Polyethylene Tank Tenders

Gem Bids For Rotational Moulded Polyethylene Water Storage Tanks V2conforming To Is 12701 Q3, Bathroom Water Shower V2q3

Gem Bids For Copper Alloy Taps/stop Valves V2 Conforming To Is 8931q3, Rotational Moulded Polyethylene Water Storage Tanksv2 Conforming To Is 12701 Q3, Bathroom Water Showerv2 Q3, Soap Dish - Case Q4, Water Fittings - Copperalloy Float Valves Horizontal Plunger Type As Per Is: 1703q4

Gem Bids For Led Batten Q2, Hydraulically Regulated Doorclosers Q3, Self Ballasted Led Lamps For Generallighting Services V2 Conforming To Is 16102 Q2, Waterfittings - Copper Alloy Float Valves Horizontal Plunger Typeas Per Is: 1703 Q4, Rotational Moulded Polyethylenewater Storage Tanks V2 Conforming To Is 12701 Q3

Gem Bids For Bathroom Water Shower V2 Q3, Water Fittings - Copperalloy Float Valves Horizontal Plunger Type As Per Is: 1703q4, Bathroom Or Toilet Mirror V2 Q4, Copper Alloygate Valve For Waterworks Purpose As Per Is 778 Q3, Connection Pipe With Nuts V2 Q3, Floor Drain Traps Q3, Rotational Moulded Polyethylene Water Storage Tanks V2conforming To Is 12701 Q3, Soap Dish - Case Q4, Wastefittings For Washbasin And Sinks As Per Is 2963 Q3, Wastepipe Q3, Plastics Bib Taps Pillar Taps Angle Valves Andstop Valves As Per Is 9763:2000 Latest Q3

Gem Bids For Rotational Moulded Polyethylene Water Storage Tanks (v2) Conforming To Is 12701 (q3)

Gem Bids For Led Luminaire Recessed Luminaire V3 Conforming To Is10322 Part 5/section 2 Q3, Rotational Mouldedpolyethylene Water Storage Tanks V2 Conforming To Is12701 Q3, Led Garden Light V2 Q2, Led Luminaire Forfloodlight V2 Conforming To Is 10322 Part 5/section 5q3, Water Fittings - Copper Alloy Float Valves Horizontalplunger Type As Per Is: 1703 Q4, Health Faucet Q3, Fixed Capacitors Fixed Capacitor For Single Phase Acelectric Fan As Per Is 1709:1984 Q3 . . % % 4 4   /mse Exemption For Years Ofexperience And Turnoverno& % & % . . % % 4 4   /startup Exemption For Years Ofexperience And Turnoverno
5
5 & & /document Requiredfrom Sellerexperience Criteria, Past Performance, Bidderturnover, Certificate Requested In Atc, Oem Authorizationcertificate, Oem Annual Turnover, Additional Doc 1requested In Atc, Additional Doc 2 Requested In Atc*in Case Any Bidder Is Seeking Exemption From Experience /turnover Criteria, The Supporting Documents To Prove Hiseligibility For Exemption Must Be Uploaded For Evaluation Bythe Buyer7 7
9
9 : : ; ; & 9 & 9

< <
9
9 ; ; > >? ? % % /do You Want To Showdocuments Uploaded By Bidders To Allbidders Participated In Bid?no
@ /bid Number: Gem/2025/b/6609604; /dated: 26-08-2025

& & / Bid Document1 / 33

  -- I I J J
5
5   @ @ / Minimum Number Ofbids Required To Disable Automatic Bidextension2; 9; 9   @ @, , M M

  -- / / Number Of Days For Which Bidwould Be Auto--extended7

4 % 4 % /past Performance80 %

O %o % ;5 ;5 ; ; /bid To Ra Enabledyeso %o % P P /ra Quali Cation Rule50% Lowest Priced Technically Qualified Bidders

4 4 /type Of Bidtwo Packet Bid4 4 S S /primary Product Categoryrotational Moulded Polyethylene Water Storage Tanks V2conforming To Is 12701   T T   & V & V /time Allowed For Technicalclarifications During Technical Evaluation2 Days w w I I X X w w 4 4 / % % < 9 < 9 : : /inspection Required Byempanelled Inspection Authority / Agenciespre-registered With Gemno T T X X /evaluation Methodtotal Value Wise Evaluation Z & Z & /arbitration Clauseno /mediation Clauseno



//bid Details  

/emd Detail  > /advisory Bankstate Bank Of India  /emd Amount93560

/epbg Detail  > /advisory Bankstate Bank Of India 4 %/epbg Percentage%3.00  I /duration Of Epbgrequired Months.6a.  . 

