Supply Of Ci Cs Casted Items -C.I. Idler For Cane Carrier I As Per Drawing No. Ksc/Cc1/4/17, , C.I. Pulley As Per Drawing With Machining, C.I. Coupling Different Size As Per Drawing, C.I. Casting Various Size Gulla As Per Drawing With Rough Machining. Different Size, , Cast Steel Spur Gear & Pinion New Basis, Cast Steel & Spur Gear- 72 Teeth, Face Width- 75Mm, Bore- 50Mm Od- 473 Mm, Module- 6.4. Approx Weight 90 Kg, , Cast Steel & Spur Gear- 26 Teeth, Face Width- 75Mm, Bore- 45Mm Od- 178.24 Mm, Module- 6.4- Approx Weight 11.6 Kg, , Cast Steel Pinion- 24 Teeth, Face Width- 70Mm, Bore- 45Mm Od- 166.4 Mm, Module- 6.4 -Approx Weight 9.7 Kg, , Cast Steel Pinion- 34 Teeth, Face Width- 75Mm, Bore- 40Mm Od- 308 Mm, Module- 8.56. Approx Weight 20 Kg, , Cast Steel Gear Pinion- 50 Teeth, As Per Drg No. Mills-138Approx Weight 11 Kg, , Cast Steel Sprocket- 13 Teeth 6” Pitch, As Per Drg. Mills-27, , Cast Steel Pinion- 18 Teeth, Face Width- 75Mm, Bore- 45Mm Od- 128 Mm, Module- 6.4.Approx Weight 5 Kg, , C.S.Scaper For Mills Duly Machined As Per Sample Drg.No Ksc/Mh/91618 Approx Wt-190Kg Each, Cast Steel Trash Plate Lenth 1680 Mm Made Of Is 2708 Grade Iii Duly Rough Machined As Per Drg.No – Ksc/Mh/285/22, C.S. Wheel For Cane Unloader Bridge As Per Drg.No. Ksc/Unloader/2/17.Approx Wt 185 Kg., C.S Gear 68 Teeth, Module-6.14, Face Width-65Mm, O.D--430Mm, Drg No.-Ksc/Unloder/17, C.S.Wheel For Cane Unloder Trolly Drg No.-Ksc/Cr/145 Approx.Wight-55Kg, C.S.Pinion-18Teeth, Module-6.14, F.W-65 Od-122.8 Drg. No.-Ksc/Unloder/17, C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc/M/1565 Tail End Material 2708, C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc/M/1564 Driving Shaft Material 2708, C.S.Sproket-36 Teeth For Duplex Chain 2 1/2 Pitch Material 2708 Drg No Ksc/Boiler-163, C.S. Sprocket 17 Teeth For Duplex Chain 2 1/2 Pitch Material 2708 Drg No-Ksc/Mill/4887, Opertuinity Device Of Trash Turner Beam Material-Ss Drg No. Mills-8488, C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-10, Fw-110Mm Od-260Mm Bore-50Mm, C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-8, Fw-120Mm Od-208 Mm Bore-50Mm, C.S.Worm Shaft As Per Sample For Mill, C.S. Mill Coupling Weight 700Kg Approx As Per Drawing, C.S. Mill Crown Pinion 16 Teeth Weight 1500 Kg. As Per Drawing, Cast Steel Spur Gear & Pinion On Conversion Basis, Cast Steel & Spur Gear- 72 Teeth, Face Width- 75Mm, Bore- 50Mm Od- 473 Mm, Module- 6.4. Approx Weight 90 Kg, , Cast Steel & Spur Gear- 26 Teeth, Face Width- 75Mm, Bore- 45Mm Od- 178.24 Mm, Module- 6.4- Approx Weight 11.6 Kg, , Cast Steel Pinion- 24 Teeth, Face Width- 70Mm, Bore- 45Mm Od- 166.4 Mm, Module- 6.4 -Approx Weight 9.7 Kg, , Cast Steel Pinion- 34 Teeth, Face Width- 75Mm, Bore- 40Mm Od- 308 Mm, Module- 8.56. Approx Weight 20 Kg, , Cast Steel Gear Pinion- 50 Teeth, As Per Drg No. Mills-138Approx Weight 11 Kg, , Cast Steel Sprocket- 13 Teeth 6” Pitch, As Per Drg. Mills-27, , Cast Steel Pinion- 18 Teeth, Face Width- 75Mm, Bore- 45Mm Od- 128 Mm, Module- 6.4.Approx Weight 5 Kg, , C.S.Scaper For Mills Duly Machined As Per Sample Drg.No Ksc/Mh/91618 Approx Wt-190Kg Each, Cast Steel Trash Plate Lenth 1680 Mm Made Of Is 2708 Grade Iii Duly Rough Machined As Per Drg.No – Ksc/Mh/285/22, C.S. Wheel For Cane Unloader Bridge As Per Drg.No. Ksc/Unloader/2/17.Approx Wt 185 Kg., C.S Gear 68 Teeth, Module-6.14, Face Width-65Mm, O.D--430Mm, Drg No.-Ksc/Unloder/17, C.S.Wheel For Cane Unloder Trolly Drg No.-Ksc/Cr/145 Approx.Wight-55Kg, C.S.Pinion-18Teeth, Module-6.14, F.W-65 Od-122.8 Drg. No.-Ksc/Unloder/17, C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc/M/1565 Tail End Material 2708, C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc/M/1564 Driving Shaft Material 2708, C.S.Sproket-36 Teeth For Duplex Chain 2 1/2 Pitch Material 2708 Drg No Ksc/Boiler-163, C.S. Sprocket 17 Teeth For Duplex Chain 2 1/2 Pitch Material 2708 Drg No-Ksc/Mill/4887, Opertuinity Device Of Trash Turner Beam Material-Ss Drg No. Mills-8488, C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-10, Fw-110Mm Od-260Mm Bore-50Mm, C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-8, Fw-120Mm Od- 208 Mm Bore-50Mm, C.S.Worm Shaft As Per Sample For Mill, C.S. Mill Coupling Weight 700Kg Approx, C.S. Mill Crown Pinion 16 Teeth Weight 1500 Kg.
Supply Of King Pin Upper, Assy Link Rod, Assy Sealing Mould Rh Outer, Assy Pipe, Assy Hose, Assy Cable Complete , Convoy Lamp, Change Over Switch, Tensioner Belt, Crown Wheel & Pinion 41/7 Ratio
Supply of 396 LV7/T-815 443-319-700-000 TRIPPER 24 V,LV7/TMB 2654-4310-0111 BRAKE FLUID CONTAINER ASSY,LV7/TMB 2610-8240-0102 ASSY BLADE WIPPER,LV7/TMB 2786-0798-9916 ELEMENT FUEL WATER SEPRATOR,LV7/TATA 2604-3530-0106 CROWN WHEEL & TAIL PINION(41/71 OR LIBO)
