Gem Bids For Hiring Of Agency For Iso Certification Service - Iso 9001 -quality Management System Qms, Iso 14001 -environmental Management System Ems, Iso 45001 -occupational Health & Safety Management System Ohas, Iso 50001 Energy Management System E
Gem Bids For 1000441447, 71.07.20.088.5 - 32-port 40g 100g Spine Switch, 71.07.20.089.5 - 48-port 10g 25g Sfp Leaf Switch, 71.99.10.740.5 - Fabric Controller, 71.09.00.022.5 - 100gbase Qsfp Active Optical Cable, 71.31.48.038.5 - 25gbase Sfp28 Transceiver Lc Mmf, 71.31.48.039.5 - 10gbase Sfp Transceiver Lc Mmf, 71.31.48.040.5 - 1000base-tsfp Transceiver, 71.31.48.041.5 - 1g Sfp Fibre Tran.singlemode2, 71.31.48.042.5 - 1g Sfp Fibre Transceiver Lcmmf, 71.31.49.001.5 - 100gbase-qsfp Optics Module, 71.31.49.002.5 - Module 10gbase-sfp, - Project Service Simple Mentation, - Training And Certification, - Amc Support Charges 2 Nd Year, - Amc Support Charges 3 Rd Year, - Amc Support Charges 4 Th Year, - Amc Support Charges 5 Th Year
Gem Bids For Hiring Of Agency For Iso Certification Service - Iso 9001 -quality Management System Qms, Iso 14001 -environmental Management System Ems; Consulting, Initial Audit, Surveillance Audit, Re-certification Audit;workshop On Awareness Of Iso Certif..
Gem Bids For Hiring Of Agency For Iso Certification Service - Iso 14001 -environmental Management System Ems, As Per Attachedscope Of Work And Terms And Conditions; As Per Attachedscope Of Work And Terms And Conditions; As Per Attachedscope Of Work And Term.. /
Gem Bids For Custom Bid For Services - Re-certification Audit In Iso50001:2018 For Vvsdpl, Custom Bid For Services -awareness Cum Internal Audit Training Program At Vizag Andvijayawada, Custom Bid For Services - Surveillance Audit Ifor Iso 50001:2018, Custom Bid For Services - Surveillanceaudit Ii For Iso 50001:2018 /
Deposit-govt. Poly Technic College Kannur Textile Certification Building -sheet Roofing, Painting And Urgent Renovation Work In Deposit-govt. Poly Technic College Kannur Textile Certification Building -sheet Roofing, Painting And Urgent Renovation Work In Textile Certification Building For Improvement Of Academic Facilities Of Civil Engineering Department-general Civil
Gem bids for Hiring Of Agency For Iso Certification Service - Iso 27001 -Information Security Management System Isms; Re-Certification Audit; As Per Scope Of Work, Hiring Of Agencyfor Iso Certification Service - Iso 27001 - Informationsecurity Management System Isms; Registration Fees Forcertificate Issue; As Per Scope Of Work, Hiring Of Agencyfor Iso Certification Service - Iso 27001 - Informationsecurity Management System Isms; Periodic Audit; As Perscope Of Work /
Gem Bids For Rollerball Pen V3 Q4, Ink Refills V2 Q4, Gel Pen V3q4, Packaging Tape Q4, Register V2 Q4, Tags Forfiles V2 As Per Is 8499 Q4, Stapler Pin / Staples V2q4, Fluid Correction Pen V2 Q4, Eraser Q4, Clips, Paper As Per Is 5650 Q4, Highlighter Pen Q4, Permanent Marker Pen Q4, Desktop Calculator -electronics Q4, Photography Paper V2 Q4, Glue Stickv2 Q4, Black Lead Pencils V2 As Per Is 1375 Q4, Selfadhesive Flags V2 Q4, Plain Copier Paper V3 Isimarked To Is 14490 Q4, Cartridge Drawing Paper As Peris 1848 Part 2 Q4, Dak Pad V2 Q4, Pen Stand V2q4, Markers For White Board V2 Q4, Scissors Q4, Knife Blades Q4, Metric Steel Scales V2 As Per Is 1481q4, Ball Point Pens V2 As Per Is 3705 Q4, Carbonpapers As Per Is 1551 Q4, Stamp Pads Q4, Stamp - Padink As Per Is 393 Q4 . . % % 4 4 /mse Exemption For Years Ofexperience And Turnoverno& % & % . . % % 4 4 /startup Exemption For Years Ofexperience And Turnoverno -- 8 8 9 9 : : ; ; / Minimum Number Ofbids Required To Disable Automatic Bidextension1 ; /bid Number: Gem/2025/b/6607971 /dated: 25-08-2025 & & / Bid Document1 / 47 D D ; ;, , F F -- / / Number Of Days For Which Bidwould Be Auto--extended1 H %h % : : /bid To Ra Enabledyesh %h % I I /ra Quali Cation Rule50% Lowest Priced Technically Qualified Bidders 4 4 /type Of Bidtwo Packet Bid4 4 L L /primary Product Categoryrollerball Pen V3 M M & O & O /time Allowed For Technicalclarifications During Technical Evaluation2 Days p p 8 8 R R p p 4 4 / % % T D T D U U /inspection Required Byempanelled Inspection Authority / Agenciespre-registered With Gemno M M R R /evaluation Methodtotal Value Wise Evaluation V & V & /arbitration Clauseno /mediation Clauseno //bid Details /emd Detail 8 /requiredno /epbg Detail 8 /requiredno /splitting / Bid Splitting Not Applied.reserved For Make In India Productsreserved For Make In India Productsyes /mse Purchase Preference /mse Purchase Preferenceyes2 / 47 . Bid Reserved For Make In India Products: : Procurement Under This Bid Is Reserved For Purchase From Class 1local Supplier As Defined In Public Procurement Preference To Make In India, Order 2017 As Amended From Timeto Time And Its Subsequent Orders/notifications Issued By Concerned Nodal Ministry For Specific Goods/products.however, Eligible Micro And Small Enterprises Will Be Allowed To Participate. The Minimum Local Content Toqualify As A Class 1 Local Supplier Is Denoted In The Bid Document. All Bidders Must Upload A Certificate From Theoem Regarding The Percentage Of The Local Content And The Details Of Locations At Which The Local Value Addition Ismade Along With Their Bid, Failing Which The Bid Is Liable To Be Rejected. In Case The Bid Value Is More Than Rs 10crore, The Declaration Relating To Percentage Of Local Content Shall Be Certified By The Statutory Auditor Or Costauditor, If The Oem Is A Company And By A Practicing Cost Accountant Or A Chartered Accountant For Oems Otherthan Companies As Per The Public Procurement Preference To Make-in -india Order 2017 Dated 04.06.2020 . Incase Buyer Has Selected Purchase Preference To Micro And Small Enterprises Clause In The Bid, The Same Will Getprecedence Over This Clause. 2. Purchase Preference Will Be Given To Mses Having Valid Udyam Registration And Whose Credentials Arevalidated Online Through Udyam Registration Portal As Defined In Public Procurement Policy For Micro And Smallenterprises Mses Order, 2012 Dated 23.03.2012 Issued By Ministry Of Micro, Small And Medium Enterprises Andits Subsequent Orders/notifications Issued By Concerned Ministry. If The Bidder Wants To Avail Themselves Of Thepurchase Preference, The Bidder Must Be The Manufacturer / Oem Of The Offered Product On Gem. Traders Areexcluded From The Purview Of Public Procurement Policy For Micro And Small Enterprises And Hence Resellersoffering Products Manufactured By Some Other Oem Are Not Eligible For Any Purchase Preference. In Respect Of Bidfor Services, The Bidder Must Be The Service Provider Of The Offered Service. Relevant Documentary Evidence Inthis Regard Shall Be Uploaded Along With The Bid In Respect Of The Offered Product Or Service And Buyer Will Decideeligibility For Purchase Preference Based On Documentary Evidence Submitted, While Evaluating The Bid. If L-1 Isnot An Mse And Mse Seller S Has / Have Quoted Price Within L-1+ 15% Selected By Buyer Of Margin Ofpurchase Preference /price Band Defined In Relevant Policy, Such Mse Seller Shall Be Given Opportunity To Matchl-1 Price And Contract Will Be Awarded For 25% Selected By Buyer Percentage Of Total Quantity. The Buyers Areadvised To Refer The Om No. F.1/4/2021-ppd Dated 18.05.2023 Om No.1 4 2021 Ppd Dated 18.05.2023 Forcompliance Of Concurrent Application Of Public Procurement Policy For Micro And Small Enterprises Order, 2012and Public Procurement Preference To Make In India Order, 2017. Benefits Of Mse Will Be Allowed Only If Seller Isvalidated On-line In Gem Profile As Well As Validated And Approved By Buyer After Evaluation Of Documentssubmitted. 3. Short Duration Bid Has Been Published By The Buyer With The Approval Of The Competent Authority Due Toemergency Procurement Of Critical Products/services. 