Supply, Installation, Testing And Commissioning Of Smps Based Integrated Power Supply Ips Sys Tem As Per Rdso Spec. No.Rdso/Spn/165/2012 Ver.-3.0 Along With Surge Protection Device, Status Monitorin G Panel, Spares, Tool Kit, Lmla Battery Consisting Of 55 Plus 5 Cells Cells As Per Rdso Spec. Irs:S-88/2004 Alo Ng With Battery Stand.The Configuration Of Ips Should Be As Per Ncr/Hq Drawing No. Typ/2017 /0002-10 For Ibs With Lc Gate .This Includes Transporation To Consignee Depot, From Consignee Depot To Site. Warranty Period: 3 0 Months After The Date Of Delivery Supply, Installation, Testing And Commissoning Of Smps Based Integrated Power Supply Ipssys Tem As Per Rdso Spec. No. Rdso/Spn/165/2012 Ver 3.0 Aiong With Surge Protection Device, Status Monitoring Panel, Spares, Tool Kit, Lmla Battery Consisting Of 55 Plus 5 Sells Cellsas Per Rdso Spece.Irs:S-88/2004 Along With Battery Stand . The Configuration Of Ips Should Be Per Ncr/Hq Drawing No. Typ/2017/0002-11 For Relay Hu T /Lsc With Aftc, Axle Counter And Lc Gate.This Includes Transportation To Consignee Depot, From Consignee Dep Ot To Site, Installation And Commissioning Of Integrated Power Supply System After Duly Filling Precommissioning C Heck List Jointly By Rdso Approved Vendor And Railway Representative.Item Shall Be Procured Though Store Wi Th Gst, Frieght And Commissioning Charges.This Includes Transporation To Consignee Depot, From C Onsignee Depot To Site. Warranty Period: 30 Months After The Date Of Delivery Supply And Comissioning Of Smps Based Integrated Power Supply System For Interlocked Lc Gate In Re Section As Per Rdso Specn.No. Rdso/Spn/165/2023 Ver. 4. 0 Amdt.1 As Per Drawing Attached Of Along With Battery Set Of 110V/300Ah.This Includes Tr Ansporation To Consignee Depot, From Consignee Depot To Site. Warranty Period: 30 Months After The Date Of Del Ivery Supply Installation Testing And Commissioning Of Smps Based Integrated Power Supply Ips Syst Em, As Per Rdso Spec. No. Rdso/Spn/165/2012 Ver.3.0 Along With Surge Protection Device, Status Monitorin G Panel, Spares, Tool Kit, Lmla Battery Consisting Of 55 Plus 5 Cells Cells As Per Rdso Spec. Irs:S-88/2004 A Long With Battery Stand. The Configuration Of Ips Should Be As Per Ncr/ Hq Drawing No. Typ/2017/0002-06 For Ei Station Up To 04 Lines With Block Panel And Lc Gate. This Includes Transportation To Consignee Depot From Consi Gnee Depot To Site, Installation And Commissioning Of Integrated Power Supply System After Duly Filing Pre Commi Ssioning Check List Jointly By Rdso Approved Vendor And Railway Representative.This Includes Transporation To C Onsignee Depot, From Consignee Depot To Site. Warranty Period: 30 Months After The Date Of Delivery Supply, Installation Testing And Commissioning Of Smps Based Integrated Power Supply System I Ps , As Per Rdso Spec. No. Rdso/Spn/165/2012 Ver.3.0 Along With Surge Protection Device, Status Monitori Ng Panel, Spares, Tool Kit, Lmla Battery Consisting Of 55 Plus 5 Cells Cell As Per Rdso Spec. Irs-S-88/2004 Al Ong With Battery Stand. The Configuration Of Ips Should Be As Per Ncr/Hq Drawing No. Typ/2017/0002-08 For Ei Station Up To 6 Lines With Block Panel And Lc Gate.This Include Transporation To Consignee Depot To Site, Installatio N And Commissioning Of Integrated Power Supply System After Duly Filling Pre Commissioning Checklist Jointly By Rdso Approved Vendor And Railway Representative.This Includes Transporation To Consignee Depot, From Consig Nee Depot To Site. Warranty Period: 30 Months After The Date Of Delivery