% & 4&  % &
% 4  > ^ O 9 /emd Exemption: The Bidder Seeking Emd Exemption, Must Submit The Valid Supporting Document2 / 33 For The Relevant Category As Per Gem Gtc With The Bid. Under Mse Category, Only Manufacturers For Goods Andservice Providers For Services Are Eligible For Exemption From Emd. Traders Are Excluded From The Purview Of Thispolicy.b.  , , W < ; / Emd & Performance Securityshould Bein Favour Of Beneficiary, Wherever It Is Applicable. /beneficiary : Cwecommander Works Engineer Army Mudfort Secunderbad, Department Of Military Affairs, Indian Army, Ministry Ofdefencecwe Army Secunderabad

/splitting
 ; / Bid Splitting Not Applied.     /mii Purchase Preference   /mii Purchase Preferenceyes     /mse Purchase Preference   /mse Purchase Preferenceyes1. Preference To Make In India Products For Bids < 200 Crore:preference Shall Be Given To Class 1 Local Supplieras Defined In Public Procurement Preference To Make In India, Order 2017 As Amended From Time To Time And Itssubsequent Orders/notifications Issued By Concerned Nodal Ministry For Specific Goods/products. The Minimumlocal Content To Qualify As A Class 1 Local Supplier Is Denoted In The Bid Document. If The Bidder Wants To Avail Thepurchase Preference, The Bidder Must Upload A Certificate From The Oem Regarding The Percentage Of The Localcontent And The Details Of Locations At Which The Local Value Addition Is Made Along With Their Bid, Failing Whichno Purchase Preference Shall Be Granted. In Case The Bid Value Is More Than Rs 10 Crore, The Declaration Relatingto Percentage Of Local Content Shall Be Certified By The Statutory Auditor Or Cost Auditor, If The Oem Is A Companyand By A Practicing Cost Accountant Or A Chartered Accountant For Oems Other Than Companies As Per The Publicprocurement Preference To Make-in -india Order 2017 Dated 04.06.2020. Only Class-i And Class-ii Local Suppliersas Per Mii Order Dated 4.6.2020 Will Be Eligible To Bid. Non - Local Suppliers As Per Mii Order Dated 04.06.2020 Arenot Eligible To Participate. However, Eligible Micro And Small Enterprises Will Be Allowed To Participate .thebuyers Are Advised To Refer The Om No.f.1/4/2021-ppd Dated 18.05.2023.om No.1 4 2021 Ppd Dated 18.05.2023 For Compliance Of Concurrent Application Of Public Procurement Policyfor Micro And Small Enterprises Order, 2012 And Public Procurement Preference To Make In India Order, 2017. 2. Purchase Preference Will Be Given To Mses Having Valid Udyam Registration And Whose Credentials Arevalidated Online Through Udyam Registration Portal As Defined In Public Procurement Policy For Micro And Smallenterprises Mses Order, 2012 Dated 23.03.2012 Issued By Ministry Of Micro, Small And Medium Enterprises Andits Subsequent Orders/notifications Issued By Concerned Ministry. If The Bidder Wants To Avail Themselves Of Thepurchase Preference, The Bidder Must Be The Manufacturer / Oem Of The Offered Product On Gem. Traders Areexcluded From The Purview Of Public Procurement Policy For Micro And Small Enterprises And Hence Resellersoffering Products Manufactured By Some Other Oem Are Not Eligible For Any Purchase Preference. In Respect Of Bidfor Services, The Bidder Must Be The Service Provider Of The Offered Service. Relevant Documentary Evidence Inthis Regard Shall Be Uploaded Along With The Bid In Respect Of The Offered Product Or Service And Buyer Will Decideeligibility For Purchase Preference Based On Documentary Evidence Submitted, While Evaluating The Bid. If L-1 Isnot An Mse And Mse Seller S Has / Have Quoted Price Within L-1+ 15% Selected By Buyer Of Margin Ofpurchase Preference /price Band Defined In Relevant Policy, Such Mse Seller Shall Be Given Opportunity To Matchl-1 Price And Contract Will Be Awarded For 25% Selected By Buyer Percentage Of Total Quantity. The Buyers Are3 / 33 Advised To Refer The Om No. F.1/4/2021-ppd Dated 18.05.2023 Om No.1 4 2021 Ppd Dated 18.05.2023 Forcompliance Of Concurrent Application Of Public Procurement Policy For Micro And Small Enterprises Order, 2012and Public Procurement Preference To Make In India Order, 2017. Benefits Of Mse Will Be Allowed Only If Seller Isvalidated On-line In Gem Profile As Well As Validated And Approved By Buyer After Evaluation Of Documentssubmitted. 3. Estimated Bid Value Indicated Above Is Being Declared Solely For The Purpose Of Guidance On Emd Amount Andfor Determining The Eligibility Criteria Related To Turn Over, Past Performance And Project / Past Experience Etc.this Has No Relevance Or Bearing On The Price To Be Quoted By The Bidders And Is Also Not Going To Have Anyimpact On Bid Participation. Also This Is Not Going To Be Used As A Criteria In Determining Reasonableness Ofquoted Prices Which Would Be Determined By The Buyer Based On Its Own Assessment Of Reasonableness Andbased On Competitive Prices Received In Bid / Ra Process. 4. Past Performance: The Bidder Or Its Oem Themselves Or Through Re-sellers Should Have Supplied Same Or