4. Reverse Auction Would Be Conducted Amongst First 50% Of The Technically Qualified Bidders Arranged In Theorder Of Prices From Lowest To Highest. Number Of Sellers Eligible For Participating In Ra Would Be Rounded Off Tonext Higher Integer Value If Number Of Technically Qualified Bidders Is Odd E.g. If 7 Bids Are Technically Qualified, Then Ra Will Be Conducted Amongst L-1 To L-4. In Case Number Of Technically Qualified Bidders Are 2 Or 3, Ra Willbe Between All Without Any Elimination. If Buyer Has Chosen To Split The Bid Amongst N Sellers, Then Minimum Nsellers Would Be Taken To Ra Round. In Case Primary Products Of Only One Oem Are Left In Contention Forparticipation In Ra Based On Lowest 50% Bidders Qualifying For Ra, The Number Of Sellers Qualifying For Ra Wouldbe Increased To Get At Least Products Of One More Oem Directly Participated Or Through Its Reseller If Available.further, If Bids Of Any Sellers Eligible For Mse Preference Is / Are Coming Within Price Band Of 15% Of Non Msel-1 Or If Bid Of Any Sellers Eligible For Make In India Preference Is / Are Coming Within Price Band Of 20% Of Nonmii L-1, Then Such Mse / Make In India Seller Shall Also Be Allowed To Participate In The Ra Process.rollerball Pen V3 10 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgenericclosure Typecapped Rollerball Penbody Materialplastictip Size/line Width0.7 Mmink Colourblue3 / 47 Re-fillable Rollerball Pennodimensionslength Of The Pen In Mm100 Mm To 120 Mm, 121 Mm To 140 Mmdiameter Of The Pen Inmm8 Mm To 10 Mmnet Weight Of The Pen Ingm10 Gm To 30 Gm /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesadditional Specification Parameters - Rollerball Pen V3 10 Pieces Specification Parameternamebid Requirement Allowed Valuespilot V7 Blue Pen Isacceptable.pilot V7 Blue Pen Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad1015rollerball Pen V3 5 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgenericclosure Typeretractable Rollerball Pen, Capped Rollerball Penbody Materialplastic, Metaltip Size/line Width0.5 Mmink Colourblack, Bluere-fillable Rollerball Penyesdimensionslength Of The Pen In Mm100 Mm To 120 Mm, 121 Mm To 140 Mm, 141 Mm To160 Mm4 / 47 Diameter Of The Pen Inmm8 Mm To 10 Mm, 11 Mm To 13 Mmnet Weight Of The Pen Ingm10 Gm To 30 Gm, 30.1 Gm To 50 Gm, 50.1 Gm To 70gm /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesadditional Specification Parameters - Rollerball Pen V3 5 Pieces Specification Parameternamebid Requirement Allowed Valuespilot V5 Black Pen Isacceptable.pilot V5 Black Pen Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad515rollerball Pen V3 5 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgenericclosure Typeretractable Rollerball Pen, Capped Rollerball Penbody Materialplastic, Metaltip Size/line Width0.5 Mmink Colourgreenre-fillable Rollerball Penno, Yesdimensionslength Of The Pen In Mm100 Mm To 120 Mm, 121 Mm To 140 Mm, 141 Mm To160 Mmdiameter Of The Pen Inmm8 Mm To 10 Mm, 11 Mm To 13 Mmnet Weight Of The Pen Ingm10 Gm To 30 Gm, 30.1 Gm To 50 Gm, 50.1 Gm To 70gm5 / 47 Additional Specification Parameters - Rollerball Pen V3 5 Pieces Specification Parameternamebid Requirement Allowed Valuespilot V5 Green Pen Isacceptable.pilot V5 Green Pen Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad515ink Refills V2 50 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgenerictype Of Ink Refillgel Pen Ink Refill, Sparkel Pen Ink Refill, Roller Ball Penink Refill, Fineliner Refillrefill Ink Colourblueink Typeoil Based Ink, Water Based Ink, Water Based With Gelpigmented Ink, Shimmering Ink, Water Based Withglitter Pigmented Inkrefill Tip Sizein Mm0.5 Mmrefill Body Materialplasticshelf Lifeshelf Life Of Pen Refill Inyears1 Year, 2 Year, 3 Year, 4 Year, 5 Year, 6 Yearadditional Specification Parameters - Ink Refills V2 50 Pieces 6 / 47 Specification Parameternamebid Requirement Allowed Valuesgel Pen Add Gel Achiverblue Pen Refills Isacceptable.gel Pen Add Gel Achiver Blue Pen Refills Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad5015gel Pen V3 20 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgenericdesign Of The Gel Penretractable, Capped, Twist, Magneticbody Material Of The Gelpenplasticrefillable Typeyes, Nodiameter Of The Pen Tip Inmm0.5 Mm, 0.6 Mm, 0.7 Mm, 0.8 Mm, 0.9 Mm, 1.0 Mmcolour Of The Inkblack, Blue, Green, Redadditional Specification Parameters - Gel Pen V3 20 Pieces Specification Parameternamebid Requirement Allowed Valuesgel Pen Add Gel Achiverblue Is Acceptable.gel Pen Add Gel Achiver Blue Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity7 / 47 :. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad2015packaging Tape 50 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesmaterialmaterial Of Filmbiaxially Oriented Polypropylene Bopp, Bopp Andself Adhesive Tapedimensionlength Of Tape On A Rollmeter65, 5, 15, 25, 40, 50, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, 1000width Of Tape On A Roll Mm48, 24thickness Of Film Inmicron23inner Diameter Of Coremm25, 50, 75colourcolour Of Tapetransparentadditional Specification Parameters - Packaging Tape 50 Pieces Specification Parameternamebid Requirement Allowed Valuestransparent Tape 1 100mtr Length Is Acceptable.transparent Tape 1 100 Mtr Length Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad5015packaging Tape 50 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier8 / 47 o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesmaterialmaterial Of Filmbiaxially Oriented Polypropylene Bopp, Bopp Andself Adhesive Tapedimensionlength Of Tape On A Rollmeter80, 100, 125, 150width Of Tape On A Roll Mm48, 60, 72thickness Of Film Inmicron25, 23, 29, 50inner Diameter Of Coremm25, 50, 75colourcolour Of Tapetransparentadditional Specification Parameters - Packaging Tape 50 Pieces Specification Parameternamebid Requirement Allowed Valuestransparent Tape 2 100mtr Length Is Acceptable.transparent Tape 2 100 Mtr Length Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad5015packaging Tape 50 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesmaterialmaterial Of Filmbiaxially Oriented Polypropylene Bopp, Bopp Andself Adhesive Tape9 / 47 Dimensionlength Of Tape On A Rollmeter80, 100, 125, 150width Of Tape On A Roll Mm48, 60thickness Of Film Inmicron25, 23, 29, 50inner Diameter Of Coremm25, 50, 75colourcolour Of Tapebrown, Transparent, As Per Buyer S Requirement To Beindicated By The Buyer During Bid Creation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesadditional Specification Parameters - Packaging Tape 50 Pieces Specification Parameternamebid Requirement Allowed Valuespackaging Tape 2 Browncolor 100 Mtr Length Isacceptable.packaging Tape 2 Brown Color 100 Mtr Length Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad5015register V2 50 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementproduct Typeregisterregister Typeacknowledgement Peon Book, Attendance Register, Service Book Register, Dispatch Register, Pay Billregister, Cash Book Register, Stock Register, Gateregister, Accession Register, Minute Register, Logbook, Ledger Book, Contingent Register, Opdregister, Medical Bill Register10 / 47 Inner Paper Specificationconfirming As Per Is 1848part 1account Book Paper, Azure Laid Paper, Bond Paper, Cream Laid And Cream Wove/printing White/printingcoloured/printing Offset Paper, Printing Maplithopaperpaper Colourwhitenumber Of Pages Excludingcover41-60, 61-80, 81-100, 101-120, 121-150, 151-200, 201-250, 251-300, 301-350, 351-400binding Of Registerhardcover Binding, Cloth Bindinggrammage Anddimensiongrammage Substance Ofpaper In Gsm60, 75, 90minimum Length Of Registerin Mm148, 176, 210, 250, 297, 420 Millimeterminimum Width Of Registerin Mm148, 176, 210, 250, 297, 420 Millimetergrammage Substance Ofcover Board In Gsm110, 130, 150, 175, 200, 225, 275, 325 /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesadditional Specification Parameters - Register V2 50 Pieces Specification Parameternamebid Requirement Allowed Valueslong Size Hardcover Clothbinding 200 Pages Isacceptable.long Size Hardcover Cloth Binding 200 Pages Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad5015register V2 50 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation11 / 47 /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementproduct Typeregisterregister Typeacknowledgement Peon Book, Attendance Register, Service Book Register, Dispatch Register, Pay Billregister, Cash Book Register, Stock Register, Gateregister, Accession Register, Minute Register, Logbook, Ledger Book, Contingent Register, Opdregister, Medical Bill Registerinner Paper Specificationconfirming As Per Is 1848part 1account Book Paper, Azure Laid Paper, Bond Paper, Cream Laid And Cream Wove/printing White/printingcoloured/printing Offset Paper, Printing Maplithopapernumber Of Pages Excludingcover41-60, 61-80, 81-100, 101-120, 121-150, 151-200, 201-250, 251-300, 301-350, 351-400binding Of Registersoftcover Binding, Hardcover Binding, Saddlestitching/stapple Binding, Sewn Binding, Clothbindinggrammage Anddimensiongrammage Substance Ofpaper In Gsm60, 75, 90minimum Length Of Registerin Mm148, 176, 210, 250, 297, 420 Millimeterminimum Width Of Registerin Mm148, 176, 210, 250, 297, 420 Millimetergrammage Substance Ofcover Board In Gsm110, 130, 150, 175, 200, 225, 275, 325additional Specification Parameters - Register V2 50 Pieces Specification Parameternamebid Requirement Allowed Valueslong Size Hardcover Clothbinding 300 Pages Isacceptable.long Size Hardcover Cloth Binding 300 Pages Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad5015register V2 50 Pieces 12 / 47 Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementproduct Typeregisterregister Typeacknowledgement Peon Book, Attendance Register, Service Book Register, Dispatch Register, Pay Billregister, Cash Book Register, Stock Register, Gateregister, Accession Register, Minute Register, Logbook, Ledger Book, Contingent Register, Opdregister, Medical Bill Registerinner Paper Specificationconfirming As Per Is 1848part 1account Book Paper, Azure Laid Paper, Bond Paper, Cream Laid And Cream Wove/printing White/printingcoloured/printing Offset Paper, Printing Maplithopapernumber Of Pages Excludingcover41-60, 61-80, 81-100, 101-120, 121-150, 151-200, 201-250, 251-300, 301-350, 351-400binding Of Registersoftcover Binding, Hardcover Binding, Saddlestitching/stapple Binding, Sewn Binding, Clothbindinggrammage Anddimensiongrammage Substance Ofpaper In Gsm60, 75, 90minimum Length Of Registerin Mm148, 176, 210, 250, 297, 420 Millimeterminimum Width Of Registerin Mm148, 176, 210, 250, 297, 420 Millimetergrammage Substance Ofcover Board In Gsm110, 130, 150, 175, 200, 225, 275, 325additional Specification Parameters - Register V2 50 Pieces Specification Parameternamebid Requirement Allowed Valueslong Size Hardcover Clothbinding 400 Pages Isacceptable.long Size Hardcover Cloth Binding 400 Pages Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity13 / 47 :. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad5015register V2 50 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementproduct Typeregisterregister Typeacknowledgement Peon Book, Attendance Register, Service Book Register, Dispatch Register, Pay Billregister, Cash Book Register, Stock Register, Gateregister, Accession Register, Minute Register, Logbook, Ledger Book, Contingent Register, Opdregister, Medical Bill Registerinner Paper Specificationconfirming As Per Is 1848part 1account Book Paper, Azure Laid Paper, Bond Paper, Cream Laid And Cream Wove/printing White/printingcoloured/printing Offset Paper, Printing Maplithopapernumber Of Pages Excludingcover41-60, 61-80, 81-100, 101-120, 121-150, 151-200, 201-250, 251-300, 301-350, 351-400binding Of Registersoftcover Binding, Hardcover Binding, Saddlestitching/stapple Binding, Sewn Binding, Clothbindinggrammage Anddimensiongrammage Substance Ofpaper In Gsm60, 75, 90minimum Length Of Registerin Mm148, 176, 210, 250, 297, 420 Millimeterminimum Width Of Registerin Mm148, 176, 210, 250, 297, 420 Millimetergrammage Substance Ofcover Board In Gsm110, 130, 150, 175, 200, 225, 275, 325additional Specification Parameters - Register V2 50 Pieces 14 / 47 Specification Parameternamebid Requirement Allowed Valueslong Size Hardcover Clothbinding 500 Pages Isacceptable.long Size Hardcover Cloth Binding 500 Pages Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad5015tags For Files V2 As Per Is 8499 50 Packet Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgoverningspecificationgoverning Specificationconforming To Is 8499isi Markingyes, Nomanufactureyarn Treatment In Lacebleached Cotton Yarn, Unbleached Cotton Yarndimensionoverall Length Of The Laceportion125 Mm, 175 Mmadditional Specification Parameters - Tags For Files V2 As Per Is 8499 50 Packet Specification Parameternamebid Requirement Allowed Valuescotton Tags For File Goodquality 50 Pkts Isacceptable.cotton Tags For File Good Quality 50 Pkts Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity15 / 47 :. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad5015tags For Files V2 As Per Is 8499 100 Packet Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgoverningspecificationgoverning Specificationconforming To Is 8499isi Markingyes, Nomanufactureyarn Treatment In Lacebleached Cotton Yarn, Unbleached Cotton Yarndimensionoverall Length Of The Laceportion125 Mm, 175 Mmadditional Specification Parameters - Tags For Files V2 As Per Is 8499 100 Packet Specification Parameternamebid Requirement Allowed Valuescotton Lace For File Goodquality 100 Pkts Isacceptable.cotton Lace For File Good Quality 100 Pkts Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad10015stapler Pin / Staples V2 20 Box Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation16 / 47 /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementsize Number10/4, 24/6finishcoating On Staplerpin/staplestinned Coating, Galvanized Coating, Copper Coatingadditional Specification Parameters - Stapler Pin / Staples V2 20 Box Specification Parameternamebid Requirement Allowed Valueskangaro Stapler Pin 10 Nois Acceptable.kangaro Stapler Pin 10 No Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad2015fluid Correction Pen V2 10 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementpen Contains Correctionfluid7 Ml, 8 Ml, 12 Mlline/pen Tip Size0.5 Mm, 0.6 Mm, 0.7 Mm, 0.8 Mmtesting Andcertification Correction Fluid Is Bismarkedyes, Noavailability Of Test Reportof Correction Fluid Fromdesignated Ahsp / Nabl /ilac Accredited Or Centralgovernment Lab To Provethe Conformity Of Productsto The Specificationyes, No17 / 47 Additional Specification Parameters - Fluid Correction Pen V2 10 Pieces Specification Parameternamebid Requirement Allowed Valuescamlin 15 Ml Whitener Isacceptable.camlin 15 Ml Whitener Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad1015eraser 50 Packet Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesother Propertiesnumber Of Eraser Per Packnos20additional Specification Parameters - Eraser 50 Packet Specification Parameternamebid Requirement Allowed Valuesdoms Eraser 20 Pkt Isacceptable.doms Eraser 20 Pkt Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad501518 / 47 Clips, Paper As Per Is 5650 50 Box Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgoverningspecificationbis Markingyes, Nocharacteristicsshapes Of Clipsstandard Shape, Streamline Shape, Triangular Shapesize Of Clipssmall, Largeadditional Specification Parameters - Clips, Paper As Per Is 5650 50 Box Specification Parameternamebid Requirement Allowed Valuesoddy Paper Clip/ U Clip 50pkt Is Acceptable.oddy Paper Clip/ U Clip 50 Pkt Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad5015highlighter