Supply Of Spares -1.5 Sq.Mm Of Single Core Multi Strand Fr-Lsh Pvc Insulated Industrial Grade Copper Conductor Unsheathed Flexible Cables, 1100 Volt Conforming To Is 694., 2.5 Sqmm. Single Core Multi Strand Fr-Lsh Pvc Insulated Industrial Grade Copper Conductor Unsheathed Flexible Cables, 1100 Volt Conforming To Is 694., 4.0 Sqmm. Single Core Multi Strand Fr-Lsh Pvc Insulated Industrial Grade Copper Conductor Unsheathed Flexible Cables, 1100 Volt Conforming To Is 694 ., 3Cx1.5 Sq.Mm Frls Pvc Insulated And Pvc Sheathed, Multicore, Multi Strand Annealed Bare Copper Conductor Flexible Industrial Cable For Voltage Grade 1100 Volt, Conforming To Is 694. , 3Cx2.5 Sq.Mm Frls Pvc Insulated And Pvc Sheathed, Multicore, Multi Strand Annealed Bare Copper Conductor Flexible Industrial Cable For Voltage Grade 1100 Volt, Conforming To Is 694 . , 3Cx4 Sq.Mm Frls Pvc Insulated And Pvc Sheathed, Multicore, Multi Strand Annealed Bare Copper Conductor Flexible Industrial Cable For Voltage Grade 1100 Volt, Conforming To Is 694 . , 6A To 32A Rating, 240/415V, 10Ka, C Curve Miniature Circuit Breaker Suitable For Inductive Load Of Single Pole In The Existing Mcb Db As Required., 6A To 32A Rating, 240/415V, 10Ka, C Curve Miniature Circuit Breaker Suitable For Inductive Load Of Double Pole Suitable For Existing Mcb Db As Required., 6A To 32A Rating, 240/415V, 10Ka, C Curve Miniature Circuit Breaker Suitable For Inductive Load Of Triple Pole Suitable For The Existing Mcb Db As Required., 6A To 32A Rating, 240/415V, 10Ka, C Curve Miniature Circuit Breaker Suitable For Inductive Load Of Triple Pole And Neutral Suitable For The Existing Mcb Db As Required., 40A Rating, Four Pole, 415V, 50Hz Isolator Suitable For The Existing Mcb Db As Required., 63A Rating, Four Pole, 415V, 50Hz Isolator Suitable For The Existing Mcb Db As Required., 25A Rating, Double Pole Single Phase And Neutral, 240V Residual Current Circuit Breaker Rccb Having A Sensitivity Current 30Ma Suitable For The Existing Mcb Db As Required., 40A Rating, Double Pole Single Phase And Neutral, 240V Residual Current Circuit Breaker Rccb Having A Sensitivity Current 30Ma Suitable For The Existing Mcb Db As Required., 63A Rating, Double Pole Single Phase And Neutral, 240V Residual Current Circuit Breaker Rccb Having A Sensitivity Current 30Ma Suitable For The Existing Mcb Db As Required., Suitable Size Gi Box With Modular Plate And Cover Including Providing 1 No.3 Pin 5/6A Modular Socket Outlet And 1 No. 5/6A Modular Switch Etc. Complete As Required., Suitable Size Gi Box With Modular Plate And Cover Including Providing 1 No.6 Pin 5/6A & 15/16A Modular Socket Outlet And 1 No. 15/16A Modular Switch Etc. Complete As Required., Heavy Duty Pvc Casing Capping- Casing Bearing Isi Mark Of Size- 20Mmx12mm, Heavy Duty Pvc Casing Capping- Casing Bearing Isi Mark Of Size- 25Mmx16mm, 5/6 Amp Switch Modular Type Switch/Socket For The Existing Modular Plate & Switch Box Etc. Complete As Required., 15/16 Amp Switch Modular Type Switch/Socket For The Existing Modular Plate & Switch Box Etc. Complete As Required., 3 Pin 5/6 Amp Socket Outlet Modular Type Switch/Socket For The Existing Modular Plate & Switch Box Etc. Complete As Required., 6 Pin 15/16 Amp Socket Outlet Modular Type Switch/Socket For The Existing Modular Plate & Switch Box Etc. Complete As Required., Call Bell Suitable For Single Phase, 230V Complete As Required At Site., 2X2 Feet 36 W Led Light Fixture Recess Type Suitable For Operation On Single Phase 230V, 50Hz Power Supply Complete As Required As Per Enclosed Technical Specification ., 3- Pin, 5/6 Amp Isi Marked Plug Top Suitable For Operation On Single Phase 230V, 50Hz Power Supply., 3- Pin, 15/16 Amp Isi Marked Plug Top Suitable For Operation On Single Phase 230V, 50Hz Power Supply., Red Outer Lens For Rwy End Light Suitable For Existing Airfield Ground Lighting System Agl Complete As Required . Existing Light Fixture Is Of Vardhman Make, Green Outer Lens For Rwy Threshold Light Suitable For Existing Airfield Ground Lighting System Agl Complete As Required . Existing Light Fixture Is Of Vardhman Make, Yellow Filter For Runway Edge Light Suitable For Existing Airfield Ground Lighting System Agl Complete As Required . Existing Light Fixture Is Of Vardhman Make, 5 Kv Grade Plug & Receptacle Type-I Suitable For Single Core 6 Sqmm Airfield Cable Complete As Required ., 150W, 