mm Depth, Curtain Rod Aluminum 20Mm, Helical Door Spring 125 Mm Length, Cp Connection Pipe 15 X 375Mm, Tower Bolt Aluminum 150Mm, Cp Wall Mixer 15 Mm Tely Type, Without Telephonic, Ms Sliding Door Bolt 250Mm, Connection Pipe Pvc Size 15Mm X600 Mm With Coupling, Door Stopper Brass 5In, Gi Nipple 15 X 300 Mm, Bracket Cp For Curtain Rod 19 Mm, Cp Glass Shelve Diplomat 450 Mm, Connection Pipe Pvc Size 15Mm Dia 300Mm Long With 2 Nos Coupling, Connection Pipe Pvc 15Mm X 450Mm With Cp Coupling, Gi Bend 15X150 Mm, Gi Bend 15 Mm Dia, Door Stopper Aluminum Double, Tower Bolt Aluminum 200Mm, Ms Sliding Door Bolt 300Mm, Cp Tee 15Mm, Sliding Door Bolt Aluminum 200Mm, Bow Handle Ms 125Mm, Tower Bolt Aluminum 100Mm, M Seal Small Packet, Curtain Rod Stainless Steel With Brackets 20Mm, Hack Saw Blade Double Edge 300 Mm, Gi Union Socket 15 Mm, Sliding Door Bolt Aluminum 300Mm, Gi Nipple 15 X 75Mm, Gi Socket 15 Mm, Bow Handle Aluminum 150 Mm, White Portland Cement With Plastic Packing Of 1 Kg Wt Each Packet, Gi Bend 15X100 Mm, Bow Handle Aluminum 125 Mm, Gi Nipple 15 X 25Mm, Bracket Ms For Sink Gi 24 In, Gi Bend 20X100 Mm, Gi Red Socket 20 X 15 Mm, Gi Elbow Reducing 32X20 Mm, Gi Tee Equal 15Mm, Hasp And Staple Aluminum 100 Mm, Oil Putty For Fixing Of Window Glass, Gi Union 20 Mm, Hasp And Staple Aluminum 50 Mm, Nails Wire 25Mm, Gi Reducing Elbow 20 X 15 Mm, Gi Union Socket 80 Mm, Gi Socket 50 Mm, Nails Wire 35Mm, Nails Wire 80 Mm, Beeding Pvc Of Size 20 X 6 Mm X 8Ft Long, Gi Bend 80 Mm Dia, Gi Socket Red 25X15 Mm, Nut And Bolt With Washer 6Mmx2in, Beeding Teak Wood 4 Mm Thick X 20 Mm Half Round, Nails Wire 50Mm, Gi Socket Red 25X20 Mm, Gi Tee Redg 50X 15 Mm X 50 Mm, Gi Nipple 20Mm X 100Mm, Back For Chair Cb Steel Without Arms, Ms Screw Wood 15 Mm, Ms Screw Wood 45 Mm, Gi Socket Red 50 X 20 Mm, Gi Nipple 20X50 Mm, Nails Wire 60Mm, Gi Socket 32 Mm, Back For Chair Cb Steel With Arms, Ms Screw Wood 25 Mm, Gi Socket 25 Mm, Ms Screw Wood 75 Mm, Gi Union Socket 25 Mm, Cloth Mal Mal, Locks Pad 100Mm, Ms Screw Wood 20 Mm, Ms Screw Wood 35 Mm, Nails Wire 40Mm, Paint Enamel White In 4 Ltr Pack Container, Locks Pad 50 Mm, Cloth Acrylic For Sofa 48In Wide, Locks Pad 25Mm, Locks Pad 35Mm, Nails Wire 75Mm, Painting Brush 12Mm, Gi Tee 25 Mm, Painting Brush 50Mm, Painting Brush 75 Mm, Painting Brush 25Mm
Manufacture And Supply Of Trestle For Lhb Coaches As Per Drawing No W R/Ml-352/C Manufactured By Msc Class Heavy Duty Erw Pipe Confirms To Is:1239-04 Part 1-2 32Mm Thick Ms Plate Proposed For Top Plate Confirms To Is 2062-11-3 For Rib And Ba Se Plate Ms Plate 10Mm Thick Proposed And Confirms To Is 2062- 11-4 Solid Wooden Blo Ck Size 390X390mm Drawing Attached. Painted Structure Of Trestle Body. As Per Dr Awing No.Wr/Ml 352/C Warranty Period: 30 Months After The Date Of Delivery
Auction Sale Of Ms Scrap As Per Lotdescription Structural Steel, Pipes Lines, Valves
Auction Sale Of Ms Scrap Corrugated Box Andpaper Waste Plastic Pipe Wood Waste
Tender For Pr:28035219 Pipe, Line, 25Mm, Erw, Ms, Class-B Co
Supply Of Hacksaw Blade, Electrode Holder, Welding Earth Clamp, Welding Cable, Welding Transformer Cable Lug, Leather Hand Gloves, Ms Flat, Ms Pipe, M.S Solid Filler Wire For Gmaw, Gas Welding Filler Rods For Oxy-Acetylene, Hot Rolled Carbon Steel Strip Sheet, Hot Molled Carbon Steel Sheet And Strip, Round Ms Rod, Ms Plate, Ms Electrode, Grinding Wheel Pedestral Pferd 61769 Bench Grinding Wheel, Twist Drill Bit Parallel Shank For Drilling Machine