Pen 10 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementtype Of Penpermanent Highlighter Penink Colouryellow, Pink, Green, Red, Black, Bluethe Shape Of The Pen Tipchisel Pointline Width1.0 Mm, 1.5 Mm, 2.0 Mm, 2.5 Mm, 3.0 Mm, 3.5 Mm, 4.0 Mm, 4.5 Mm, 5.0 Mm19 / 47 Materialpen Body Made Ofplasticwriting Tip Made Up Ofhydrocarbon Tipmarking Andpackingmarking On The Penbarrel/capmanufacturer Name Or Initials Or Registered Trademarketc., As Per Buyer S Requirement To Be Indicatedduring Bid Creationpacking Of Each Penpaper Poly Pouch, Cardboard Boxtesting Andcertificationavailability Of Test Reportfrom Designated Ahsp /nabl / Ilac Accredited Orcentral Government Lab Toprove The Conformity Ofproducts To Thespecificationyes, Notest Reports To Be Furnishedto The Buyer On Demand, Ifclaimed To Be Availableyes, N.a /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesadditional Specification Parameters - Highlighter Pen 10 Pieces Specification Parameternamebid Requirement Allowed Valuesbranded Highlighter Pen 10pkt Is Acceptable.branded Highlighter Pen 10 Pkt Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad1015permanent Marker Pen 10 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation20 / 47 /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementtype Of Inkflorescent Water Based, Alcohol Basedink Colouryellow, Pink, Green, Red, Black, Bluethe Shape Of The Marker/pen Tipbullet Shape, Chisel Shapeline Width1.0 Mm, 1.5 Mm, 2.0 Mm, 2.5 Mm, 3.0 Mm, 3.5 Mm, 4.0 Mm, 4.5 Mm, 5.0 Mmheat Resistant Inkyes, Noagree To Provide Advancesamples For Buyer Sapproval Beforecommencement Of Supplyapplicable In Case Oforders Placed Against Bidand Not Applicable In Caseof Direct Buyingyes, No, Not Applicablematerialmarker /pen Body Made Ofplastic, Metalwriting Tip Made Up Ofhydrocarbon Tip, Hard Acrylic Tip, Hard Polyester Tipmarking Andpackingmarking On The Marker /penbarrel/capmanufacturer Name Or Initials Or Registered Trademarketc., As Per Buyer S Requirement To Be Indicatedduring Bid Creationpacking Of Each Marker/penpaper Poly Pouch, Cardboard Boxtesting Andcertificationavailability Of Test Reportfrom Designated Ahsp /nabl / Ilac Accredited Orcentral Government Lab Toprove The Conformity Ofproducts To Thespecificationyes, Notest Reports To Be Furnishedto The Buyer On Demand, Ifclaimed To Be Availableyes, Not Applicableadditional Specification Parameters - Permanent Marker Pen 10 Pieces Specification Parameternamebid Requirement Allowed Valuescamlin Permanent Markerpen 10 Nos Is Acceptable.camlin Permanent Marker Pen 10 Nos Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity21 / 47 :. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad1015desktop Calculator - Electronics 10 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuestypetype Of Displaylcd, Leddetails Of Digitno. Of Digits Min Nos12, 12physicalcharacteristicspower Sourcebattery And Solar Dual, Battery Onlyadditional Specification Parameters - Desktop Calculator - Electronics 10 Pieces Specification Parameternamebid Requirement Allowed Valuesoreva 1412 12 Digitcalculator Is Acceptable.oreva 1412 12 Digit Calculator Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad1015photography Paper V2 5 Packet Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation22 / 47 /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementwaterproofyes, Nogrammage Substance Ofpaper200 Gsmsize Of Paper As Per Is613989 X 140 Mm, 120 X 165 Mm, 130 X 180 Mm, 165 X216 Mm, 180 X 240 Mm, 203 X 254 Mm, 240 X 350mm, 254 X 308 Mm, 300 X 400 Mm, 305 X 381 Mm, 400 X 500 Mm, 406 X 508 Mm, 500 X 600 Mmpackagingnumber Of Sheets Inpackage As Per Is 176310 Sheets, 25 Sheets, 50 Sheets, 100 Sheets, 250sheets, 500 Sheetsfinishsurface Finishglossy, Stain, Matttesting Andcertificationavailability Of Test Reportfrom Ahsp/nabl/ilacaccredited Or Centralgovernment Lab To Proveconformity Of Products Tothe Specificationyes, Noadditional Specification Parameters - Photography Paper V2 5 Packet Specification Parameternamebid Requirement Allowed Valuesglossy Photography Paper180 Gms Is Acceptable.glossy Photography Paper 180 Gms Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad515glue Stick V2 30 Set Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuespackingno Of Sticks In A Setset Of 423 / 47 Net Content Andshelf Lifenet Content Of The Stickgrams25, 35, 40, 50 Or Highershelf Life Months12, 24, 36, 48 /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesadditional Specification Parameters - Glue Stick V2 30 Set Specification Parameternamebid Requirement Allowed Valuesglue Stick 15 Grams Isacceptable.glue Stick 15 Grams Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad3015black Lead Pencils V2 As Per Is 1375 25 Packet Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgoverningspecificationgoverning Specificationconforming To Is 1375isi Markingyes, Nostandardspencil Typedrawing Pencil, Carpenter S Pencil, Stenographer Sand Reporter S Pencil, General Writing Pencilpencil Grades6b, 5b, 4b, 3b, 2b, B, Hb, H, 2h, 3h, 4h, 5h, 6hpencil Shapesoval, Round, Hexagonaladditional Specification Parameters - Black Lead Pencils V2 As Per Is 1375 25 Packet 24 / 47 Specification Parameternamebid Requirement Allowed Valuesnatraj Pencil Qty 25 Pkt Isacceptable.natraj Pencil Qty 25 Pkt Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad2515self Adhesive Flags V2 20 Pads Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementflag Colourpink, Blue, Green, Orange, White, Yellow, Purple, Safron, Violetglued Portion Of Flaglengthwise15 Mmmaterialpaper Grammage G Persquare Metre70, 75, 80, 85, 90dimensionflag Size 0decimal5 Mmunit-mm50 X 76 Mmpackingnumber Of Sheets Of Eachcolour In A Pad100 Sheetsadditional Specification Parameters - Self Adhesive Flags V2 20 Pads Specification Parameternamebid Requirement Allowed Valuesself Adhesive Paper Noteyellow Color Is Required.self Adhesive Paper Note Yellow Color Is Required.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity25 / 47 :. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad2015self Adhesive Flags V2 25 Pads Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementflag Colourpink, Blue, Green, Orange, White, Yellow, Purple, Safron, Violetglued Portion Of Flaglengthwise12 Mm, 15 Mmmaterialpaper Grammage G Persquare Metre70, 75, 80, 85, 90dimensionflag Size 0decimal5 Mmunit-mm15 X 76 Mmpackingnumber Of Sheets Of Eachcolour In A Pad40 Sheets, 50 Sheets, 80 Sheets, 100 Sheetsadditional Specification Parameters - Self Adhesive Flags V2 25 Pads Specification Parameternamebid Requirement Allowed Valuesoddy Self Adhesive Paperflag Tricolor Is Required.oddy Self Adhesive Paper Flag Tricolor Is Required.oddy Self Adhesive Paperflag Tricolor Is Required.oddy Self Adhesive Paper Flag Tricolor Is Required.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad2515plain Copier Paper V3 Isi Marked To Is 14490 30 Ream 26 / 47 Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesstandardspaper Sizefsgrammage Gsm Of Thepaper75 Gsmpacking Andmarkingpackingream Of 500 Sheetadditional Specification Parameters - Plain Copier Paper V3 Isi Marked To Is 14490 30 Ream Specification Parameternamebid Requirement Allowed Valuesjk Photocopier Paper Fssize Is Required.jk Photocopier Paper Fs Size Is Required.