6.6/6.6A Halogen Lamp Pk30d64361 Hlx-Z, Make -Osram Or Equivalent Suitable For Existing Agl/ Cat-I Fittings Complete As Required ., 200W, 6.6/6.6A Halogen Lamp Pk30d64382 Hlx-C Make - Osram Or Equivalent Suitable For Existing Agl/ Cat-I Fittings Complete As Required ., Isolating Transformer Of 15 Watts, 6.6A/6.6A, 5Kv, 50Hz Suitable For Existing Agl/Cat-I Light Fixtures Complete As Required, Isolating Transformer Of 45 Watts, 6.6A/6.6A, 5Kv, 50Hz Suitable For Existing Agl/Cat-I Light Fixtures Complete As Required, Isolating Transformer Of 100 Watts, 6.6A/6.6A, 5Kv, 50 Hz Suitable For Existing Agl/Cat-I Light Fixtures Complete As Required, Isolating Transformer Of 150 Watts, 6.6A/6.6A, 5Kv, 50 Hz, Suitable For Existing Agl/Cat-I Light Fixtures Complete As Required, Isolating Transformer Of 200 Watts, 6.6A/6.6A, 5Kv, 50 Hz Suitable For Existing Agl/Cat-I Light Fixtures Complete As Required, Beacon Lamp Of 1000W Par64 Ffp 120Vac Or Equivalent Suitable For Existing Becon Light Fixture Complete As Required., Cable Jointing Kit For 1X6 Sqmm Afl Cable Complete As Required ., Hrc High Speed Fuse-Semi Conductor Protection Fuse-Bs88 Type, 100Fe, 100A Rating, Voltage 690Vac, Breaking Capacity 200 Ka Suitable For Existing Switch Gear Make-Bussmann Series Eaton Or Equivalent For Electrical And Agl And Cat I Lighting System
Procurement Of Spares - Circuit Breaker Sub. Assy Comp. With Ct And Incoming And Outgoing Lead Cb, Part No. Cb 200Bc, Earth Leakage Relay Part No. Cb 200C 3Ma, Fixed Contact, Part No.Cb 200B 1, Moving Contact, Part No.Cb 200B 2, Moving Contact Carrier, Part No.Cb 200B 3, Fixed Contact Carrier, Part No.Cb 200B 4, Copper Braided Wire For Moving Contact, Part No.Cb 200B 9, Control Panel Assy. With Upto 750Ma Earth Leakage Relay, Part No.Cb 200C Ma, Auxiliary Transformer 100Va, Part No.Cb 200C 1A, Test Microswitch, Part No.Cb 200C 5, Microswitch For Earth Leakage Lamp, Part No.Cb 200C 7, Bridge Rectifier, Part No.B 200C 9, Isolator On Off Heavy Duty, Part No.Cb 200D 1 Hd, Current Transformer For Overload, Part No.Cb 200D 3B, Current Transformer For Ammeter, Part No.Cb 200D 3C, Ammeter, Part No.Cb 200D 4, Earth Leakage Lamp Holder With Lamp, Part No.Cb 200D 5, Brass Gland, Part No.Cb 200D 7A2, Lead Cone, Part No.Cb 200D 7A3, Test Reset Spindle With Flapper, Part No.Cb 200D 10, Test Reset Key, Part No.Cb 200D 10A, Ht Bolt For Front Cover, Part No.Cb 200D 11, Ht Bolt For Top Cover, Part No.Cb 200D 11A, Ht Bolt For Cable Box, Part No.Cb 200D 11B, Incoming Terminal, Part No.Cb 200D 12, Throughgoing Terminal, Part No.Cb 200D 12A, Interconnecting Terminal, Part No.Cb 200D 12B2, Outgoing Terminal, Part No.Cb 200D 12C2, Incoming Terminal Dmc Moulded, Part No.Cb 200D 12Fn, Throughgoing Terminal Dmc Moulded, Part No.Cb 200D 12Gn, Interconnecting Terminal Dmc Moulded, Part No.Cb 200D 12Hn, Outgoing Terminal Dmc Moulded, Part No.Cb 200D 12In, Copper Busbar With Sleeving R, Part No.Cb 200D 13, Copper Busbar With Sleeving Y, Part No.Cb 200D 13, Copper Busbar With Sleeving B, Part No.Cb 200D 13, Incoming Lead Cb, Part No.Cb 200D 16B, Outgoing Lead Cb, Part No.Cb 200D 17B, Isolator Lead Incoming, Part No.Cb 200D, Isolator Lead Outgoing, Part No.Cb 200D 20A, Emergency Trip Relay, Part No.Cb 200D 23, Fixed Contact Part No. Cb 300B 1, Moving Contact Part No. Cb 300B 2, Moving Contact Carrier, Part No.Cb 300B 3, Fixed Contact Carrier, Part No.Cb 300B 4, Copper Braided Wire For Moving Contact, Part No.Cb 300B 9, Shunt Trip Coil, Part No.Cb 300B 15, Control Panel Assy With Upto 750Ma El Relay, Part No.Cb 300C Ma, Test Microswitch, Part No.Cb 300C 5, Resistance, Part No.Cb 300C 6, Bridge Rectifier, Part No.Cb 300C 9, Sensitive Cbt For Earth Leakage Relay 750Ma, Part No. Cb 300D 2 Ma, Earth Leakage Lamp Holder With Lamp, Part No.Cb 300D 5, Isolator Interlocking Microswitch, Part No. Cb 300D 6, Brass Gland, Part No.Cb 300D 7A2, Ht Bolt For Front Cover, Part No.Cb 300D 11, Ht Bolt For Top Cover, Part No. Cb 300D 11A, Ht