Repairing And Replacement Of Top Damaged And Torn Plate As Per Requirement And Also Of Its Supporting Girder Of Platform 9 X 4.5 Mtr. Of Road Weighbridge 15 Capacity 60 Mt Installed At Magadh Ocp Under M-S Area
Design Manufacture And Supply Of High Tensile Aar H Type Tight Lock Cent Re Buffer Coupler Head With Transition Screw Coupling And Its Associated Compon Ents For Fitment On Broad Gauge Passenger Coaches Of Indian Railways As Per Rds O.Specn.No. Rdso/2009/Cg-22, Rev -01 One Coupler Set Shall Consists Of The Following 1.Tight Lock Coupler Head With Transition Screw Coupling And Its Associated Compo Nents 1 No Rdso Approved Firm Drgs. 2.Balanced Draft Gear With Pivot Pin 1 No Rdso Approved Firm Drgs. 3.Supporting Device For Coupler Head With M20 Fasteners 1 No Rdso Approved Firm Drgs. 4.Manual Uncoupling Device With M12 Fasteners 1 No Rdso Approved Firm Drgs. 5.Rear Carrier Plate For Draft Gear With M16 Fasteners 1 No Rd So Approved Firm Drgs. 6.Front Carrier Plate For Draft Gear With M16 Fasteners 1 N O Rdso Approved Firm Drgs. Special Condition : 1. Maintenance Manual In Soft Copy And H Ard Copy Shall Be Supplied With Item. 2.Necessary Test Certificates As Per Rdso .Spe Cn .No. Rdso/2009/Cg-22 Rev -01 Shall Be Supplied With Item. 3. Rev.03 Or Latest Revision Of Specification Rdso/2011/Cg-03 Referred In Rdso/2009/Cg-22 Rev -01 Shall Be Followe D. 4. Tenderer To Submit Rdso Approved Drawings At The Time Of Quoting The Tender. Safety Item Warranty Period: 84 Months After The Date Of Delivery
Design, Manufacture And Supply Of Improved High Tensile Tight Lock Cent Re Buffer Coupler With Aar H Type Head, Balanced Draft Gear And Its Associated C Omponents For Fitment On Broad Gauge Passenger Coaches Of Indian Railways As Pe R Rdso Spec.No.Rdso/2011/Cg-03, Rev-03. Coupler Mounting Arrangement On Under Fra Me Shall Be Generally To Icf Drg.No.Lwgfac-2-1-001 Alt E. One Coupler Set Shall Con Sists Of The Following 1.Tight Lock Coupler Head And Associated Components Refe Rence Rdso Approved Firm Drawings-Qty -1 No. 2.Balanced Draft Gear With Pivot Pin Reference Rdso Approved Firm Drawings-Qty 1 No. 3.Supporting Device For Coupler Head With M20 Fasteners Reference Rdso Approved Firm Drawings -Qty 1 No. 4.Manu Al Un Coupling Device With M12 Fasteners Reference Rdso Approved Firm Drawings - Qty -1 No. 5.Rear Carrier Plate For Draft Gear With M16 Fasteners Reference Rdso Approved Firm Drawings -Qty -1 No. 6.Front Carrier Plate For Draft Gear With M16 Fa Steners Rdso Approved Firm Drawings-Qty -1 No. Special Condition : 1. Maintenance Manu Al In Soft Copy And Hard Copy Shall Be Supplied With Item 2.Necessary Test Certifica Tes As Per Rdso .Specn .No. Rdso/2011/Cg-03, Rev-03 Shall Be Supplied With Item 3. Tende Rer To Submit Rdso Approved Drawings At The Time Of Quoting The Tender. 