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad3015cartridge Drawing Paper As Per Is 1848 Part 2 200 Ream Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valueseco Markwhether Eco Marked?yes, Nogsm And Dimensionlength Of Sheetmm860, 841width Of Sheetmm610, 594gsm Of Paper20027 / 47 Packingnumber Of Sheets In A Packnos100 /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesadditional Specification Parameters - Cartridge Drawing Paper As Per Is 1848 Part 2 200 Ream Specification Parameternamebid Requirement Allowed Valuesdrawing Paper Pink Color Isacceptable.drawing Paper Pink Color Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad20015dak Pad V2 20 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementtype Of Dak Padfile Board Binder-dak Pad, Four Flapper File Board-dakpadlamination Of Boardpaper Liner, Rexine, No Lamination Of Boardnumber Of Flaps4 Numberseach Flap Shall Be Insertedinside The File Board Andpasted On Both Sides Of Thefile Board35 Mm, 40 Mm, 45 Mm, 50 Mm, 55 Mmmaterialmaterial Of Boardstraw Board, Pulp Board Grade G Confmg To Is 4664-1986 With The Latest Amendment, Pulp Board Grades Confmg To Is 4664-1986 With The Latestamendmentthe Thickness Of File Board2 Mm, 3 Mm, 4 Mm28 / 47 Coating Of Covering Flapcloth-coated Craft Paper, Cloth-coated Paper, Rexine-coated Paper, Ply Coated Paperdimensionsize Of The Dak Padfinished250 Mm X 345 Mm, 250 Mm X 370 Mm, 260 Mm X370 Mm, 355 Mm X 250 Mm, 360 Mm X 250 Mmflap Width Left Side75 Mm, 90 Mm, 230 Mm, 250 Mmflap Width Right Side75 Mm, 90 Mm, 200 Mm, 230 Mmside Flap Length130 Mm, 240 Mm, 342 Mmtesting Andcertificationavailability Of Test Reportfrom Designated Ahsp /nabl / Ilac Accredited Orcentral Government Lab Toprove Conformity Ofproducts To Thespecificationyes, No /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesadditional Specification Parameters - Dak Pad V2 20 Pieces Specification Parameternamebid Requirement Allowed Valuesbranded Binder File 4strip Is Acceptablebranded Binder File 4 Strip Is Acceptable* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad2015pen Stand V2 10 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementproduct Typepen Stand Four Sockets29 / 47 Pen Stand Set Contentspen Stand With Calendar, Pen Stand With Digital Clock, Pen Stand With Analog Clock, Pen Stand With Visitingcardholder, Pen Stand With Mobile Holder, Only Penstandpen Stand /tumbler Designrectangle, Oval, Roundnumber Of Accessories Tray0, 1, 2, 3, 4, 5, 6materialmaterialplastic, Wood, Plastic And Mesh In Case Of Tumblerthickness Of Material1 Mm, 2 Mm, 3 Mm, 4 Mmdimensionlength /major Axis Of Thepen Stand Base Or Height Ofthe Tumbler Tolerance 0dot1 Inches3 Inches, 4 Inches, 5 Inches, 6 Inches, 7 Inches, 8inches, 9 Inches, 10 Inches, 10.5 Inches, 11 Inches, 11.5 Inches, 12 Incheswidth / Minor Axis Of Thepen Stand Base Or Diameterof The Tumbler Tolerance 0dot1 Inches3 Inches, 4 Inches, 4.25 Inches, 4.50 Inches, 4.75inches, 5.00 Inches, 5.25 Inches, 5.50 Inches, 5.75inches, 6.00 Inchescolour & Finishcolourblack, Gold, Black And Gold, Walnut Dark Brown, Natural Wood Grain, Walnut Melamine Polish, Na /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesadditional Specification Parameters - Pen Stand V2 10 Pieces Specification Parameternamebid Requirement Allowed Valuesbranded Wooden Pen Standbig Sizeis Acceptable.branded Wooden Pen Stand Big Sizeis Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad1015markers For White Board V2 25 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation30 / 47 /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgenerictype Of Inkalcohol-based Inktip Point Typebullet Or Fine Tiptip Width Size2 Mm, 2.5 Mmrefillable Marker Penyesadditional Specification Parameters - Markers For White Board V2 25 Pieces Specification Parameternamebid Requirement Allowed Valuescamlin White Board Markeris Acceptable.camlin White Board Marker Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad2515permanent Marker Pen 40 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementtype Of Inkflorescent Water Based, Alcohol Basedink Colouryellow, Pink, Green, Red, Black, Bluethe Shape Of The Marker/pen Tipbullet Shape, Chisel Shapeline Width1.0 Mmheat Resistant Inkyes, No31 / 47 Agree To Provide Advancesamples For Buyer Sapproval Beforecommencement Of Supplyapplicable In Case Oforders Placed Against Bidand Not Applicable In Caseof Direct Buyingyes, No, Not Applicablematerialmarker /pen Body Made Ofplastic, Metalwriting Tip Made Up Ofhydrocarbon Tip, Hard Acrylic Tip, Hard Polyester Tipmarking Andpackingmarking On The Marker /penbarrel/capmanufacturer Name Or Initials Or Registered Trademarketc., As Per Buyer S Requirement To Be Indicatedduring Bid Creationpacking Of Each Marker/penpaper Poly Pouch, Cardboard Boxtesting Andcertificationavailability Of Test Reportfrom Designated Ahsp /nabl / Ilac Accredited Orcentral Government Lab Toprove The Conformity Ofproducts To Thespecificationyes, Notest Reports To Be Furnishedto The Buyer On Demand, Ifclaimed To Be Availableyes, Not Applicable /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesadditional Specification Parameters - Permanent Marker Pen 40 Pieces Specification Parameternamebid Requirement Allowed Valuescamlin Cd/ Dvd Marker Isacceptable.camlin Cd/ Dvd Marker Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad4015scissors 10 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier32 / 47 o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesmaterialhandle Materialplasticphysicalcharacteristicsblade Length Mm100.0 Millimeteroverall Length Mm100blade Thickness Mm1.8 - 2.5additional Specification Parameters - Scissors 10 Pieces Specification Parameternamebid Requirement Allowed Valueskangaro/ Oddy Stainlesssteel Big Size Scissors Isacceptablekangaro/ Oddy Stainless Steel Big Size Scissors Is Acceptable* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad1015dak Pad V2 30 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgeneralrequirementtype Of Dak Padfile Board Binder-dak Pad, Four Flapper File Board-dakpadlamination Of Boardpaper Liner, Rexine, No Lamination Of Boardnumber Of Flaps2 Numbers33 / 47 Each Flap Shall Be Insertedinside The File Board Andpasted On Both Sides Of Thefile Board35 Mm, 40 Mm, 45 Mm, 50 Mm, 55 Mmmaterialmaterial Of Boardstraw Boardthe Thickness Of File Board2 Mm, 3 Mm, 4 Mmcoating Of Covering Flapcloth-coated Craft Paper, Cloth-coated Paper, Rexine-coated Paper, Ply Coated Paperdimensionsize Of The Dak Padfinished250 Mm X 345 Mm, 250 Mm X 370 Mm, 260 Mm X370 Mm, 355 Mm X 250 Mm, 360 Mm X 250 Mmflap Width Left Side75 Mm, 90 Mm, 230 Mm, 250 Mmflap Width Right Side75 Mm, 90 Mm, 200 Mm, 230 Mmside Flap Length130 Mm, 240 Mm, 342 Mmtesting Andcertificationavailability Of Test Reportfrom Designated Ahsp /nabl / Ilac Accredited Orcentral Government Lab Toprove Conformity Ofproducts To Thespecificationyes, No /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesadditional Specification Parameters - Dak Pad V2 30 Pieces Specification Parameternamebid Requirement Allowed Valuesbranded Dak Pad 2 Stripsheavy Duty Is Acceptable.branded Dak Pad 2 Strips Heavy Duty Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad3015knife Blades 25 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation34 / 47 /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesdimensionalparameterstype Of Cutter Knifepaper Cutter Knife Snap Off Blade, All Purposeknife, Dessert Knife, Stanleymaterial Of Bodyplasticmaterial Of Bladecarbon Steel, Hsslength Of Blade In Mm40 - 150 Millimeterwidth Of Blade In Mm9 - 25 Millimeterthickness Of Blades In Mm0.3 - 4 Millimeteradditional Specification Parameters - Knife Blades 25 Pieces Specification Parameternamebid Requirement Allowed Valuesbrande Big Size Papercutter Is Acceptable.brande Big Size Paper Cutter Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad2515metric Steel Scales V2 As Per Is 1481 10 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgoverningspecificationgoverning Specificationconforming To Is 1481isi Markingyes, Nostandardsprincipal Dimensions Of Thescales - Nominal Size In Cm30 Cmmetric Steel Scale Typestype A, Type Aa, Type B, Type Bb, Type Ccmaterial Of The Scalespring Steel, Managanese Spring Steel35 / 47 Additional Specification Parameters - Metric Steel Scales V2 As Per Is 1481 10 