Bolt For Cable Box, Part No. Cb 300D 11B, Incoming Terminal Dmc Moulded, Part No. Cb 300D 12Fn, Throughgoing Terminal Dmc Moulded, Part No. Cb 300D 12Gn, Interconnecting Terminal Dmc Moulded, Part No. Cb 300D 12Hn, Outgoing Terminal Dmc Moulded, Part No. Cb 300D 12In, Copper Busbar With Sleeving- R, Part No. Cb 300D 13, Copper Busbar With Sleeving- Y, Part No. Cb 300D 13, Copper Busbar With Sleeving- B, Part No. Cb 300D 13, Incoming Lead Cb, Part No. Cb 300D 16C, Outgoing Lead Cb, Part No. Cb 300D 17C, Circuit Breaker Sub. Assy.Comp. With Ct And Incoming And Outgoing Lead Cb, Part No.Cb 400Bc, Fixed Contact, Part No.Cb 400B 1, Moving Contact, Part No.Cb 400B 2, Moving Contact Carrier, Part No.Cb 400B 3, Fixed Contact Carrier, Part No.Cb 400B 4, Copper Braided Wire For Moving Contact, Part No.Cb 400B 9, Control Panel Assy. With Upto 750Ma Earth Leakage Relay, Part No.Cb 400C Ma, Auxiliary Transformer 100Va, Part No.Cb 400C 1A, Test Microswitch, Part No.Cb 400C 5, Microswitch For Earth Leakage Lamp, Part No.Cb 400C 7, Bridge Rectifier, Part No.Cb 400C 9, Isolator On Off Heavy Duty, Part No.Cb 400D 1Hd, Current Transformer For Overload, Part No.Cb 400D 3F, Current Transformer For Ammeter, Part No.Cb 400D 3G, Ammeter, Part No.Cb 400D 4, Earth Leakage Lamp Holder With Lamp, Part No.Cb 400D 5, Brass Gland, Part No.Cb 400D 7A2, Lead Cone, Part No.Cb 400D 7A3, Test Reset Spindle With Flapper, Part No.Cb 400D 10, Test Reset Key, Part No.Cb 400D 10A, Ht Bolt For Front Top Cover, Part No.Cb 400D 11, Ht Bolt For Cable Box, Part No.Cb 400D 11A, Incoming Terminal, Part No.Cb 400D 12, Throughgoing Terminal, Part No.Cb 400D 12A, Interconnecting Terminal, Part No.Cb 400D 12B, Outgoing Terminal, Part No.Cb 400D 12C, Incoming Terminal Dmc Moulded, Part No.Cb 400D 12Fn, Throughgoing Terminal Dmc Moulded, Part No.Cb 400D 12Gn, Interconnecting Terminal Dmc Moulded, Part No.Cb 400D 12Hn, Outgoing Terminal Dmc Moulded, Part No.Cb 400D 12In, Copper Busbar With Sleeving-R, Part No.Cb 400D 13, Copper Busbar With Sleeving-Y, Part No.Cb 400D 13, Copper Busbar With Sleeving-B, Part No.Cb 400D 13, Incoming Lead Cb, Part No.Cb 400D 16, Outgoing Lead Cb, Part No.Cb 400D 17, Isolator Lead Incoming, Part No.Cb 400D 19, Isolator Lead Outgoing, Part No.Cb 400D 20, Emergency Trip Relay, Part No.Cb 400D 23, Transformer Panel With All Components But With Transformer, Part No.Sdp A-0001A, Electromagnetic Earth Leakage System, Part No.Sdp A-0001 2, Bridge Rectifier Unit, Part No.Sdp A0001 2D, Diode, Part No.Sdp A-0001 2D1, Condenser, Part No.Sdp A-0001 2D2, Relay Base With Wiring, Part No.Sdp A0001 2E, Thermal Overload Relay, Part No.Sdp A-0001 5, Hrc Fuse, Part No.Sdp A-0001 6, Test Reset Microswitch, Part No.Sdp A-0001 8, Leakage Indication Lamp, Leakage Indication Lamp Holder, Part No.Sdp A-0001 10, Glass Cartidge Fuse, Part No.Sdp A0001 11, Glass Cartidge Fuse Holder, Part No.Sdp A-0001 12, Dmc Pin Insulator, Part No.Sdp A-0002 1A, Pin Contacts Pilot, Part No.Sdp A-0002 1B, Pin Contacts Main, Part No.Sdp A-0002 1B1, Brass Gland, Part No.Sdp A-0009 A1, 30A Restrained Plug And Socket Complete, Part No.Sdp A-0002, G.I. Stud With Nut, Part No.Sdp A-0009 A4n, Test Reset Key, Part No. Sdp A-0012, Ht Bolt For Terminal Box, Part No.Sdp A-0014, Ht Bolt For Elbow, Part No.Sdp A-0015, Ht Bolt For Plug And Socket, Part No.Sdp A-0016, Sensitive Earth Leakage Relay Upto 750Ma, Part No.Sdp A-0019Ma, Machanical Latch Type Earth Leakage Relay With Contact Block, Part No.Sdp A-0020, Isolator Reversing 200A, Part No.Fg 101, Terminal With Insulator Incoming, Part No.Fg 104, Terminal With Insulator Throughgoing, Part No.Fg 104A, Terminal With Insulator Inconnecting, Part No.Fg 104B, Dmc Terminal Bushing, Part No.Fg 104C, Copper Busbar With Sleeving- R, Part No.Fg 105, Copper Busbar With Sleeving- Y, Part No.Fg 105, Copper Busbar With Sleeving- B, Part No.Fg 105, Brass Gland, Part No.Fg 107A1, Auxiliary Contactor, Part No.Fg 110 C, Main Contactor 