Supply of Brake Pipe 32 Nb Assembled With Flange, Socket, Hex. Nut Rp 5/4 & Thread Protecting Tube For A-Car To Drg. No. Contr-9405-S/14, Alt.-10, It.-5, 11, 12 & Contr-9405- S/13, Alt.10, It.23 For Retro Fitted Wagon Will Be Seambless To Is:1239 Part-1 Heavy Grade As Per Rdso, S Letter No. Mw/Abp Dt. 22/05/2020 And With Amendment No.8 Of Sept. 2016 Of Rdso, S Spec. No. 04-Abr-02. L 1476
Supply of Set Of Modified Ms Plate For Single Duct Leather Bellow For Wap-7 Loco Traction Motor. One Set Consists Of 3 Items 3 Nos. 1 Modified Ms Plate Bottom As Per Clw Drg. No. 1209.01.418.026 Alt-1, Qty. 01 No. 2 Modified Ms Plate Flange Traction Motor Inlet As Per Clw Drg. No. 1209.01.418.032 Alt-0, Qty. 02 Nos. 3 Modified Ms Plate Top As Per Clw Drg. No. 1209.01.418.031 Alt-1, Qty. 01 No.
Supply of High Tensile Aar H Type Tight Lock Coupler Complete With Transition Screw Coupling & Balanced Draft Gear And All Other Associated Components As Per Rdso Specification Rdso/2009/Cg-22 Rev.01 For Fitment On Bg Passenger Coaches. Note:- In Above Specification Wherever Specification Number Rdso/2011/Cg 03, Rdso/2011/Cg-03 Or Latest, Is Mentioned, It Should Be Read As Rdso/2011/Cg-03 Rev.01.
Supply of Set Of Flange Plate Lhs & Rhs As Per Drawing No. Le11215 Alt A & Le11216 Alt A With Red Oxide Zinc Chromate Primer Coating
Supply of Tee Flange Stainless Steel 25X25x20 Nb For Air Braked Passenger Coaches. Drawing No.:- Rdso/Sk-96074, Alt. 2 Item-1 Specification: - 04-Abr-2019 Rev.-2 Warranty/Guarantee- 30 Month From The Date Of Delivery Or 24 Months From Date Of Commissioning Which Is Earlier.
Supply of Covered Toothed Gear Flexible Coupling For Main Hoist Size- Flange Outer Casting Dia 185Mm, Bush Bore Dia 55Mm, Parallel Key 7Mmx17mmx70mm. Make: - Duplex Or Equivalent.
Supply of Gasket For Air Brake Hose Coupling For Brake Pipe To Rdsos Sk-73547, Item No.4, Alt No.-13, And Rdsos Specn. No. 02-Abr-02, Appendix - F With Amendment No.- 1 Of February 2007 And With Amendment No.4 Of September 2016.
Supply Of Paharpur Make Ammonia Cooling Tower Spares - Complete Fan Assy, 72 Dia Type H-3-6, Complete Drive Shaft Assy., Gear End Yoke/Coupling, Kit Grdr 20T Brg Pin Shaft, Kit Grdr 20T Brg Fan Shaft, Kit Grdr 20T Fan Shaft, Kit Grdr 20T Shim Set, Kit Grdr 20T O-Ring Set, Kit Grdr 20T Gasket, Kit Grdr 20T Bev Gear Set, Kit D/S 6Q - I Nbm Inserts, Motor End Yoke/Coupling, Oil Seal P7-312-3, Sr. 20T Cc-Ii Gearbox Assy
Supply of Safety Clamp For Screw Coupling Drg.No.Jhs/Trs/4/Sk-427 And 428 Is:2062
Supply of Digital Flange Wear Gauge, Range 0-50 Mm, Model Fwg-1 D Or Similar For Measuring Flange Wear And Thickness Of Bg - Wag-9 Locomotive Wheels With Accuracy +/- 0.01 Mm With Calibration Certificate, Warranty Certificate And Working Manual. Resolution: 0.01 Mm, Power: One 1.5 V Button Cell, Measuring Speed: Less Than 1.5 M/S, Working Tempreture: 0 To 45 Degree C, Relative Humidity: Less Than 80%, Make/Brand: Pie /Riftek/Jyoti Enterprises/Ganapathy. The Tool Is Required In Good Quality For Industrial Use With Calibration Certificate Issued By Oem. Oems Master Equipment Must Be Calibrated /Traceable To National Standard/Nabl/Npl Standard.
Supply of 20 Mm Rotating Flange Welded Joint To Rdso W Drg. No. Wd-83062-S-07, Alt.-5 Conforming To Rdso Spec. No. 04-Abr-02, Amendment No.7 Of Feb-2016.