4. Packing Condition: Items Are To Be Packed In Two Different Boxes As Given Below. I. List Of Ite Ms To Be In Box-1 1. Balanced Draft Gear With Wedge Block Assembly & Wedge Block. 2 . Rear Carrier Plate 3. Fornt Carrier Plate 4. Fasteners For Front And Rear Carrier Plates. Ii. List Of Items To Be In Box-2 1. Coupler Head And Associated Components. 2. M Ain Pivot Pin. 3. Supporting Device For Coupler Head. 4. Fasteners For Supporting De Vice. 5. Manual Coupling Device 6. Fasteners For Manual Uncoupling Device. 7. Split Pi Ns For Carrier Plate. 8. Balance Items, If Any.. Instructions For Packing Of Fasteners . 1. Box-1: Item-4 2. Box-2, Item-4, 6 & 7/ Each To Be Packed And Sealed Separately In Trans Parent Polythene Cover Of Minimum 200 Microns With Appropriate Description Label S Kept Inside For Easy Identification. Safety Item Warranty Period: 84 Months After The Date Of Delivery
Supply Of Johnson Spares On Pac Basis Service Brake Coil, Make Johnson, Emergency Brake Coil, Make Johnson, Newel End Display, Make Johnson, Plc, Part No 9980111066, Make Johnson, Ecp Display, Part No. 9980211028 Johnson, Step, Make Johnson, G02 Card Brake Power Supply, Comb, Make Johnson, Handrail Antistatic Roller, Hand Rail Guide Roller, Step Chain Roller, Step Guide Roller, Part No 9980091020, Hand Rail Support Roller, Decking Clip, Part No. 9980161016, Decking Screw, Part No. 0013071059, Inspection Handle For Feh, Transformer- Tdb300, Fault Error Lcd Display For Newel End, , Static Brush - F01, Part No. 001 310 131, Handrail Support Roller Fddoo 12, , Handrail Speed Monitor Roller Lh, , Handrail Speed Monitor Roller Rh, , Handrail Driving Shaft H20.A121c, Landing Plate Size 1753Mm X 300.9Mm, Comb Carrier Sheet Top And Bottom, Landing Plate Size 1753Mm X 412.7Mm, Landing Plate Size 1753Mm X 418.6Mm, Landing Plate Size 1753Mm X 520.3Mm
Supply of Corrosion Items For Repair Of Icf/Rcf Type Coaches As Per Drg. No. Llh- 45/2019, Item No. 16, Alt. 1 Size- 165Mm X 2550Mm X 5Mm. Floor Supporting Plate For All Types Of Coaches. Material Specification- Irs- M-41, Grade-1. Warranty Period: 30 Months After The Date Of Delivery
Custom Bid For Services - 1 1 Alloy Steel Pipes Fabrication And Erection 10 Inch Upto 22 Inch Quantity 1248 Unit Inch Meter, Custom Bid For Services - 2 1 Carbon Steel Pipes Fabrication And Erection Upto 6 Inch Quantity 135 Unit Inch Meter, Custom Bid For Services - 3 1 Alloy Steel Pipes And Fittings Welding 20 Inch Upto 28 Inch And Greater Than Or Equal To 20Mm Thick Pipes Quantity 894 Unit Inch Dia, Custom Bid For Services - 3 2 Alloy Steel Pipes And Fittings Welding 10 Inch And 12 Inch And Less Than 10Mm Thick Pipes Quantity 712 Unit Inch Dia, Custom Bid For Services - 4 1 Carbon Steel Pipes And Fittings Welding Upto 6 Inch Std Sch Quantity 460 Unit Inch Dia, Custom Bid For Services - 5 1 Alloy Steel Pipe