200Amps, Part No. Fg 110 1, Leakage Indication Lamp, Part No.Fg 114, Sensitive Earth Leakage Relay Upto 750Ma, Part No.Fg 115Ma, Sensitive Cbt For Earth Leakage Relay 750Ma, Part No.Fg 116Ma, Selenium Bridge Rectifier, Part No.Fg 117, Resistance, Part No.Fg 118, Auxiliary Transformer 150Va, Part No.Fg 119A, Pilot Relay, Part No.Fg 120, Test Reset Key, Part No.Fg 129, Ht Bolt For Front Cover, Part No.Fg 132, Ht Bolt For Top Cover, Part No.Fg 133, Ht Bolt For Terminal Box, Part No.Fg 134, Toggle Switch, Part No.Fg 139, Fuse Base For Short Fuse Link, Part No.Fg 140, Fuse Base Forcontrol Link, Part No.Fg 140An, Fuse Link For Short Circuit Protection, Part No.Fg 141, Fuse Link For Control Circuit, Part No.Fg 141An, Diode, Part No.Fg 142, Condenser, Part No.Fg 143, Plug And Socket Assly.Comp. 200Amp, Sdl Side, Part No. Fg 146, Plug And Socket Assly.Comp. 200Amp, Geb Side, Part No. Fg 147, Pt For Lighting Transformer 400Va, 550V, 12V, 24V Sdl Side, For Abc Make Electrical Equipments
Supply Of Mt Spares - Lv7 Tmb 2614-3375-0101 Assy Drive Shaft Right Complete, Lv7 Tmb 2574-4215-0113 Wheel Cyl With Citradelip 44.45 Mm Dia, Lv7 Tmb 2786-0799-9971 Fuel Lift Pump, Lv7 Tmb 2523-0715-0104 Cold Start Pilot Kit, Lv7 Tmb 2573-2520-0108 Assy 310 Dia Clutch Disc, Lv7 Tmb 2654-4310-0111 Brake Fluid Container Assy, Lv7 Tmb 2625-8067 Armature Assy, Lv7 Tmb 2786- 0911-9903 Separater Fuel Water, Lv7 Tmb 2576-4374- 0108 4 Way System Protection Valve, Lv7 Tmb 2618- 2910-0109 Major Repair Kit For Master Cylinder, Lv7 Tmb 2786-0399-9970 Fly Wheel Assy, Lv7 Tmb 2636- 1540-4904 Terminal Positive, Lv6 Mt7 3110-002012 Bearing Tappered Roller, Lv6 Mt7 3110-001963 Bearing Tappered Roller 15X42x14.25Mm, Lv7 Tmb 2786-1599-9966 Starter Motor 24 Volts
Supply of Automatic Smoke/Fire Detection With Alarm System In Each Coach As Per Clause 2.9.2 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendu Months After The Date Of Delivery Load Weighing System Including Redundant Weight Sensors At Bogie Level, Junction Boxes For Interfacing Cables, Mating Connectors, Ss Hardware, Cable Markers And Crimp Conta Clause 4.26 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per Coach. Warranty Period: 36 Months Af Complete Air-Conditioning System Passenger Coaches As Per Clause 4.39 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrige Mounted Package Unit Rmpu, Micro-Controller, Control Panel, Bellows, Gaskets And Suitable Drain Arrangement Including Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Powe Hardware And Accessories. One Set Per Coach Note: Quantity Includes 60 Sets As Spares. Warranty Period: 36 Months After The Date Of Delivery 3-Phase To Single Phase Underslung Transformer Of Adequate Capacity Not Less Than 20 Kva For Auxiliary Loadsoperating At 230 V Ac And 110 V Acas Per Clause No. 4.1.1 Xxx Latest Addendum Corrigendum And Annexures. One Number Per Coach Except Pantry Car. Note: Quantity Includes 60 Sets As Spares. Warranty Period: 36 Months After The Da Star - Star 415/415V Transformer With Neutral On Secondary Side Of Adequate Capacity Not Less Than 80 Kva As Per Clause No. 4.1.1 Xxxx Of Rdso Specification No. Rdso/ Annexuresto Cater The Pantry Loads Approx. 80 Kva Operating At 415 V & 230 V. The Transformer Should Also Cater To The 110 V Ac Auxiliary Loads Through Additional Winding.One No Per Pa Period: 36 Months After The Date Of Delivery Set Of Equipment, Switch Gears For Toilet Operation In Emergency Mode In Assembled Form Including Pre-Wired Pump Control Panel Assembly, 750 Va Inverter, Vtc Compres Icf/Elec/175. One Set Per Coach Warranty Period: 36 Months After The Date Of Delivery Event Recorder As Per Clause 4.10And Cab Recording Equipment As Per Clause 4.14Of Rdso Specification No. Rdso/Pe/Spec/ Emu/0196-2019 Rev-0 With All Latest Addendu Months After The Date Of Delivery Complete Pre-Fabricated Driver Desk Housing All The Necessary Equipment And Driver/ Guard Seat, Master Cum Brake Controller, Cab