Supply of Set Of Luggage Rack Modules For Lhb Non Ac Chair Car Coaches, As Per Dra Wing: Mpllrmlwscz Version 2, Packing Instruction: 1. Top Fixing Profile:- Item Should Be Wra Pped In Brown Paper Individually And Packed In Wooden Box. 2. Luggage Rack Assy.:- It Em Should Be Wrapped In Brown Paper Individually And Packed In Wooden Box. 3. Read Ing Lamp: - Each Fitting Is Be Wrapped With Biodegradable Bubble Sheet And Packed In Card Board Boxessingle Ply Corrugated. Finally Up To 24 Lights To Be Packed In Car D Board Box Double Ply Corrugated And Tied With 3 Packing Strip Horizontally And 3 Vertically. Note: I Item No. 1, 2 & 3 Should Be Packed In Separate Boxes. Ii A List Sho Uld Be Pasted On Each Box Showing Order No., Pl No., Description Of Item Drg. No./Sp Ec. No., Qty., Firms Name, Address & Date Of Despatch Etc. Warranty Period: 30 Months After The Date Of Delivery Luggage Rack Modules Without Lights For Lhb 2Nd Ac Chair Car Coaches., As Per Drawing: Lz62100 Item 1 To 6 & 27, Packing Instruction: 1. Top Fixing Profile:- Item Should Be Wrapped In Brown Paper Individually And Packed In Wooden Box. 2. Luggage Rack A Ssy.:- Item Should Be Wrapped In Brown Paper Individually And Packed In Wooden Box. 3. Reading Lamp: - Each Fitting Is Be Wrapped With Biodegradable Bubble Sheet And Pa Cked In Card Board Boxessingle Ply Corrugated. Finally Up To 24 Lights To Be Packe D In Card Board Box Double Ply Corrugated And Tied With 3 Packing Strip Horizonta Lly And 3 Vertically. Note: I Item No. 1, 2 & 3 Should Be Packed In Separate Boxes. Ii A L Ist Should Be Pasted On Each Box Showing Order No., Pl No., Description Of Item Drg . No./Spec. No., Qty., Firms Name, Address & Date Of Despatch Etc. Warranty Period: 30 Mo Nths After The Date Of Delivery
Supply Of Automatic Fire Detection Cum Suppression System For Lhb Power Car And Pantry Car Coaches, Installation & Commissioning Inclusive As Per Drawing: Rdso Spec.R Dso/2013/Cg-06 Rev.02 With Amendment Slip No. 1 Of February-2020, Packing Instruction: As Pe R Standard Packing. It Should Be Ensured That Item Should Not Rub During Transpo Rtation. The Item Should Be Packed With Adequate Strength. Transit Damage, If Any, Shall Be At The Cost Of Supplier. Warranty Period: 48 Months After The Date Of Delivery
Supply of 16 Sq.Mm Thin Walled Flex.Elast.Cablechocwith Cu Cond, Up To 750V., As Per Drawing/Specifsication: Elrs/Spec/Elc/0019, Rev-4. As Per Rdso Letter No.El/2.2.37 Dt.23/03/2009, P Acking Instruction: Packing As Per Drawing/Specification, Proction Procedure: 1 Warranty Period: 30 Months After The Date Of Delivery 16 Sq.Mm Thin Walled Flex.Elast.Cablewhite, With Cu.Cond, Up To 750V., As Per Drawing/Specification: Elrs/Spec/Elc/0019, Rev-4. As Per Rdso Letter No.El/2.2.37 Dt.23/03/2009, P Acking Instruction: Packing As Per Drawing/Specification Warranty Period: 30 Months After The Dat E Of Delivery 16 Sq.Mm Thin Walled Flex.Elast.Cableyellow, With Cu.Cond, Up To 750V., As P Er Drawing/Specification: Elrs/Spec/Elc/0019, Rev-4. As Per Rdso Letter No.El/2.2.37 Dt.23/03/2009, Packing Instruction: Packing As Per Drawing/Specification Warranty Period: 