Pieces Specification Parameternamebid Requirement Allowed Valuesnatraj 30cm Steel Scale Isacceptable.natraj 30cm Steel Scale Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad1015ball Point Pens V2 As Per Is 3705 100 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgoverningspecificationgoverning Specificationconforming To Is 3705isi Markingyes, Nostandardstype Of Ball Point Pensingle Refill Ball Point Pen, Desk Type Ball Point Penmaterial Used In Themanufacture Of Ball Pointpenmetal, Plastic, Both Metal And Plasticgoverning Specification Forrefill Of The Ball Point Penconforming To Is 3707diameter Of The Ball Inmm0.5 Mm, 0.6 Mm, 0.7 Mm, 0.8 Mm, 0.9 Mm, 1.0 Mm, 1.1 Mm, 1.2 Mmgoverning Specification Forink Of The Ball Point Penconforming To Is 5805colour Of The Inkblack, Blueadditional Specification Parameters - Ball Point Pens V2 As Per Is 3705 100 Pieces 36 / 47 Specification Parameternamebid Requirement Allowed Valuesmontex Mega Top Ballpoint Pen Is Acceptable.montex Mega Top Ball Point Pen Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad10015gel Pen V3 10 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgenericdesign Of The Gel Penretractable, Capped, Twist, Magneticbody Material Of The Gelpenmetal, Plasticrefillable Typeyes, Nodiameter Of The Pen Tip Inmm0.5 Mm, 0.6 Mm, 0.7 Mm, 0.8 Mm, 0.9 Mm, 1.0 Mmcolour Of The Inkblueadditional Specification Parameters - Gel Pen V3 10 Pieces Specification Parameternamebid Requirement Allowed Valuesuniball Pen Blue Isacceptable.uniball Pen Blue Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity37 / 47 :. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad1015gel Pen V3 10 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgenericdesign Of The Gel Penretractable, Capped, Twist, Magneticbody Material Of The Gelpenmetal, Plasticrefillable Typeyes, Nodiameter Of The Pen Tip Inmm0.5 Mm, 0.6 Mm, 0.7 Mm, 0.8 Mm, 0.9 Mm, 1.0 Mmcolour Of The Inkblackadditional Specification Parameters - Gel Pen V3 10 Pieces Specification Parameternamebid Requirement Allowed Valuesuniball Pen Black Isacceptable.uniball Pen Black Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad1015ink Refills V2 300 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation38 / 47 /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgenerictype Of Ink Refillgel Pen Ink Refill, Sparkel Pen Ink Refill, Roller Ball Penink Refill, Fineliner Refillrefill Ink Colourblueink Typeoil Based Ink, Water Based Ink, Water Based With Gelpigmented Ink, Shimmering Ink, Water Based Withglitter Pigmented Inkrefill Tip Sizein Mm0.4 Mm, 0.5 Mm, 0.6 Mm, 0.7 Mm, 0.8 Mm, 0.9 Mm, 1.0 Mm, 1.1 Mm, 1.2 Mm, 1.3 Mm, 1.4 Mmrefill Body Materialplastic, Metalshelf Lifeshelf Life Of Pen Refill Inyears1 Year, 2 Year, 3 Year, 4 Year, 5 Year, 6 Yearadditional Specification Parameters - Ink Refills V2 300 Pieces Specification Parameternamebid Requirement Allowed Valuesink Refills For Ball Pointpen Is Required.ink Refills For Ball Point Pen Is Required.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad30015ink Refills V2 100 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgenerictype Of Ink Refillgel Pen Ink Refill, Sparkel Pen Ink Refill, Roller Ball Penink Refill, Fineliner Refillrefill Ink Colourblue, Black, Red39 / 47 Ink Typeoil Based Ink, Water Based Ink, Water Based With Gelpigmented Ink, Shimmering Ink, Water Based Withglitter Pigmented Inkrefill Tip Sizein Mm0.4 Mm, 0.5 Mm, 0.6 Mm, 0.7 Mm, 0.8 Mm, 0.9 Mm, 1.0 Mm, 1.1 Mm, 1.2 Mm, 1.3 Mm, 1.4 Mmrefill Body Materialplastic, Metalshelf Lifeshelf Life Of Pen Refill Inyears1 Year, 2 Year, 3 Year, 4 Year, 5 Year, 6 Year /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesadditional Specification Parameters - Ink Refills V2 100 Pieces Specification Parameternamebid Requirement Allowed Valuesink Refills For Ball Pointpen Blue 50 Nos And Black50 Nos Is Required.ink Refills For Ball Point Pen Blue 50 Nos And Black 50 Nos Isrequired.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad10015ink Refills V2 40 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgenerictype Of Ink Refillgel Pen Ink Refill, Sparkel Pen Ink Refill, Roller Ball Penink Refill, Fineliner Refillrefill Ink Colourblue, Blackink Typeoil Based Ink, Water Based Ink, Water Based With Gelpigmented Ink, Shimmering Ink, Water Based Withglitter Pigmented Ink40 / 47 Refill Tip Sizein Mm0.4 Mm, 0.5 Mm, 0.6 Mm, 0.7 Mm, 0.8 Mm, 0.9 Mm, 1.0 Mm, 1.1 Mm, 1.2 Mm, 1.3 Mm, 1.4 Mmrefill Body Materialplastic, Metalshelf Lifeshelf Life Of Pen Refill Inyears1 Year, 2 Year, 3 Year, 4 Year, 5 Year, 6 Year /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesadditional Specification Parameters - Ink Refills V2 40 Pieces Specification Parameternamebid Requirement Allowed Valuespilot Pen Ink Refills V5/v7 Isacceptable.pilot Pen Ink Refills V5/v7 Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad4015carbon Papers As Per Is 1551 3 Packet Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuescertificationisi Markedyes, Nodetails Of Gradegradegrade-i, Grade-ii, Grade-iii, Grade-ivsubstance Of Base Papergsm10.5-12.5, 14.5-16.5, 19-22, 25.5-28.5, 18-20coating Gsm9-11, 10-12, 11-13.5, 13-15.5, 42-43durability Minimumnumber Of Impressions Onthe Same Spot Nos8, 9, 10, 12manifolding Minimumnumber Of Copies Nos8, 6, 5, 441 / 47 Size And Colourcolourblack, Blue /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesadditional Specification Parameters - Carbon Papers As Per Is 1551 3 Packet Specification Parameternamebid Requirement Allowed Valuescamlin Carbon Paper Isacceptable.camlin Carbon Paper Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad315stamp Pads 25 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesmaterialmaterial Of Padcotton, Othersmaterial Of Boxmetal, Plasticcolourcolor Of Inkblueadditional Specification Parameters - Stamp Pads 25 Pieces Specification Parameternamebid Requirement Allowed Valuesoddy/ Camlin Stamp Pad Isrequired.oddy/ Camlin Stamp Pad Is Required.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. 42 / 47 //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad2515stamp - Pad Ink As Per Is 393 10 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesgoverningspecificationgoverning Specificationconforming To Is 393isi Certification Markyes, Nocolorcolour Of Inkviolet, Blue, Green, Red, Blackpackingnet Content In Ml Of Inkcontainer60 Mladditional Specification Parameters - Stamp - Pad Ink As Per Is 393 10 Pieces Specification Parameternamebid Requirement Allowed Valuescamlin Ink For Stamp Pad60ml Is Required.camlin Ink For Stamp Pad 60ml Is Required.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad1015packaging Tape 60 Pieces Minimum 50% Local Content Required For Qualifying As Class 1 Local Supplier o o /technical Specifications* o / As Per Gem Category Speci Cation43 / 47 /speci Cation o o /specificationname 8 8 M M /bid Requirementallowed Valuesmaterialmaterial Of Filmbiaxially Oriented Polypropylene Bopp, Bopp Andself Adhesive Tapedimensionlength Of Tape On A Rollmeter65, 5, 15, 25, 40, 50, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, 1000width Of Tape On A Roll Mm48, 12, 24, 36, 60, 72, 84, 96, 108, 120, 132, 144, 156, 168, 180, 192, 204, 216, 228, 240, 252, 264, 276, 288thickness Of Film Inmicron25, 23, 29, 50inner Diameter Of Coremm25additional Specification Parameters - Packaging Tape 60 Pieces Specification Parameternamebid Requirement Allowed Valuescolor Tape 1 Red, Blackand Green Is Acceptable.color Tape 1 Red, Black And Green Is Acceptable.