Recording Equipment, Including Crimping Lugs Mating Connectors, Equipment Mounting And Earthing Hardware And Accessories As Per Clause 4.16 & 4.17 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest And Software And Space For Cab Radio, Kavach Tcas, Brake Equipment And Rtis Display Shall Be In The Scope Of Supply.Pneumatic Horns, Rolling Blind And Sun Visors Are Excluded. Item Desk. One Set Per Dtc. Warranty Period: 36 Months After The Date Of Delivery Ccms Centralized Coach Monitoring System As Per Clause 4.44 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum An Of Delivery Speed Indicating Cum Recording Equipment As Per Clause 4.20 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And An Delivery Apc Receiver Compatible With Existing Track Magnets As Per Clause No. 4.1.1 Xxxvii Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addend Months After The Date Of Delivery Electrically Operated Wiper System With Washer Tank As Per Clause No. 4.17.1Iii Of Rdso Specification No. Rdso/Pe/ Spec/Emu/0196-2019 Rev-0 With All Latest Addendum C After The Date Of Delivery Roof Mounted Cab Ac Minimum Capacity 2.0 Tr With Control Panel, Mating Connectors, Water Drain Arrangement In The Unit Including Mounting Frame And Anchoring Arrangem Not Restricted To Rdso Specification No. Rdso/2007/El/Spec/0055 Latest One Set Per Dtc. Note: Quantity Includes 16 Sets As Spares. Warranty Period: 36 Months After Traction Transformer As Per Clause No. 4.3 Of Rdso Specification No.Rdso/Pe/Spec/Emu/0196-2019 Rev.0 With All Latest Addendum Corrigendum And Annexures, With Requir Current Transformers, Potential Transformers, Safety Support Arrangement Including Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Mating Connec Machines Such As Oil Pump, Oil Cooling Blowers Etc. As Per Clause 4.28 Of Rdso Spec .One Set Per Basic Unit Note: Quantity Includes 60 Sets As Spares. Warranty Period: 3 Igbt Or Sic Based Pwm Traction Converter Set As Per Clause No. 4.5 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum Chopper Resistor, Dc Link Earthing Switch, Pre-Charging Resistors And Contactors And/Or Any Other Equipment Necessary To Reduce The Effect Of Other Harmonics On S&T Equipment, Crimping Lu Mating Connectors, Equipment Mounting, Earthing Hardware And Accessories Including Associated Auxiliary Machines As Per Clause 4.28 Of Rdso Spec . One Set For One Motor Coach. Not Months After The Date Of Delivery Three-Phase Fully Suspended Asynchronous Induction Motors Or Permanent Magnet Synchronous Motor Encapsulated Designof Tractionmotor Willalsobe Acceptableas Per Clau 0 With All Latest Addendum Corrigendum And Annexure Compatible With Igbt/Sic Based Traction Converter Power Supply, With Coupling, Gear Box Assembly With All The Required Fasteners, Reac Equipment Including Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Mating Connectors, Along With All The Required Hardware, Metal Bonded Rubber Item And Earthing Hardware And Accessories . One Set Consists Of 4 Traction Motor Assembly Note: Quantity Includes 180 Sets As Spares. Warranty Period: 36 Months After The D Set Of Metal Oxide Gapless Lightning Arrestors 02 Nos. For 25 Kv Ac As Per Clause No. 4.4 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Ad Quantity Includes 120 Sets As Spares. Warranty Period: 36 Months After The Date Of Delivery Igbt/ Sic Based Auxiliary Converter Catering Power Supply Toall Auxiliariesas Per Clause No. 4.28 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev- 0 With All La Per Clause No. 4.28.18 Of Rdso Spec. The Supply Shall Include Fasteners, Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves For Power And Control Cables, Mating Connectors, Equipm Set Per Basic Unit. Note: Quantity Includes 60 Sets As Spares. Warranty Period: 36 Months After The Date Of Delivery Battery, Battery Box And Battery Charger Including Battery Management Systemas Required As Per Clause 4.29 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 