Fabrication Of Tubular Pole 9 Mtrs. Long, By Joining Cutting, Welding In Position And Bracing Welding Etc. As Required 4Inch Dia Ms Pipe To Be Used For Lighting Line At Garjanbahal Ocp, Basundhara Area
Supply of Pipe Ms 8Mm Lancing Q3 Pipe Ms 15Mm Lancing Q3
Replacing B/D 4000Gpm Pump By Another 4000Gpm Pump At Purbasump And Dismantling 10Inch And 8Inch Dia Damaged Ms Pipe From Mine And Transporting To Attendance Room Premises For Fabrication And Making Of Bend, Short Piece And Tapper Pipe Of Ampc.
Design, Fabrication, Supply And Erection Of Exhaust Pipes From Exhaust Blowers Of Various Ovens To Ms Chimneys
Auction Sale Of M.S.Lot- A. M.S.Consisting Ofbumpers, Angles, Silencerpipe, Silencer Mufler, M.S.Cut Pieces, Frontframe, M.S Battery Box, Carriers, Gi Rusted Sheet, M.S. And Gi Sq. And Roundtubes, M.S.Attached Withsteel /Gi, Light M.S.Baleputty, M.S.Attached W/W/Oalu., Gi Pigion Box, Dickeybox Etc Aluminium G.I.Cut Pieces Steel Cut Pieces Seat Cushion Malleable Items Shackles Hanger/ Bracket/ Brokenbrake Drums Etc., Clutch Coverassemblies Ofpressure Plate/ Backplate/ Face Plate/ Coversetc Fly Wheel With Orwithout Ring Fly Wheel Ringonly Slack Adjusterassembly And Its Spares Turbo Charger Crown Piniononly Brake And Brakeparts Engine Aircompressor Fip Timer With Orwithout Gear Wheel Hubsvolvo/Tata/Eicher/Leyland Lot No: Krwb-50 Lotname: Scrap Engine Blockleyland Lot No: Krwb-52 Lotname: Scrap Cam Shaft, Crankshaft Cut Pieces Lot No: Krwb-53 Lotname: Scrap Fuel Injectorpipes Scrap Armature 100 No Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 8, 000.00 Scrap King Pin 1 Mt Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 6, 000.00 Scrap Fax Machine-1, Xerox Machine-2 1 Lot Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 2, 000.00 Scrap Empty Plastic Barrel210/205 Ltr Cap. 20 No Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 1, 200.00 Scrap Valve Guides &Sleeves 1 Mt Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 500.00 Scrap Volvo Gear Box 2 No Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 4, 000.00 Scrap Volvo Crown Assy 5 No Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 2, 000.00 Scrap Engine Block Swarajmazda 28 No Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 20, 000.00 Scrap Cylinder Liners Tata, Leyland, Eicher 2 Mt Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 4, 000.00 Scrap Wheel Disc Tata/Leyland/Volvo 15 No Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 2, 500.00 Scrap Oil Sump Dentedtata, Leyland, Eicher 50 No Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 10, 000.00 Scrap Wheel Hubsvolvo/Tata/Eicher/Leyland 10 No Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 2, 000.00 Scrap Engine Block Leyland 74 No Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 30, 000.00 Scrap Cam Shaft, Crankshaft Cut Pieces 1 Mt Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 3, 000.00 Scrap Fuel Injector Pipes 0.5 Mt Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 1, 500.00 4/25/24, 10:32 Am E-Auctions | Mstc Limited Https://Www.Mstcindia.Co.In/Tenderentry/Lot Item Details Aucid.Aspx?Arid 434838 5/9 Lot No: Krwb-54 Lotname: Scrap M S Turning Pieces& Cast Iron Powder Lot No: Krwb-55 Lotname: Scrap Engine Blockstiffner Plate Lot No: Krwb-410 Lotname: Scrap Engine Blocktata Scrap M S Turning Pieces &Cast Iron Powder 2 Mt Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 6, 000.00 Scrap Engine Block Stiffnerplate 1 Mt Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 3, 000.00 Scrap Engine Block Tata 60 No Asapplicable /18% Ksrtc, Regional Workshop, Kengeri, Bangalore State:Karnataka 70, 000.00 Total No Of Lots 39 Special Terms & Conditions Special Terms &