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. //h X H X /consignees/reporting Officer And Quantity:. .:. ./s.no. //h X H X /consigneereporting/officer /address /quantity /deliverydays1**********************hoshangabad6015special Terms And Conditions-version:2 Effective From 23-12-2024 For Category Plain Copier Paperv3 Isi Marked To Is 144901. Catalogue Image Upload Guidelinesproduct Catalogue Images Uploaded Should Carry The Following Informations:1. Should Have Original Product Image.2. Should Carry The Marking Information As Per Is:14490 Such As Isi Mark, Bis License Number Cm/l, Net Weight Of The Ream, Gsm Etc.3. Should Have The Isi Mark Label On The Wrapping Cover Eco-mark - Eco Mark Is Applicable As Per G.s.r. 85e Dated 21st February 1991 Annexure - I For Thiscategory. As Such Buyers May Also Opt For Eco Mark Labelled Product While Creating Bid. In Such Casesbuyer Shall Verify Eco Mark Label At The Time Of Evaluation Of Bid/receipt Of Material Before Issuing Crac.44 / 47 : : U U /buyer Added Bid Specific Terms And Conditions1. Genericoption Clause: The Purchaser Reserves The Right To Increase Or Decrease The Quantity To Be Ordered Upto 25 Percent Of Bid Quantity At The Time Of Placement Of Contract. The Purchaser Also Reserves The Right Toincrease The Ordered Quantity Up To 25% Of The Contracted Quantity During The Currency Of The Contract Atthe Contracted Rates. The Delivery Period Of Quantity Shall Commence From The Last Date Of Originaldelivery Order And In Cases Where Option Clause Is Exercised During The Extended Delivery Period Theadditional Time Shall Commence From The Last Date Of Extended Delivery Period. The Additional Deliverytime Shall Be Increased Quantity Original Quantity Original Delivery Period In Days, Subject Tominimum Of 30 Days. If The Original Delivery Period Is Less Than 30 Days, The Additional Time Equals Theoriginal Delivery Period. The Purchaser May Extend This Calculated Delivery Duration Up To The Originaldelivery Period While Exercising The Option Clause. Bidders Must Comply With These Terms.2. Sample Clausefor Clothing And Allied Items, If Pre-dispatch Inspection Clause Has Been Selected In The Bid, The Inspectionagency Shall Forward Sample From The Accepted Lot Duly Identified/ Sealed By It, As Reference Sample Toeach Consignee One Reference Sample Per Consignee For Comparing The Lot Received At Consignee Endwith Such Reference Sample. Such Reference Samples Will Be Treated As Part Of Supplied Quantity From Thelot And Cost Shall Be Borne By The Buyer.3. Past Project Experienceproof For Past Experience And Project Experience Clause: For Fulfilling The Experience Criteria Anyone Of The Following Documents May Be Considered As Valid Proof For Meeting The Experience Criteria:a.contract Copy Along With Invoices With Self-certification By The Bidder That Service/supplies Against Theinvoices Have Been Executed.b. Execution Certificate By Client With Contract Value.c. Any Other Documentin Support Of Contract Execution Like Third Party Inspection Release Note, Etc.proof For Past Experience Andproject Experience Clause: For Fulfilling The Experience Criteria Any One Of The Following Documents May Beconsidered As Valid Proof For Meeting The Experience Criteria:a. Contract Copy Along With Invoices Withself-certification By The Bidder That Service/supplies Against The Invoices Have Been Executed.b. Executioncertificate By Client With Contract Value.c. Any Other Document In Support Of Contract Execution Like Thirdparty Inspection Release Note, Etc.4. Past Project Experiencethe Bidder / Oem Themselves Or Through Resellers, Should Have Executed Project For Supply Andinstallation / Commissioning Of Same Or
Gem Bids For Hiring Of Agency For Iso Certification Service - Iso 9001 -quality Management System Qms, Iso 14001 -environmental Management System Ems, Iso 45001 -occupational Health & Safety Management System Ohas;surveillance Audit, Re-certification Au..
Gem Bids For Hiring Of Consultant For Energy Efficiency Services -consulting Firm; Solar Power Consultant; Post - Graduate Indomain Area, Graduate / Post- Graduate With Domainknowledge Expertise; 1 - 3 Years; Onsite; Iso Energymanagement Certification
Offloading Work To Outside Agency Towards Safe Load Testing And Certification Of 12 Nos Different Model Hydraulic Cranes And Proof Load Testing Of Hooks Of 17 Nos Eot Crane In 24 96 Draglines And Different Workshops Of Dudhichua Project
Gem Bids For Four Mp Network Ptz Camera Forty Five X Zoom Ir Rangethree Hundred Meter Standardization Testing And Qualitycertification Verified, Four Mp Network Bullet Cameraverifocal Zoom Ir Range Sixty Meter Standardization Testingand Quality Certification Verified, Pvc Box And Pvc Pipewith Bends For Safety Of Cameras Wiring, Weather Proofoutdoor Boxes For Cameras Accessories With Locks, Powersurge Protector For Cameras Accessories, Four Portmanaged Gigabit Ethernet Switch With Poe And Two Sfpfiber Module Slots, Sfp Fiber Module For Network Switch, Ethernet Utp Cable, Power Cable Two Core Ten Sqmmaluminium For Far Connection To Cameras, Ofc Fiber Cablesix Fiber Single Mode Unarmoured, Lc To Lc Fiber Patchcable Single Mode, Fiber Joint Box, Necessaries Hardwareand Accessories For Cameras, Necessaries Hardware Andaccessories For Electrical, Network Video Recorder Thritytwo Channel With Smart Features, Eight Tb Hard Disk Forsurveillance, Commercial Grade Fifty Five Inch Screen Formonitoring With Hdmi Cable, Suitable Networking Six Uracks With Accessories Nvr At Sub Sector Control Rooms, Automatic Swing Gate With Allied Accessories, Prefabricatedsentry Post With Size Twevle Feet X Twevle With Front Sidealuminum Paneling And Glass Windows And Air Conditionerand Electric Work With Bathroom Provision, Renovation Ofkote Room With Access Management Door Lock Device Forentrance, Installations Transportation And Commissioning Ofthe Above Project
Gem Bids For Certification Of - A Integrated Management System Imsincludes- I Iso 9001: 2015 Qms Ii Iso
Gem Bids For Steel Tubes, Tubulars And Other Wrought Steel Fittings V2as Per Is 1239 Part 1 Q2 . . % % 4 4 /mse Exemption For Years Ofexperience And Turnoverno& % & % . . % % 4 4 /startup Exemption For Years Ofexperience And Turnoverno 5 5 & & /document Requiredfrom Sellercertificate Requested In Atc, Oem Authorizationcertificate, Additional Doc 1 Requested In Atc, Additionaldoc 2 Requested In Atc, Additional Doc 3 Requested Inatc, Additional Doc 4 Requested In Atc*in Case Any Bidder Is Seeking Exemption From Experience /turnover Criteria, The Supporting Documents To Prove Hiseligibility For Exemption Must Be Uploaded For Evaluation Bythe Buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do You Want To Showdocuments Uploaded By Bidders To Allbidders Participated In Bid?yes Documents Submitted As Part Of A Clarification Orrepresentation During The Tender/bid Process Will Also Bedisplayed To Other Participated Bidders After Log In -- B B C C 5 5 D D / Minimum Number Ofbids Required To Disable Automatic Bidextension3 D /bid Number: Gem/2025/b/6590919; /dated: 21-08-2025 & & / Bid Document1 / 27 ; 9; 9 D D, , M M -- / / Number Of Days For Which Bidwould Be Auto--extended7 O %o % ;5 ;5 ; ; /bid To Ra Enabledyeso %o % P P /ra Quali Cation Ruleh1-highest Priced Bid Elimination5 5 R R /itc Available Tobuyeryes 4 4 /type Of Bidtwo Packet Bid4 4 T T /primary Product Categorysteel Tubes, Tubulars And Other Wrought Steel Fittings V2as Per Is 1239 Part 1 U U & W & W /time Allowed For Technicalclarifications During Technical Evaluation3 Days x x B B Y Y x x 4 4 / % % < 9 < 9 : : /inspection Required Byempanelled Inspection Authority / Agenciespre-registered With Gemno U U Y Y /evaluation Methodgroup Wise Evaluation & & /arbitration Clauseno /mediation Clauseno //bid Details /emd Detail > /advisory Bankidbi Bankschedule-1 /emd Amount In Inr25000schedule-2 /emd Amount In Inr25000schedule-3 /emd Amount In Inr25000 /epbg Detail > /advisory Bankidbi Bank 4 %/epbg Percentage%5.00 B /duration Of Epbgrequired Months.14a. . ^ % & 4& % & % 4 > O 9 /emd Exemption: The Bidder Seeking Emd Exemption, Must Submit The