R Unit. Warranty Period: 36 Months After The Date Of Delivery Pantograph With Mounting Insulators, Pneumatic Control Panel, Panto Isolating Cocks Including Interconnecting Bus Barsand Associated Stainless Steel Mounting Hardware, Matin 4.43 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. Pantograph Set Note: Quantity Includes 40 Sets As High Reach Pantograph As Per Clause 4.43 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures With Moun Interconnecting Bus Barsand Associated Stainless Steel Mounting Hardware, Mating Connectors - Single Pantograph Suitable For 25Kv Ac Supply . Hr Pantograph Set Note: Quantity In Of Delivery Set Of Two Vcbs With Earthing Switch For Traction Circuit Protection And Ht Cable Protection As Per Clause No. 4.27.1 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Basic Unit. Note: Quantity Includes 60 Sets As Spares. Warranty Period: 36 Months After The Date Of Delivery Design And Supply Of Electrical Under Frame Cable Ducts/Trays/Conduits Up To Various Equipment Of The Train Not Limited To Sor Items With Mounting And Earthing Hardware And Specification No. Rdso/Pe/Spec/ Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per Basic Unit Warranty Period: 36 Months After The Date Of Deli Microprocessor Based Train Control And Management System Tcms As Per Clause No.4.9 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Diagnosis And Display System In The Driving Cab And Multiplexing System For Relevant Control & Other Signals, Remote Diagnostics And Tracking System, Wheel Slip/Slide Protection & Anti-Skid Co System, Brake System And Fire Detection System. One Set Per End Basic Unit Warranty Period: 36 Months After The Date Of Delivery Microprocessor Based Train Control And Management System Tcms As Per Clause No.4.9 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Diagnosis And Display System In The Driving Cab And Multiplexing System For Relevant Control & Other Signals, Remote Diagnostics And Tracking System, Wheel Slip/Slide Protection & Anti-Skid Co System, Brake System And Fire Detection System. One Set Per Middle Basic Unit Warranty Period: 36 Months After The Date Of Delivery Set Of Control Equipment Such As Relays, Contactors, Circuit Breakers And Related Switchgears Etc. For Propulsion System, Controls And Auxiliaries In The Assembled Form Viz. Cub Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. The Scope Also Includes Electrical Switch Gears For Mini -Pantry Equipment In Each Coach. On Delivery Set Of Control Equipment Such As Relays, Contactors, Circuit Breakers And Related Switchgears Etc. For Propulsion System, Controls And Auxiliaries In The Assembled Form Viz. Cub Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. The Scope Also Includes Electrical Switch Gears For Mini -Pantry Equipment In Each Coach Incl Months After The Date Of Delivery High Voltage Cable Running On The Roof For Feeding Adjacent Unitsas Per Clause No. 4.27.3 Excluding Vcb And Earthing Switch And Transformer Ht Cable With Protection Shield Mechanical Including High Voltage Insulator, Inter Car Jumper Cableassemblywith Automatic Or Semi- Automatic Decoupling Arrangement Along With Crimping Lugs, All Mounting & Earthing Har Above Roof Area Of Rdso Specification No. Rdso/Pe/Spec/Emu/ 0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexuresone Set Per End Basic Unit. Warranty Period: 3 High Voltage Cable Running On The Roof For Feeding Adjacent Units As Per Clause No. 4.27.3 Excluding Vcb And Earthing Switch And Transformer Ht Cable With Protection Shield Mechanical, High Voltage Insulator, Inter Car Jumper Cable Assembly With Automatic Or Semi- Automatic Decoupling Arrangement Along With Crimping Lugs, All Mounting & Earthing Hardware, Roof Area Of Rdso Specification No. Rdso/Pe/Spec/Emu/ 0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexuresone Set Per Middle Basic Unit. Warranty Period: 36 M Power, Control, Data / Communication Cables, Fire