30 Months After The Date Of Delivery 16 Sq. Mm Blue Thin Walled Flex. Elast. Cable With Cu. Cond, Up To 750V., As P Er Drawing/Specification: Elrs/Spec/Elc/0019, Rev-4. As Per Rdso Letter No.El/2.2.37 Dt.23/03/2009, Packing Instruction: Packing As Per Drawing/Specification Warranty Period: 30 Months After The Date Of Delivery 16 Sq.Mm Thin Walled Flex.Elast.Cablered, With Cu.Cond, Up To 750V., As Per Dr Awing/Specification: Elrs/Spec/Elc/0019, Rev-4. As Per Rdso Letter No.El/2.2.37 Dt.23/03/2009, Pac King Instruction: Packing As Per Drawing/Specification Warranty Period: 30 Months After The Date Of Delivery 16 Sq.Mm Thin Walled Flex.Elast.Cablered, With Cu.Cond, 750V To 1.8/3.0 Kv., As Per Drawing/Specification: Elrs/Spec/Elc/0019, Rev-4. As Per Rdso Letter No.El/2.2.37 Dt.23/03/200 9, Packing Instruction: Packing As Per Drawing/Specification Warranty Period: 30 Months After The Date Of Delivery 16 Sq.Mm Thin Walled Flex.Elast.Cableblue, With Cu. Cond, 750V To 1.8/3.0 Kv., As Per Drawing/Specification: Elrs/Spec/Elc/0019, Rev-4. As Per Rdso Letter No.El/2.2.37 Dt.23/03/ 2009, Packing Instruction: Packing As Per Drawing/Specification Warranty Period: 30 Months After The Date Of Delivery 16 Sq.Mm Thin Walled Flex.Elast.Cableblack, With Cu.Cond, 750V To 1.8/3.0 Kv., As Per Drawing/Specification: Elrs/Spec/Elc/0019, Rev-4. As Per Rdso Letter No.El/2.2.37 Dt.23/03/ 2009, Packing Instruction: Packing As Per Drawing/Specification Warranty Period: 30 Months After The Date Of Delivery 16 Sq.Mm Thin Walled Flex. Elast.Cableblack, With Cu.Cond, Up To 750V., As Per Drawing/Specification: Elrs/Spec/Elc/0019, Rev-4 As Per Rdso Letter No.El/2.2.37 Dt.23/03/2009, P Acking Instruction: Packing As Per Drawing/Specification Warranty Period: 30 Months After The Dat E Of Delivery 16 Sq.Mm Thin Walled Flex.Elast.Cablegreen/Yellow, With Cu.Cond, Up To 75 0V., As Per Drawing/Specification: Elrs/Spec/Elc/0019, Rev-4. As Per Rdso Letter No.El/2.2.37 Dt.2 3/03/2009, Packing Instruction: Packing As Per Drawing/Specification Warranty Period: 30 Months After The Date Of Delivery 16 Sq.Mm Thin Walled Flex.Elast.Cableyellow, With Cu.Cond, 750V To 1.8/3.0 K V., As Per Drawing/Specification: Elrs/Spec/Elc/0019, Rev-4. As Per Rdso Letter No.El/2.2.37 Dt.23/ 03/2009, Packing Instruction: Packing As Per Drawing/Specification Warranty Period: 30 Months A Fter The Date Of Delivery
Supply of Nylon Tyre Front For Jcb Ditch Machine, As Per Drawing: Is : 1014 - 1991, 9.00-16, 16 Ply Rating, Make- Ceat, Mrf, Modi, Jk Only Warranty Period: 30 Months After The Date Of Delivery
Supply of High Pressure Hose Pipe Inner Dia 6.4Mm L 15 Mtrs, Fbe Type, 1/4 Nspm, Weight Approx2 Kg, High Safety Standard, Chemical Resistance,, Working Pressure 3300 Psi 2 27Bar, Withmanufacturer Test Certificate, Hose Pipe Brand, Manufacturer Name & Pr Essure Shall Havemarked On Outer Dia Of Pipe Warranty Period: 30 Months After The Date Of Del Ivery
Supply of Water Filling Connector With Clamp, As Per Drawing: Mi006153 Alt B And Mdts-20 3 Revision 06, Packing Instruction: As Per Standard Packing. It Should Be Ensured That Item Should Not Rub During Transportation. The Item Should Be Packed With Adequate St Rength. Transit Damage, If Any, Shall Be At The Cost Of Supplier. Warranty Period: 30 M Onths After The Date Of Delivery