Supply, Installation, Testing, Commissioning Of C Class Ms Pipe Of Side 150 Mm Dia In Ground With All Fittings Welding, Excavation, Refilling, Providing Concrete Block Supports, Anticorrosive Treatment Tape As Required, Supply, Installation, Testing, Commissioning Single Headed Gunmetal External Yard Hydrant Valve With 1 No. 63 Mm Dia Instantaneous Fm Gunmetal Coupling And Cast Iron Wheel, Isi Marked With Blank Gunmetal Steel Cap And Chain As Required, Etc
Supply Of Ms Materials - 1 1 4 Square Tube 3Mm Thickness Length 6 Meter, 1 Inch Square Tube 3 Mm Thickness Length 6 Meter, Square Tube 2 1 3Mm Thickness Length 6 Meter, Square Tube 1 1 2 1 3Mm Thickness Length 6 Meter, Ms Sheet 8 4 16Swg 1 6Mm Thickness Length 6 Meter, Ms Sheet 8 4 1 2 Mm Thickness 18Swg, Kalloy Sheet 8 4 1 6 Mm Thickness 16Swg, Self Lock 1 Inch Screw, Self Lock 3 4 Inch Screw, Pop Revit 1 Inch, Pop Revit 3 4 Inch, 20Mm Plain Ms Rod, L Angle 1 1 2 1 1 2 6Mm Thickness Length 6 Meter, L Angle 1 1 2 1 1 2 5Mm Thickness Length 6 Meter, 1 Inch L Angle 1 1 3Mm Thickness Length 6 Meter, 1 Inch Flat 5Mm Thickness Length 6 Meter, 1 1 2 Inch Flat 3Mm Thickness Length 6 Meter, 2 Inch Flat 10Mm Thickness Length 6 Meter, 1 Inch Round Pipe 3Mm Thickness Length 6 Meter, C Channel 75Mm 38Mm 6Mm Thickness Length 6 Meter, C Channel 100Mm 50 8 Mm 6Mm Thickness Length 6 Meter
Dismantling And Transportation Of 3Nos. 7Tr Hpac Units With Placing At Sw Rooms As Reqd., Itc Of Shifted 7Tr Hpac Units, Laying Of Existing Cu Refrigerant Pipe 7 By 8 Th And 5 By 8 Th Inch Dia, Laying Of Existing Ms Cable Tray Of All Sizes, Supplying And Laying Of Cu Refrigerant Pipe 7 By 8 Th Inch Dia, Supplying And Laying Of Cu Refrigerant Pipe 5 By 8 Th Inch Dia, Supplying And Laying Of 4 Core 10 Sq Mm Aluminium Conductor Armoured Cable, Supplying And Laying Of 3 Core 4 Sq Mm Aluminium Conductor Armoured Cable, End Termination For 4 Core 10 Sq Mm Cable, End Termination For 3 Core 4 Sq Mm Cable, Providing And Fixing 0.80 Mm Or 22 Guage Thickness Gi Sheet Ducting, Fixing Of Existing 4Way Vertical Type Tpn Mcb Db, Providing And Fixing Of 6 Swg Dia. Gi Wire, Supplying And Charging Of R407 Refrigerant Gas For Top Up, Supplying And Fixing Of 40 Mm Dia Upvc Pipe, Supplying And Fabrication Of M.S. Frame Made Out Of Various M.S. Sections Incl. Hardwares Finishing, Painting, Minor Civil Work Etc, Laying Of Power Cable Upto 35 Sqmm Size Clamped With 1Mm Thick Saddle
tender for Pipeline Modification Valve Installation, Structural Work And Allied Civil Mechanical Works For Conversion Of Tank No 24 To Ms Service From Hsd Service
Supply of Fire Hydrant System, 136 Ms Pipe 100 Mm Fire Pump Butterfly Fire Hose Pipe Fire Hydrant Valve Fire Hose Box Short Branch Pipe Fire Hose Reel Two Way Ms Pipe 80 Mm