Fittings Quantity 51 Unit Nos, Custom Bid For Services - 6 1 Alloy Steel Pipe End Closure Erection 600 X 600 X 35Mm 100 Kg Wt Quantity 01 Unit Nos, Custom Bid For Services - 7 1 Drip Pan Assembly Fabrication And Erection 550 Nb 150Mm Height 100 Kg Wt Quantity 08 Unit Nos, Custom Bid For Services - 8 1 Safety Relief Valves Installation And Testing 150 Nb Inlet 250 Nb Outlet 350Kg Weight Quantity 08 Unit Nos, Custom Bid For Services - 9 1 Supply Marking Cutting Fit Up Welding Fabrication And Erection Of Is 2062 Grb Ismc 175 Box Section Quantity 1750 Unit Kgs, Custom Bid For Services - 9 2 Supply Marking Cutting Fit Up Welding Fabrication And Erection Of Is 2062 Grb Ismc 150 Box Section Quantity 1700 Unit Kgs, Custom Bid For Services - 9 3 Supply Marking Cutting Fit Up Welding Fabrication And Erection Of Is 2062 Grb Ismc 300 Box Section Quantity 1600 Unit Kgs, Custom Bid For Services - 9 4 Supply Marking Cutting Drilling Fit Up Welding Fabrication And Fixing Of Is 2062 Grb16 Thick Carbon Plate Supports And Embedded Parts Quantity 1500 Unit Kgs, Custom Bid For Services - 9 5 Supply Marking Cutting Drilling Fit Up Welding Fabrication And Fixing Of Is 2062 Grb12 Thick Carbon Plate Supports And Embeeded Parts Quantity 300 Unit Kgs, Custom Bid For Services - 9 6 Supply Marking Cutting Drilling Fit Up Welding Fabrication And Fixing Of Sa 387 Gr22 Cl2 12Thick Plate Pipe Bottom Supports Quantity 1000 Unit Kgs, Custom Bid For Services - 9 7 Taking From Cmm Stores Handling Marking Cutting Fit Up Welding Fabrication And Erection Of Various Sizes Of Is 2062 Grb Ismc Box Section Quantity 4300 Unit Kgs, Custom Bid For Services - 10 1 Anchor Fasteners Fixing Fischer M12 Fhii B Gvz Or Equivalent And Fischer M16 Fazii B Gvz Or Equivalent Quantity 304 Unit Nos, Custom Bid For Services - 11 1 Supply Installation And Setting Of Variable Spring Supports Od 559 Pipe Vsh01 Quantity 01 Unit Nos, Custom Bid For Services - 11 2 Supply Installation And Setting Of Variable Spring Supports Od 559 Pipe Vsh02 Quantity 01 Unit Nos, Custom Bid For Services - 11 3 Supply Installation And Setting Of Variable Spring Supports Od 559 Pipe Vsh03 Quantity 01 Unit Nos, Custom Bid For Services - 12 1 Radiography For Pipe Joints As Per Specification Quantity 768 Unit Inch Dia, Custom Bid For Services - 13 Cutting Modification Refabrication And Reerection Of Existing Steel Structures And Ducts And Approach Steel Platforms Quantity 4000 Unit Kgs, Custom Bid For Services - 14 Hydro Test For Pipe Lines After Completion Of All Connections As Per Tender Specification Quantity 01 Lumpsum, Custom Bid For Services - 15 1 Supply And Fixing Of Mineral Wool Insulation With Aluminium Cladding Sheet Wire Mesh Net As Per The Technical Specifications 75Mm Thk For 75 Sqm 25 Mm Thk For 45 Sqm 75Mm Thk 75 Sqm 25Mm Thk 45 Sqm Quantity 120 Unit..