Gem Bids For Rotational Moulded Polyethylene Water Storage Tanks V2conforming To Is 12701 Q3, Chequered Plywood For Busbody Building Parts As Per Is 3513 Latest Q3

Gem Bids For Rotational Moulded Polyethylene Water Storage Tanks V2conforming To Is 12701 Q3

Gem Bids For Rotational Moulded Polyethylene Water Storage Tanks V2conforming To Is 12701 Q3

Gem Bids For Copper Alloy Taps/stop Valves V2 Conforming To Is 8931q3, Rotational Moulded Polyethylene Water Storage Tanksv2 Conforming To Is 12701 Q3, Bathroom Or Toilet Mirrorv2 Q4, Stainless Steel Shelf Rack Q3, Sinks Q3, Bathroom Water Shower V2 Q3, Water Fittings - Copperalloy Float Valves Horizontal Plunger Type As Per Is: 1703q4, Soap Dish - Case Q4, Copper Alloy Gate Valve Forwaterworks Purpose As Per Is 778 Q3, Wire Mesh Fabricor Cloth V2 As Per Is 1568 Q3

Provision Of Polyethylene Water Storage Tank, Removing Malba Of Collapsed Rcc Water Tank And Dismantling Another Deteriorated Rcc Water Tank And Old Ac Packaging At Gf On Terrace Floor At Te Garamnala Ba - Jamshedpur