Supply of Set Of Ms Reservoir With Drain Cock Of Different Size And Incoming -Outg Oing Port Consists Of: 1 Reservoir 1 Ltr, 1/2 Inch Incoming & Outgoing Pipe With 3/4In Ch Drain Cock, Qty-04Nos 2 Reservoir 3 Ltr, 1/2 Inch Incoming & Outgoing Pipe With 3/4I Nch Drain Cock, Qty-05Nos, 3 Reservoir 5 Ltr, 1/2 Inch Incoming & Outgoing Pipe With 3/ 4Inch Drain Cock, Qty-01Nos, 4 Reservoir 6 Ltr, 1/2 Inch Incoming & Outgoing Pipe With 3/4Inch Drain Cock, Qty-03Nos, 5 Reservoir 14 Ltr, 1 Inch Incoming & 3/4Inch Outgoing P Ipe With 3/4Inch Drain Cock, Qty-04Nos, 6 Reservoir 18 Ltr, 3/4 Inch Incoming & 1/2 Inch O Utgoing Pipe With 3/4Inch Drain Cock, Qty-01Nos, 7 Reservoir 20 Ltr, 5/4 Inch Incoming & 3/4Inch Outgoing Pipe With 3/4Inch Drain Cock, Qty-01Nos, 8 Reservoir 35 Ltr, 3/4 Inch Incoming & 1/2Inch Outgoing Pipe With 3/4Inch Drain Cock, Qty-02Nos, 9 Reservoir 100 L Tr, 3/4 Inch Incoming & 3/4 Inch Outgoing Pipe With 3/4Inch Drain Cock, Qty-01Nos. Warran Ty Period: 30 Months After The Date Of Delivery
Supply of Set Of Items For Pressurized Flushing System. Fitting Below 8Mm Tube, Bsp 1/4 Designed For Pressurised Flushing System As Per Mdts 19027. Rev.01. Item Code Spac.0011034 Or Equivalent Make Functionally Com Patible In Pressurised Flushing System Of Indian Railway Coaches Fitted With Pressu Rized Flushing System Of Spac Make. Warranty Period: 30 Months After The Date Of Delivery Piston Rod Air Lock Seal, Make/Model: Sam Ruthi Industries Part No.: Sri/1066 Or A K Traders P Art No.: Akt/Prsr/02 Or Augus Mechanical Engg. Part No.: Amr/2009. Warranty Period: 30 Months After The Date Of Delivery Flange Cap, Make/Model: Sam Ruthi Industries Part No.: Sri/1011 Or A K Traders Part No.: Akt/ Prsr/05 Or Augus Mechanical Engg. Part No.: Amr/2010. Warranty Period: 30 Months After The Date Of Deliv Ery Muffler 1/4 Designed For Pressurised Flushing System As Per Mdts 19027. Rev.01. Make: Spac Item Code Spac.0009376 Or Equivalent Make Functionally Compatible In Pressurised Flushing System Of Indian Railway Coaches Fitted With Pressurized Fl Ushing System Of Spac Make. Warranty Period: 30 Months After The Date Of Delivery Fitting Equal Tee 8Mm Tube, Designed For Pressurised Flushing System As Per Mdts 19027. Rev.01. Make: Spac Item Code Spac.0011017 Or Equivalent Make Function Ally Compatible In Pressurised Flushing System Of Indian Railway Coaches Fitted Wit H Pressurized Flushing System Of Spac Make. Warranty Period: 30 Months After The Date Of Deliv Ery Thermoplastic Hose Pipe 3/4 Is-12585-88 Type-2 For Water Line Designed For Pressurised Flushing System As Per Mdts 19027. Rev.01. Make: Spac Item Code Rm.000056 4 Or Equivalent Make Functionally Compatible In Pressurised Flushing System Of Ind Ian Railway Coaches Fitted With Pressurized Flushing System Of Spac Make. Warranty Period: 30 Months After The Date Of Delivery Nylon Tube Designed For Pressurised Flushing System As Per Mdts 19027. R Ev.01.Make: Spac Item Code Spac.0010035 Or Equivalent Make Functionally Compatible I N Pressurised Flushing System Of Indian Railway Coaches Fitted With Pressurized Fl Ushing System Of Spac Make. Warranty Period: 30 Months After The Date Of Delivery Supply Of Ss 904 Honing Cylinder Water Side For Pressurised Flushing System. Make Imi / Shree P Rayag Air Control Private Ltd / Sam Ruthi / Air Flow / Genetics Or Any Other Latest Railway Approved Mak E For The Item. Note - 1 Material Should Be Procured From Oem / Oem Authorised Dealer. Oem Authorization Certificate Should Be Submitted At The Time Of Biding. 