Supply Of Spacer-Upper Rad. Brg. As Per Drg. 26110000558/05 With Matl As Per Specn Aa10119/15, Keeper Ringhy-101.15 As Per Drg. 36016200212/01 With Matl As Per Specn. Aa10108/11, Exp.Jt.Spacer St.1 Hy-101.35 - As Per Drg. 46116200825/02 With Matl. Specn. Is 2062 Gr.B., Support Plate Hy-702.23 - Fully M/Cd Item As Per Drg. 46100090168/01 With Matl As Per Specn. Aa10119/15, Journal Head Stop Plate As Per Drg. 46100402187/01 With Matl. As Per Specn. Aa10119/15, Journal Head Insert Holder As Per Drg. 36100402327/02 With Matl As Per Specn. Aa10119/15., Oil Pump Keeper Hy-170 - Fully M/Cd Item As Per Drg. 46117600002/01 With Matl As Per Specn. Aa10119/15, Spacer - Lip Seal Hy-356.02 - Fully M/Cd Item As Per Drg. 36110000519/03 With Matl As Per Specn. Aa10119/15, Keeper Ring Hy-356.03 - Fully M/Cd Item As Per Drg. 2-61-100-00592/03 With Matl. As Per Specn. Aa10119/15, Key-Bull Ring Stop Hy-339.10 - As Per Drg. 3-61-100-00542/03 With Matl. As Per Specn. Aa10119/13, Dust Guard Fixing Ring Hy-101.A.16 - Fully M/Cd Item As Per Drg. 36116201001/00 With Matl. As Per Specn. Aa10119/14, Retaining Ring Hy-101.A.20 - Fully M/Cd Item As Per Drg. 46116200999/00 With Matl As Per Specn. Aa10119/14, Spacer Lip Seal Hy-101.17 - As Per Drg. 36016200211/02 With Matl As Per Specn. Aa10119/15, Deflector Link Rod Assly Var-01 Hy-021.02 As Per Drg. 36138090149/02 With Matl. As Per Drg., Fully M/Cd Thrust Plate Free End Hy-1102.08 - As Per Drg. 46100402189/00 With Matl. Aa10119/15Bhel Hyd Matl. Code 46100402189-00, Spring Stud Lock Nut Hy-183.B.03.04 As Per Drg. 36138002440/00 With Matl As Per Specn. Aa10208/07, Jr. Stop Bolt Hy-005.01 - Fully M/Cd Item As Per Drg. 36137600079/04 With Matl As Per Specn. Aa10208/07, Brg. Guard L Nut Hy-040.00 - Fully M/Cd Item As Per Drg. 36137600081/01 With Matl As Per Specn. Aa10119/15, Gear Hub Key Hy-121.0 -- Fully M/Cd Key As Per Drg. 3-60-160-00022/01 With Matl. As Per Specn. Aa10305/08 Or En-9, Jr. Bearing Spacer Hy-311.A.15 Fully M/Cd Item As Per Drg. 36100000437/02 With Matl. Aa19331/11 Or Sa106 Gr.B As Mentioned On The Drg
Supply of Modified Foot Step Assembly Rh And Lh With Foot Plates Assembly For Wag9 Locos. Drg No. C/El S/Lgd/B.F/2/45/Alt.-3. Set Consists Of 8 Items. 1 Foot Step Rh Assembly 01 No. 2 Foot Step Lh Assembly 01 No. 3 Foot Plate Assembly 02 No. 4 Support Bit 06 Nos. 5 Support Bit 08 Nos. 6 Hex. Head Bolt M16x35 14 Nos 7 Flat Washer 14 Nos. 8 Spring Washer 14 Nos. Warranty Period: 30 Months After The Date Of Delivery
Supply of Circular Lifting Magnet For Lifting Cold As Well As Hot Material Up To 600Deg C In Foundry Environment . Deep Field Coil Design, Copper Wound For 220V Dc Operation, Must Include 03 Leg Chain And Bail Assembly, Ext Ernal Electrical Connectors And Surge Suppressor, Heavy Duty Cast Magnet Designed For Severe Scrap Handling D Uty Similar To Ohio Make Model 66Dcwx, Confirming To The Following Specification For Single Magnet Characteri Stics- 1. Cold Current - 105 Amps Max. 2. Cold Power- 18.5 Kw 3. Self-Weight Should Not Be More Than 5Ton In Clusive Of Chain, Bail And Other Accessories 4. Duty Cycle: Min. 50%, 24 Hrs./ Day 7 Days/ Week, To Allow Extra Ha Ndling Time Of Hot Materials At 10Minutes Lift Cycle 5. Diameter Of Magnet: 66Inches -1 Inch +3Inch 1650Mm -25. 