Survival Cables In Preharnessed Form As Per Clause 4.42.13 Including Crimping Lugs, Suitable Connectors, Cable Markers With Jacket Etc. As Per Clause No. 4.42And Other Relevant Clauses Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One S Power, Control, Data / Communication Cables, Fire Survival Cables In Preharnessed Form As Per Clause 4.42.13 Including Crimping Lugs, Suitable Connectors, Cable Markers With Jacket Etc. As Per Clause No. 4.42And Other Relevant Clauses Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One S Delivery Inter-Vehicular Couplers Power And Control With Coach Jumper Cable Assembly Assembled On Ss Plate Including Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves, Ma Associated Accessories As Per Clause No. 4.42Of Rdso Specification No.Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per End Ba Inter-Vehicular Couplers Power And Control With Coach Jumper Cable Assembly Assembled On Ss Plate Including Crimping Lugs, Cable Markers With Heat Shrinkable Sleeves, Ma Associated Accessories As Per Clause No. 4.42Of Rdso Specification No.Rdso/Pe/Spec/Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per Middle Warranty Period: 36 Months After The Date Of Delivery Epdm & Emc Type Cable Glands For Sealing & Shielding Including Mounting Hardware And Fixing Brackets Generally Conforming To But Not Restricted To Rdso Specification No. Rd Period: 36 Months After The Date Of Delivery Epdm & Emc Type Cable Glands For Sealing & Shielding Including Mounting Hardware And Fixing Brackets Generally Conforming To But Not Restricted To Rdso Specification No. Rd Period: 36 Months After The Date Of Delivery Passenger Car Surveillance System Including Cctv Camerawith Nvr In Suitable Place For Cab Recording, Front View Camera, Rear View Camera In Dtc And Pantograph View C Per Clause 4.13 Of Rdso Specification No. Rdso/Pe/Spec/Emu/0196-2019 With All Latest Addendum Corrigendum And Annexures. One Set Per End Basic Unit. Warranty Period: 36 Mont Passenger Car Surveillance System Including Cctv Camera With Nvr In Suitable Place Including Rear View Camera In Ndtc And Pantograph View Camera In Pantograph Coac Specification No. Rdso/Pe/Spec/Emu/0196-2019 With All Latest Addendum Corrigendum And Annexures. One Set Per Middle Basic Unit. Warranty Period: 36 Months After The Date Of Deliv Design And Supply Of Electrical Roofcable Ducts/Trays/Conduits Up To Various Equipment Of The Train Not Limited To Sor Items With Mounting And Earthing Hardware And Associa Specification No. Rdso/Pe/Spec/ Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per Dtc. Warranty Period: 36 Months After The Date Of Delivery Design And Supply Of Electrical Roof Cable Ducts/Trays/Conduits Up To Various Equipment Of The Train Not Limited To Sor Items With Mounting And Earthing Hardware And Assoc Specification No. Rdso/Pe/Spec/ Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per First Ac Coach. Warranty Period: 36 Months After The Date Design And Supply Of Electrical Roofcable Ducts/Trays/Conduits Up To Various Equipment Of The Train Not Limited To Sor Items With Mounting And Earthing Hardware And Associa Specification No. Rdso/Pe/Spec/ Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per Second Ac Coach. Warranty Period: 36 Months After The Da Design And Supply Of Electrical Roofcable Ducts/Trays/Conduits Up To Various Equipment Of The Train Not Limited To Sor Items With Mounting And Earthing Hardware And Associa Specification No. Rdso/Pe/Spec/ Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per Third Ac Coach. Warranty Period: 36 Months After The Date Design And Supply Of Electrical Roofcable Ducts/Trays/Conduits Up To Various Equipment Of The Train Not Limited To Sor Items With Mounting And Earthing Hardware And Associa Specification No. Rdso/Pe/Spec/ Emu/0196-2019 Rev-0 With All Latest Addendum Corrigendum And Annexures. One Set Per Pantry Car. Warranty Period: 36 Months After The Date Of De