2 Fit For Purpose Certificate Should Be Submitted At The Time Of Delivery. Warranty Period: 30 Months After The Date Of Delivery Supply Of Y Valve 3/4 Water Locking For Pressurised Flushing System. Make Imi / Shree Prayag Ai R Control Private Ltd / Sam Ruthi / Air Flow / Genetics Or Any Other Latest Railway Approved Make For The I Tem. Note - 1 Material Should Be Procured From Oem / Oem Authorised Dealer. Oem Authorization Certificate Should Be Submitted At The Time Of Biding. 2 Fit For Purpose Certificate Should Be Submitted At The Time Of Delivery . Warranty Period: 30 Months After The Date Of Delivery Flange To Is: 733 - 1983, Make/Model: Sam Ruthi Industries Part No. Sri/1017 Or A K Traders Part No. Akt/Prsr/17 Or Augus Mechanical Engg. Part No. Amr/2020. Warranty Period: 30 Months After The Dat E Of Delivery Supply Of Piston Rod Chrome Plate With Suitable Thread For Piston, For Pressurized Flushing System. Make - Imi / Shree Prayag Air Control Private Ltd / Sam Ruthi / Air Flow / Genetics Or Any Other Latest Rai Lway Approved Make For The Item Warranty Period: 30 Months After The Date Of Delivery Air Filter And Regulator, Preset To 3 Bar Output With G 1/4 Inch X Od 8 Mm Swivel Elbow Adaptor At In Put And G 1/4 Inch X Od 8 Mm Swivel Elbow Adaptor For Pressurized Output Flushing System.As Per Mdts 19027 Warranty Period: 30 Months After The Date Of Delivery 5/2 Push Pull Spring Return Valve - 1/4 With Mounting Brackets, Knob, Conn Ectors, Fasterners Designed For Pressurised Flushing System Make: Spac, Or Equi Valent Make Functionally Compatible In Pressurised Flushing System Of Indian Railw Ay Coaches Fitted With Pressurized Flushing System Of Spac Make. Warranty Period: 30 Months After The Date Of Delivery Nozzle 3/4 X3/4 As Per Mdts 19027. Rev.01. Make: Spac Item Code Con.0000617 O R Equivalent Make Functionally Compatible In Pressurised Flushing System Of Indian Railway Coaches Fitted With Pressurized Flushing System Of Spac Make Warranty Peri Od: 30 Months After The Date Of Delivery Supply Of Set Of Modified Water Pressurized Flushing System Cylinder Piston Ring Consisting Of Th Ree Items As - Item No. 1 - Ring, 99 Mm Od X 34 Mm Thick X 16 Mm Id, Qty. 01 No., Item No. 2 - Ksg.25 Seal, Qty. 02 Nos. & Item No. 3 - Pressing Belt L-311.14Mm, W -15Mm, Thickness - 2 Mm. Qty. - 01 No. As Per Attac Hed Annexure -1. Sample Should Be Approved By Consignee Before Supply. Make - Sam Ruthi Or A.K.T. Or Augu S Or Similar Reputed Make. Accepted Make/Brand- Sam Ruthi. Warranty Period: 30 Months After The Date Of Delivery Supply Set Of Items For Pressurized Flushing System, Consisting Of I Cylinder Assemble Rod Ms C Onsisting 16 Nos. Per Set. Ii Bracket With Bolt Nut And Washer Consisting 08 Nos. Per Set. Make Imi / Shree Pray Ag Air Control Private Ltd / Sam Ruthi / Air Flow / Genetics Or Any Other Latest Railway Approved Make Fo R The Item. One Set Consist Of Two Items 16 Nos.+8 Nos. 24 Nos. Note:- 1 Material Should Be Procured Fro M Oem / Oem Authorised Dealer. Oem Authorization Certificate Should Be Submitted At The Time Of Biding. 2 Fit For Purpose Certificate Should Be Submitted At The Time Of Delivery. Warranty Period: 30 Months After The Date Of Delivery
Work Of Removal Of Existing Ms/Cs Pipe & Fittings And Fabrication, Erection, Testing & Commissioning Of New Ss 316L Pipe And Fittings Of Various Size In Unit # 3 & # 4 At Stps On As And When Required Basis.