5Mm/+50Mm 6. Lifting Capacities Shall Not Be Less Than A Pig Iron: H M S - 5200 Lbs. 2359Kgs B Broken/Cu T Scrap: 2700 - 3300 Lbs. 1225-1497Kgs C Steel Turnings: 1700 Lbs. 771Kgs Note: The Tolerance In Lifting C Apacity Must Be +/-25% Of The Above Mentioned Ranges At All Operating Conditions. 7. Magnet Conductor Shall Be Of Premium Electrical Grade Copper With 99.99% Purity With Class H Insulation For Maximum Coil Life Under Severe Operation. 8. Magnet Shall Be Of High Grade Cast Steel Welded Construction For Strength And Waterproof. 9. Heavy Duty, Nonmagnetic Bottom Plate & Sealing Plate, Made Of Wear Resistant & Work Hardened Manganese Steel Shall Be Used To Protect The Coil From Damage Caused By Impact Including Bumping Plate. 10. Additional Protection From Moisture & Impact Is To Be Provided To The Coil With The Use Of Non-Magnetic Manganese Sealing Plate.11. Heavy Duty, Annealed Alloy Steel 3-Legged Chain With A Master Hook Bail Is To Be Provided.12. Suspension Lugs Should Be Heavy-Duty & Pins Shall Be Provided To Connect The Chain To The Magnet. 13. Suitable Rating Surge Suppresser Me Tro Cell Shall Be Introduced In The Magnet. 14. Electrical Connectors: - Plug-In Type Connectors Made From A Size Of 25 Sq. Mm 2 - Conductor Type W Magnet Cable, 2000V Dc Rated For Durability And Ease Of Replacement. 15. E Xternal Connectors To Be Clamped And Protected With A Shield. 16. 08 Hrs. Heat Rise To Be Performed To Verify Mag Net Integrity. Temperature Rise Test, High Voltage Test And Insulation Resistance Test Should Be Performed And Reco Rded For Traceability And Future Reference. Note: 1. Magnet Must Be Same Or Similar In All Respects To The 66 Inch 1676 Mm Dcwx Model, Ohio Make Magnets. 2. All Relevant Tests And Test Certificates Shall Be Submitted Alon G With The Supply. 3. The Manufacturer Shall Carry Out Continuous Load Test. 4. Warranty: 24 Month From The Date Of Commissioning And Proving Out Of M&P. 5. Stage Inspection By Tpi Before Closing The Magnet And Inspection R Eport To Be Submitted By The Firm To Rwp/Bela With The Supply. 6. Tenderer Shall Indicate The Service Support Avail Ability. Stage Inspection By Tpi Before Closing The Magnet As 100% Of Po Qty. Warranty Period: 24 Months After The Date Of Delivery
Supply Of Electronic Components - Dpd Pe 175 0030 Heatsink Left, Dpd Pe 175 0049 Front Plate, Dpd Pe 175 0034 Heatsink Rhs, Dpd Pe 175 0053 Rear Plate, Dpd Pe 175 0052 Bottom Plate, Dpd Pe 175 0035 Bottom Mouting Plate, Dpd Pe 175 0051 Top Plate, Dpd Pe 175 0068 Fan Mount Connector, Dpd Pe 175 0067 Fan Mount Rhs, Dpd Pe 175 0067 Fan Mount Lhs, Dpd Pe 175 0059 Lock Bar, Dpd Pe 175 0031 Side Cover, Dpd Pe 175 0064 Mouting Spacer Rhs Pcb Module, Dpd Pe 175 0036 Mounting Spacer For Filter Module, Dpd Pe 175 0039 Additional Bracket Lhs, Dpd