Gem bids for Pipe, Bid Number Gem2025b6604196 Dated 23-08-2025 Bid Document1 53 1 1 Composite Multi Layer Pipe Of Size Inner Dia 25Mm And Outerdia 32Mm As Per Tech Spec, Gi Tank Nipple 25Mm 6 Inchwith Check Nut And Washer, Ppr Elbow 32Mm, Ppr Socket32mm, Ppr Equal Union Inner Dia 25Mm And Outer Dia32mm, Ppr End Cap 32Mm Dia Suitable For 32Mm Outer Dia, Ppr Connector 32Mm Dia Suitable For 32 Or 25Mm Outer Diapipe, Ppr Tee 32Mm Dia Suitable For 32Mm Outer Dia Pipe, Ppr Reducer 32Mm Dia Suitable For 32Mm Outer Dia Pipe, Gi Nipple 25Mm 3 Inch Long, M Seal 100 Gm Each Pkt, Cotton Thread 100M Long, Bib Cock Brass 15Mm, Gi Nipple25mm 4 Inch Long, Gi Nipple 25Mm 6 Inch Long, Gi Equalunion Inner Dia 25Mm And Outer Dia 32Mm, Gi Tee 25Mm, Gi Tee 15Mm, Gi Socket 25Mm, Gate Valve Brass Gunmetal 25Mm Dia, Gi Pipe 15 Mm Dia Med Grade, Gi Pipe 20Mm Dia Med Grade, Gi Reducer 25Mm To 15Mm, Gi Elbow25mm, Gi Elbow 15Mm, Gi Nipple 15Mm 4 Inch Long, Ginipple 15Mm 6 Inch Long, Gi Socket 15Mm, Gi Union 15Mm, Gi Union 25Mm, Gi Plug 25Mm, Gi Plug 15Mm, Tmtanchor Pins To Secure Cml Pipe At 10M Distance, Triplexplunger Pump Of 7.5 Hp At 550 Rpm With Discharge Capacityof 46 Lpm As Per Tech Spec, Triplex Plunger Pump Of 5 Hp At450 Rpm With Discharge Capacity Of 38 Lpm As Per Tech Spec, Pre Fabricated Pump Shed Of Size 2.4M X 2.4M And Height1.8M At Front Side And 1.60 M At Rear Side As Per Drg Att, Rotational Moulded Polyethylene Water Storage Tanks 5000Ltrs Tripple Layer, Quick Setting Compound Rapidite, M Sandfind Sand Free From Moisture Organic Matter Confirming Tois 383-1970, Aggregate 20Mm Conforming To Is 383-1970, Aggregate 40Mm Conforming To Is 383-1970, Commonbuilding Burnt Clay Bricks Sub Class B Of Size 23Cm X 11.5Cmx 7.5Cm Conforming To Is 1077 -1986, Hdpe Sand Baglaminated Off Size 75X40cm Sand Colour And Each Baghaving Weight Not Less Than 60Gms, Tasla Iron 18 Inch, Mason Trowel Or Karchi, Plaster Trowel With Hard Woodenhandle, Showel With Wooden Handle, Brick Hammer 1.2 Kgs, Multipurpose Non Slip Rubber Gloves Make Safeyura Esabjupiter Seamless, Adjustable Spanner 12 Inch, Hacksawframe With 2 Blade, Fawda With Wooden Handle, Pipewrench 12 Inch, Pipe Wrench 18 Inch, Crowbar 25Mm 5 Ftlong, Aluminimum Spirit Level 6 Inch, Brick Line, Rammerwith Wooden Handle Wt 5 Kg, Spanner Adjustable 18 Inch, Iron Sheet Cutting Machine, Sheet Cutting Blade, Plumbingdye Set 25-50 Mm, Hacksaw Frame Blade Double End, Bricktrowel Steel 305 Mm With Handle., Plaster Trowel With Hardwooden Handle Isi Marked., Galvanised Iron Pan Mortartasla 16 Gauge 16 Inch Dia Minimum Weight Of 1.5 Kg, Showel Square Nose 14 Gauge Tata High Carbon Steel, Product Code Svl 022, Brick Hammer 1.2Kgs, Masontrowel Karchi, Picks Axes With Chiesel And Point Endnominalweight 3.0 Kg Length 595 Mm With Hard Wooden Handle, Phowrah With Hard Wooden Handles With Min Weight 2.00Kgs, Crowbar 25Mm 5 Ft Long, Rammer With Woodenhandle Of Wt 510 Lbs, Aluminum Spirit Level 6 Inch, Industrial Safety Helmet Ratcht Colour Orange Or Yellowmake Shelcom Melcom Akiton, Spectacles, Frameless With99.9 Percentage Uv Protected Polycarbonate Clear Lens, Hand Glove Pairs Having Hppe Cut 4 Liner 13 Gauge Withblack Pu Coating Make Karam Super Safety, Reflective Vestmake Shelcom, Melcom, Akiton, Rain Poncho Camouflagepattern Makeshalimaar Or Equivalent., Mega Phoneam215m Make Ahuja Equivalent, Gum Boot Make Hilsonvelsafe Wth



//Bid Details2 / 53

Supply And Installation Of Rectangular L Supply And Installation Of Rectangular Loft Tank 500 Liters Rotational Moulded Polyethylene Water Storage Tanks, As Per Requirement And Specification Attached Brand: Sintex Neo Or Similar With All Plumbing And Piping Work With Angles And Brackets For Fixation As Required By Railways..

Gem Bids For Copper Alloy Taps/stop Valves V2 Conforming To Is 8931q3, Wire Mesh Fabric Or Cloth V2 As Per Is 1568 Q3, Rotational Moulded Polyethylene Water Storage Tanks V2conforming To Is 12701 Q3, Towel Rail / Ring For Bathroomq3, Waste Fittings For Washbasin And Sinks As Per Is 2963q3, Waste Pipe Q3, Floor Drain Traps Q3

Gem Bids For Rotational Molded Polyethylene Water Storage Tanks V2conforming To Is 12701 Q3

Gem Bids For Water Fittings - Copper Alloy Float Valves Horizontalplunger Type As Per Is: 1703 Q4, Copper Alloy Gatevalve For Waterworks Purpose As Per Is 778 Q3, Floordrain Traps Q3, Rotational Moulded Polyethylene Waterstorage Tanks V2 Conforming To Is 12701 Q3