Supply of Floor End Profile For Lhb Coaches, L 2M., As Per Drawing: Ls41128, Packing Instruct Ion: As Per Standard Packing. It Should Be Ensured That Item Should Not Rub During T Ransportation. The Item Should Be Packed With Adequate Strength. Transit Damage, If Any, Shall Be At The Cost Of Supplier. Warranty Period: 30 Months After The Date Of Delivery
Supply of Rosuvastatin 40 Mg Oral Tablet
Supply of Link Pin-Qr Code As Per Cde/Rcf Letter No. Md44121 Dt. 24.11.2021., As Per Drawing: Lw 05125 Alt. B, Packing Instruction: Suitably Packed In Jute Bags Warranty Period: 30 Months After Th E Date Of Delivery
Supply of Integerated Wtcc., As Per Drawing: Lg10344 Alt.A, Packing Instruction: 1. The Supplie R Shall Pack The Integrated Wtcc In A Suitably Designed Returnable Fixture In Such A Way That Integrated Wtcc Shall Not Get Scratched, Damaged, Twisted During Tran Sportation, Storage And Lifting And To Avoid Scratches On Outer Surface. It Shoul D Be Wrapped With Enviroment Friendly Material And It Should Have Standard Clampi Ng /Fastening Mechanism So That It Can Be Opened Easily. It Should Have Firms Identif Ication Mark. 2. First Returanable Fixture Along With Integrated Wtcc Be Retained B Y Rcf & This Fixture Shall Be Exchanged In The Second Lot Supply And So On. At The En D Of The Contact, The Firm Shall Collect The Remaining Returnable Packing Fixture F Rom Rcf. 3. The Packing Fixture/Frame To Be Fabricated Having Sufficient Strenght T O Bear Approximate 1 Tonne Load In Static & Moving Condition Of Two Coach Set Of In Tegrated Wtcc. 4. The Fixture /Frame/Pallet Should Be Designed So That The Packed Wtcc Remain Preferably In Horizontal Position To Minimize Surface Area. 5. It Should Also Be Suitable For Storage Of Integrated Wtcc Under Open Sky. Warranty Period: 30 Months After The Date Of Delivery
Supply of Cnc Controlled Dynamic Wheel Balancing Machine With Correction Machine I.E Milling Machine Combined With Dynamic Balance Machine For Vande Bharat Coaches As Per Spec No.Mech/Umbrella Project/4 41 Rev. Nil. Warranty Period: 30 Months After The Date Of Delivery Cost Of Comprehensive Amc Charges For 10 Years After Completion Of Warranty Period. Line Item F Or Amc Of Each Year As Per Clause No.17 Of Spec No.Mech/Umbrella Project/441 Rev.- Nil. The Cost Of Basic Machine To Meeting The Requirement Of Technical Specification As Per Spec No.Me Ch/Umbrella Project/441 Rev. Nil. The Cost Of Concomitant Accessories According To As Per Clause No.3.0 3.1 To 3.12 Of Spec No.Me Ch/Umbrella Project/441 Rev. Nil. Cost Of Other Accessories, Which In The Opinion Of The Supplier, Are Essential To Make The Machine F Ully Functional As Per Clause No.5.0 Iii Of Spec No. Mech/Umbrella Project/441 Rev. Nil. Cost Of Turnkey Charges Viz., Foundation, Installation, Commissioning, Training Etc. Cost Of Preventive Maintenance For The Warranty Period Two Years As Per Clause No.5.0 V Of Sp Ec No. Mech/Umbrella Project/441 Rev. Nil.