Pe 175 0039 Additional Bracket, Dpd Pe 175 0038 Insulator Plate, Dpd Pe 175 0054 Enclosure Bottom For Filter, Dpd Pe 175 0057 Hv Choke Hs, Dpd Pe 175 0055 Enclosure Middle For Filter, Dpd Pe 175 0037 Mouting Spacer Lhs Pcb Module, Dpd Pe 175 0041 Bottom Bkt Pcb Module, Dpd Pe 175 0048 Backplane Stiffener, Dpd Pe 175 0043 Pcb Support Rhs, Dpd Pe 175 0042 Pcb Support Lhs, Dpd Pe 175 0018 Control Pcb Stiffener, Dpd Pe 175 0046 Filter Plate, Dpd Pe 175 0069 Pic Interface Dc Dc Constiffener, Dpd Pe 175 0065 Psfb Pic Interface Stiffener, Dpd Pe 175 0066 Chb Pic Interface Stiffener, Dpd Pe 175 0060 Parallel Locking Clamp, Dpd Pe 175 0050 Handle, Dpd Pe 175 0020 Guide Pin, Dpd Pe 175 0032 Spacer Power To Interface, Dpd Pe 175 0033 Spacer Interface To Gd, Dpd Pe 175 0058 Output Way Guide, Dpd Pe 175 0062 Chb Diode Spacer, Dpd Pe 175 0063 Spacer Power To Interface M, Dpd Pe 175 0025 Fan Mount
Supply Of Yoke Support Plate For Bvcm Wagon To Rdso Drg. No. Wd-15009-S-05, Alt.-5, Item-6. Warrant Y Period: 30 Months After The Date Of Delivery
Supply of Set Of Support Plate For Line Contactor Lh & Rh One Set Consist Of 2 Ite Ms, 02 Nos. 01 Nos. Lh Support Plate & 1 Nos. Rh Support Plate As Per Drg No. Elw/Bsl/ Wam4/3/116.069 Alt-1 Item To Be Procured From Clw Approved Sources Only. Warranty Period: 30 Months After The Date Of Delivery
Supply Of High Tensile Aar H Type Tight Lock Centre Buffer Coupler Head With Transition Screw Coupling, Balance Draft Gear And Its Associated Components For Fitment On Broad Gauge Passenger Coaches Of Indian Railways As Per Rdso.Spe Cn.No. Rdso/2009/Cg-22, Rev -03 One Coupler Set Shall Consists Of The Following - 1. Tig Ht Lock Coupler Head With Transition Screw Coupling And Its Associated Components Qty. 1 No. 2. Balanced Dr Aft Gear With Pivot Pin Qty. 1 No. 3. Supporting Device For Coupler Head With M20 Fasteners Qty. 1 No. 4. Manu Al Uncoupling Device With M12 Fasteners Qty. 1 No. 5. Rear Carrier Plate For Draft Gear With M16 Fasteners Qt Y. 01 No. 6. Front Carrier Plate For Draft Gear With M16 Fasteners Qty. 1 No. Special Condition:- 1. Maintenance Manual In Soft Copy And Hard Copy Shall Be Supplied With Item. 2. Necessary Test Certificates As Per Rdso .Spec N .No. Rdso/2009/ Cg-22 Rev -01 Shall Be Supplied With Item. 3. Rev.03 Or Latest Revision Of Specification Rds O/2011/Cg-03 Referred In Rdso/2009/Cg-22 Rev -01 Shall Be Followed. 4. Tenderer To Submit Rdso Approved Drawings At The Time Of Quoting The Tender. Safety Item. Warranty Period: 84 Months From The Date Of Supply Or 72 Months From The Date Of Fitment, Whichever Is Earlier As Per Specification No. Rdso/2011/Cg-03 Rev.-3. Ma Ke - Escorts Limited Only Warranty Period: 30 Months After The Date Of Delivery
Supply Of Epoxy Items - Trip Indication Panel Base Plate, Resistor & Capacitor Mounting Plate, Relay Panel, Distance Piece, Cable Support Bar, Duct Insu. Cover Plate Lh/Rh, Duct Insu. Cover Plate Top, Etc