Supply of Outer Bracket Of Operating Handle For Wap-7 Loco As Per Drg.No- A3/2019/Cnb/2695/5037/Coupling.
Supply of Flexible Gear Coupling Modified To Wap Drg.No. 7310 1441 1340. Warranty : The Material Should Be Covered Under Warranty For A Period Of 18 Months From The Date Of Supply Or 12 Months From The Date Of Fitment.Note:1Material Test Certificate For Chemical Composition And Hardness Certificate To Be Enclosed Along With The Supply.2Only Standard Manufacturers Of Flexible Gear Coupling Supplying For Class Iv Heavy Duty Cranes Need To Quote.Proof For The Same Shall Accompany The Offer. Half Gear Coupling To Rwf Drawing No:704010810430 For Eot Cranes In Axle Shop.Note:1Material Test Certificate For Chemical Composition And Hardness Certificate To Be Enclosed Along With The Supply2standard Manufacturers/Suppliers Of Flexible Gear Coupling Supplying For Classiv Heavy Duty Cranes Need To Quote.
Purchase Of Instrument Materials - Pressure Gauge, Bottom Entry Connector, J Type Compensating Cable, U Syphon Connector, U Syphon, Ms Coupling, Cock Valve, Sasta Make Stream Flow Integrator, J-Type 0-600 Deg. C. Thermocouple
Supply of Hydraulic Pressure Gauge Part No.: Plasser Part No. Hy-154-14 Having Glycerin Filled In 100 Mm Dial ½ Bsp Thread Center Adopter 0-600 Bar Pressure With Flange Required For Replace On Bcm, Frm Machines. Part Make: Plasser/Wika/Stauff/Pricol, Qty 10 Nos Axle Cylinder Roller Bearing Part No.: Plasser Part No. 81211 Required For Replace On Bcm, Frm Machines.Part Make: Iko/Koyo/Skf/Fag, Qty 15 Nos.
Supply of V/0/0237 Air Brake Hose- Coupling For Brake Pipe Rdso- Drg.No. Sk-73547, Alt.- 12 P 315/284 R 315/307
Supply of O Ring Of Size Diameter 160 Mm X Thickness 3 Mm For Jumper Plug Assembly For Inter Vehicular Coupler 500 A, 750 V, 3 Phase, 50 Hz For Lhb Type Coaches Confirming To Rdso Specification No. Rdso/Pe/Spec/Ac/0177-2013 Rev.0 With Rcf Drawing No. Lw71301, Alt. A, Item No. 29. Sealing Ring For Coupling Socket Assembly For Inter Vehicular Coupler 500 A, 750 V, 3 Phase, 50 Hz For Lhb Type Coaches Confirming To Rdso Specification No. Rdso/Pe/Spec/Ac/0177-2013 Rev.0 With Rcf Drawing No. Lw71300, Alt. Nil, Item No. 31 Rubber Cleat For Jumper Plug Assembly For Inter Vehicular Coupler 500 A, 750 V, 3 Phase, 50 Hz For Lhb Type Coaches As Per Rdso Specification No. Rdso/Pe/Spec/Ac/0177-2013 Rev.0 With Rcf Drawing No.Lw71374.
Supply of Moving Coil Vibration Proof Ammeter Range 0 - 300 Amps Dc 75 Mv, Fsd 90 Degree Accuracy Class 1.5, Flush Mounting Type, 96 X 96 Square Flange Body 90 X 90 Mm With External Shunt 300 Amps, 75 Mv For Use With The Above Meter Conforming To Is:1248-2003, With Isi Mark. The Meter Shall Be Supplied Along With Calibration Certificate Traceable To Nabl Standard.
Supply of Push Pull Rod Traction Bar For Wap7 / Wag9 As Per Clw Drg.No.1209.01.113.006 Or Latest. Abb Drg.No.Ib.011.00191 Rev.3 Or Latest Consist Of 3 Items 1 Flange Should Be As Per Clw Drg.No.1209.01.113.007 Alt.5 Or Latest Abb Drg.No.Ia001-00381 Or Latest And 2 Tube Welding As Per Clw Drg.No.1209.01.313.008 Alt.2 Or Latest Abb Drg.No.Ib016-00350 Or Latest. 3 Traction Bar Push Pull Rod Flange Hole Size Should Be As Per Rdso Smi.No.Rdso/2006/El/0241 Rev.0 Dated 24.10.06.
Supply of Hose Coupling For Main Compressor Delivery As Per Els/Lgd Drg.No.C/Els/Lgd/Pn.Eqpt./3/32.