Supply of Accessories Of Roof Water Tank 30L To Drg No. Lw63150 Alt E W/O Item No. 1 Follow Packing Instruction No.Pi 172 Version 4 Warranty Period: 30 Months After The Date Of D Elivery
Supply of Ambroxol 15 Mg + Dextromethorphan 5 Mg + Phenylephrine 5 Mg + Cpm 2Mg/ 5Ml 100 Ml Bottle
Supply of Mild Steel Round Dia 63Mm, As Per Drawing: Is:2062-1992 Fe410 Wc, Quality Plan: N.A. Warranty Period: 30 Months After The Date Of Delivery
Supply Of Set Of Air Grill For Lhb Power Car Coaches., As Per Drawing: Mplagllrrmus Ve Rsion 0, Packing Instruction: Brown Papper Wrapping For Individual Item Collectively Pac Ked In Wooden Boxes Warranty Period: 30 Months After The Date Of Delivery
Supply of Dsx 80Disoldering Iron Part No T0051319099 Make Weller Warranty Period: 30 M Onths After The Date Of Delivery Desoldering Head Dsx80, Part No. T0051313099, Make Weller. Warranty Period: 3 0 Months After The Date Of Delivery Cleaning Tool Compl., Part No. T0051350099, Make Weller. Warranty Period: 30 Months After The Date Of Delivery Wsp 80 Soldering Iron Antistat, Part No. T0052916199, Make Weller Warranty P Eriod: 30 Months After The Date Of Delivery Dx114 Desoldering Tip Part No. T0051314499, Make Weller. Warranty Period: 30 M Onths After The Date Of Delivery Heating Element F.Wsp80, Part No. T0058744711 Make Weller. Warranty Period: 3 0 Months After The Date Of Delivery
Supply of Set Of Ss Chequred Sheet 1.7Mm Thick. For Flooring Of Lhb Parcel Van Co Aches., As Per Drawing: Mi007604 Alt Nil Without Item 12, 17, 18 & 20, Packing Instruction: As Per Sta Ndard Packing. It Should Be Ensured That Item Should Not Rub During Transportati On. The Item Should Be Packed With Adequate Strength. Transit Damage, If Any, Shal L Be At The Cost Of Supplier. Warranty Period: 30 Months After The Date Of Delivery
Supply of Set Of Wooden Clamps For Lhb Vp Parcel Van High Capacity Coach, As Per Dra Wing/Specification : Mp18wclvp Version 1. Warranty Period: 30 Months After The Date Of Delivery
Supply of Ceramic Part For Laser Profile Cutting Machine Trumpf, As Per Drawing: Par T No. 0260432 Of M/S Trumpf Or Part No. Al 108 Of M/S Infrared Warranty Period: 30 Months Af Ter The Date Of Delivery
Supply of High Tensile Tightlock Cbc With Aar H Type Head And Balanced Draft Gear. All Items Are To Be Packed In One Single Packing, As Per Drawing: Rdsos Specification N O. Rdso/2011/Cg-03 Rev. 3 Without Crash Element., Packing Instruction: Lhb Cbcs Are Being Used In T Wo Stages In Rcf And As Per Shop Using Practice, It Is Proposed That Lhb/Cbcs To B E Packed In Two Wooden Boxes As Per Packing Instruction Here Under :- 1.Packing -I:- Un-Coupling Device With Hardwares And Other Related Acessories. All Related Hard Wares To Be Packed Separately In Jute Packing To Avoid Rusting/Corrosion Of Hard Wares . Pl No To Be Printed/Marked On Packing Slip And For Use Of Fur Group To Be Marked On Box . 2.Packing -Ii:- One Coupler Head, One Draft Gear With Hardwares And Other Related Acessories. All Related Hardwares To Be Packed Separately In Jute P Acking To Avoid Rusting/Corrosion Of Hardwares .Machined Surfaces Must Be Cove Red With Corrosion Resistant Paint/Substance. Pl No To Be Printed/Marked On Packin G Slip And For Use Of Underframe Group To Be Marked On Box . Note: I Item No. I, Ii S Hould Be Packed In Separate Boxes. Ii A List Should Be Pasted On Each Box Showing Order No., Pl No., Description Of Item Drg. No./Spec. No., Qty., Firms Name, Address, U Ser Name As Above & Date Of Despatch Etc., Proction Procedure: N.A, Quality Plan: N.A Warranty Period: 84 Months After The Date Of Delivery