Supply Of Aph Seals And Spares - Ib Seal He Cw S, Ib Seal Leaf He Ccw Sh, Ib Seal Ce Cw Sh, Ib Seal Leaf Ce Ccw Sh, Seal Leaf Ce Sh, Seal Tab He Cw Sh, Seal Tab He Ccw Sh, Seal Tab Ce Cw Sh, Seal Tab Ce Cc Sh, Int Hold Strip He Sh, Int Hold Strip Ce Sh, Hold Strip He Ccw Sh, Hold Strip He Cw Sh, Hold Strip Ce Ccw Sh, Hold Strip Ce Cw Sh, Seal Tab, T-Bar Tab Pl, T-Bar Pl, T-Bar 140X130, Ib Dia Seal Hecw Sh, Ib Dia Seal He Ccw Sh, Ib Dia Seal Cecw Sh, Ib Dia Seal Ce Ccw Sh, Bypass Seal He Sh, Threaded Tube, Eccentric Reducer, Sch 80 Pipe, Bw Elbow, Air Seal Supporting, Air Seal For Swivel Pipe, Bypass Seal, Barco Swivel Joint, Nozzle With Pipe Assembly, Guide Trunion Shaft Bolt, Spring For Supportbearing, Static Seal Assy, Axial Plate Static Seal, Ib Hold Strip He Sh, Ib Hold Strip Ce Sh, Ob Hold Strip Ce Sh, Clip, Pin, Bypass Seal Ce Sh, Bypass Seal Hld Str Sh, Rotor Angel, Radial Seal Assembly, Bypass Seal Assembly, Axial Seal Assembly, Cold End Grating Assy, Grating For Cold End Baskets For Aph Soot Blowing System Mtps
Supply of Improved High Tensile Tight Lock Center Buffer Coupler With Aar-H Type Head And Balanced Draft Gear For Fitment On Bg Passenger Coaches Confirming To Rdso Specification No. Rdso/2011/Cg-03 Rev.-3 Co Nsisting Of 6 Items, Sl. No. 1. Tight Lock Coupler Head Aar-H Type With Main Pin. Qty. 1 No., Sl. No. 2. Balance Draft Gear. Qty. 1 No., Sl. No. 3. Supporting Device With Fasteners. Qty. 1 No., Sl. No. 4. Manual Uncoupling Devic E. Qty. 1 No., Sl. No. 5. Base Plate With Fasteners. Qty. 1 No. And Sl. No. 6. Support Plate With Fasteners. Qty. 1 N O. Matl. & Spec. : Rdso/2011/Cg-03 Rev.-3. Warranty Period: 84 Months After The Date Of Delivery
Supply of Set Of Door Latch Assembly For Sb & Hb Doors Of Three Phase Locomotives As Per Ref.No.1 To 7 Of Els/Lgd Drg.No.C/Els/Lgd/B.F/3/42. One Set Consisting Of 1 Base Plate As Per Is:6603. Ref.No. 1 : 01 N O. 2 Lock Plate As Per Is:6603. Ref.No. 2 : 01 No. 3 Support Plate As Per Is:6603. Ref.No. 3 : 01 No. 4 Fixin G Screw As Per Is:1364/1367. Ref.No 4 : 04 Nos. 5 Flat Washer As Per Is:2016. Ref.No. 5 : 04 Nos. 6 Spring Washer As Per Is:3063. Ref.No. 6 : 04 Nos. 7 Hex. Nut As Per Is:1364/1367. Ref.No. 7 : 04 Nos. Warranty Pe Riod: 30 Months After The Date Of Delivery
Supply And Installation Of Conventional Lightning Arrestor At Radar Site Guwahati Airport, 355 Multiple Point Air Terminal - Conventional Lightning Arrestor Frp Supporting Tube-Pole Gi Pipe With Base Plate For Mounting On Concrete Base Down Conductor Copper Strip With Fittings Cpvc Pipe Stainless Steel Guy Wire With Accessories For Supporting Frp And Gi Pole Supply And Complete Installation
Supply of Hex Head Screw M16x55 -10.9 For Base Plate And Support Plates In Faiveley Make Cbc Confi Rming To Specification No. Is:1364, Pt.-2 Note: Makes- Unbrako Or Tvs Or Tuff Warranty Period: 30 Mo Nths After The Date Of Delivery
Supply of Hex Head Screw M16x65 -10.9 For Base Plate And Support Plates In Escorts Make Cbc Co Nfirming To Specification No. Is:1364, Pt.-2 Of Makes: Unbrakoor Tvs Or Tuffordfl. Warra Nty Period: 30 Months After The Date Of Delivery