Valid Supporting Document2 / 27 For The Relevant Category As Per Gem Gtc With The Bid. Under Mse Category, Only Manufacturers For Goods Andservice Providers For Services Are Eligible For Exemption From Emd. Traders Are Excluded From The Purview Of Thispolicy.b. The Emd Amount Will Be Applicable For Each Schedule/group Selected During Bid Creation.c. , , ` X < ; / Emd & Performance Securityshould Bein Favour Of Beneficiary, Wherever It Is Applicable. ` ` /beneficiary : Head Of Department, Financefinance Department, Moil Limited, Moil Bhavan, 1a, Katol Road, Nagpur-440013 The Details Of Beneficiarybank For Sending Details Of Bg Under Sfms Platform Is Advisory Bank: Idbi Bank, Idbi Bank, Gupta House, Ravindranath Tagore Road, Civil Lines Nagpur-440001, Advisory Bank Ifsc Code: Ibkl0000389 & Currentaccount No. 041102000018027.moil Limited /splitting ; / Bid Splitting Not Applied. /mii Purchase Preference /mii Purchase Preferenceyes /mse Purchase Preference /mse Purchase Preferenceyes1. Preference To Make In India Products For Bids < 200 Crore:preference Shall Be Given To Class 1 Local Supplieras Defined In Public Procurement Preference To Make In India, Order 2017 As Amended From Time To Time And Itssubsequent Orders/notifications Issued By Concerned Nodal Ministry For Specific Goods/products. The Minimumlocal Content To Qualify As A Class 1 Local Supplier Is Denoted In The Bid Document. If The Bidder Wants To Avail Thepurchase Preference, The Bidder Must Upload A Certificate From The Oem Regarding The Percentage Of The Localcontent And The Details Of Locations At Which The Local Value Addition Is Made Along With Their Bid, Failing Whichno Purchase Preference Shall Be Granted. In Case The Bid Value Is More Than Rs 10 Crore, The Declaration Relatingto Percentage Of Local Content Shall Be Certified By The Statutory Auditor Or Cost Auditor, If The Oem Is A Companyand By A Practicing Cost Accountant Or A Chartered Accountant For Oems Other Than Companies As Per The Publicprocurement Preference To Make-in -india Order 2017 Dated 04.06.2020. Only Class-i And Class-ii Local Suppliersas Per Mii Order Dated 4.6.2020 Will Be Eligible To Bid. Non - Local Suppliers As Per Mii Order Dated 04.06.2020 Arenot Eligible To Participate. However, Eligible Micro And Small Enterprises Will Be Allowed To Participate .thebuyers Are Advised To Refer The Om No.f.1/4/2021-ppd Dated 18.05.2023.om No.1 4 2021 Ppd Dated 18.05.2023 For Compliance Of Concurrent Application Of Public Procurement Policyfor Micro And Small Enterprises Order, 2012 And Public Procurement Preference To Make In India Order, 2017. 2. Purchase Preference Will Be Given To Mses Having Valid Udyam Registration And Whose Credentials Arevalidated Online Through Udyam Registration Portal As Defined In Public Procurement Policy For Micro And Smallenterprises Mses Order, 2012 Dated 23.03.2012 Issued By Ministry Of Micro, Small And Medium Enterprises Andits Subsequent Orders/notifications Issued By Concerned Ministry. If The Bidder Wants To Avail Themselves Of Thepurchase Preference, The Bidder Must Be The Manufacturer / Oem Of The Offered Product On Gem. Traders Areexcluded From The Purview Of Public Procurement Policy For Micro And Small Enterprises And Hence Resellersoffering Products Manufactured By Some Other Oem Are Not Eligible For Any Purchase Preference. In Respect Of Bid3 / 27 For Services, The Bidder Must Be The Service Provider Of The Offered Service. Relevant Documentary Evidence Inthis Regard Shall Be Uploaded Along With The Bid In Respect Of The Offered Product Or Service And Buyer Will Decideeligibility For Purchase Preference Based On Documentary Evidence Submitted, While Evaluating The Bid. If L-1 Isnot An Mse And Mse Seller S Has / Have Quoted Price Within L-1+ 15% Selected By Buyer Of Margin Ofpurchase Preference /price Band Defined In Relevant Policy, Such Mse Seller Shall Be Given Opportunity To Matchl-1 Price And Contract Will Be Awarded For 25% Selected By Buyer Percentage Of Total Quantity. The Buyers Areadvised To Refer The Om No. F.1/4/2021-ppd Dated 18.05.2023 Om No.1 4 2021 Ppd Dated 18.05.2023 Forcompliance Of Concurrent Application Of Public Procurement Policy For Micro And Small Enterprises Order, 2012and Public Procurement Preference To Make In India Order, 2017. Benefits Of Mse Will Be Allowed Only If Seller Isvalidated On-line In Gem Profile As Well As Validated And Approved By Buyer After Evaluation Of Documentssubmitted. 3. Estimated Bid Value Indicated Above Is Being Declared Solely For The Purpose Of Guidance On Emd Amount Andfor Determining The Eligibility Criteria Related To Turn Over, Past Performance And Project / Past Experience Etc.this Has No Relevance Or Bearing On The Price To Be Quoted By The Bidders And Is Also Not Going To Have Anyimpact On Bid Participation. Also This Is Not Going To Be Used As A Criteria In Determining Reasonableness Ofquoted Prices Which Would Be Determined By The Buyer Based On Its Own Assessment Of Reasonableness Andbased On Competitive Prices Received In Bid / Ra Process. 4. Reverse Auction Would Be Conducted Amongst All The Technically Qualified Bidders Except The Highest Quotingbidder. The Technically Qualified Highest Quoting Bidder Will Not Be Allowed To Participate In Ra. However, H-1will Also Be Allowed To Participate In Ra In Following Cases:i. If Number Of Technically Qualified Bidders Are Only 2 Or 3.ii. If Buyer Has Chosen To Split The Bid Amongst N Sellers, And H1 Bid Is Coming Within N.iii. In Case Primary Product Of Only One Oem Is Left In Contention For Participation In Ra On Elimination Of H-1.iv. If L-1 Is Non-mse And H-1 Is Eligible Mse And H-1 Price Is Coming Within Price Band Of 15% Of Non-mse L-1v. If L-1 Is Non-mii And H-1 Is Eligible Mii And H-1 Price Is Coming Within Price Band Of 20% Of Non-mii L-1if The Buyer Has Mentioned Mse Purchase Preference In Atc Then Service Provider Is Required To Uploadnecessary Documents For Mse Purchase Preference For Verification By The Buyer During Evaluation.evaluation Method Group Wise Evaluation Method Contract Will Be Awarded Schedulewise And The Determination Of L1 Will Be Done Separately For Each Schedule.the Details Of Item-consignee Combination Covered Under Each Schedule Are As Under:evaluationschedulesitem/categoryconsignee/reportingofficerconsignee Addressquantityschedule-1steel Tubes, Tubulars And Otherwrought Steel Fittings V2 As Per Is1239 Part 1nitin Surendraghodeswarpo:kandri, Tah:ramtek, Dist:nagpur, Maharashtra, 44140144140154schedule-2steel Tubes, Tubulars And Otherwrought Steel Fittings V2 As Per Is1239 Part 1nitin Surendraghodeswarpo:kandri, Tah:ramtek, Dist:nagpur, Maharashtra, 44140144140156schedule-3steel Tubes, Tubulars And Otherwrought Steel Fittings V2 As Per Is1239 Part 1nitin Surendraghodeswarpo:kandri, Tah:ramtek, Dist:nagpur, Maharashtra, 44140144140113steel Tubes, Tubulars And Otherwrought Steel Fittings V2 As Per Is1239 Part 1nitin Surendraghodeswarpo:kandri, Tah:ramtek, Dist:nagpur, Maharashtra, 44140144140133steel Tubes, Tubulars And Otherwrought Steel Fittings V2 As Per Is1239 Part 1nitin Surendraghodeswarpo:kandri, Tah:ramtek, Dist:nagpur, Maharashtra, 4414014414013steel Tubes, Tubulars And Otherwrought Steel Fittings V2 As Per Is1239 Part 1nitin Surendraghodeswarpo:kandri, Tah:ramtek, Dist:nagpur, Maharashtra, 44140144140114 / 27 Steel Tubes, Tubulars And Other Wrought Steel Fittings V2 As Per Is 1239 Part 1 54 Metric Tonne 5 5 1 2 & & % % % % B B < < % % 4 C4 C B B /minimum 50% And 20% Localcontent Required For Qualifying As Class 1 And Class 2 Local Supplier Respectivelybis Requiredyes w w /technical Specifications* w / As Per Gem Category Speci Cation /speci Cation w w /specificationname B B U U /bid Requirementallowed Valuesgoverningspecificationsgoverning Specificationsgenerally Conforming To Is 1239 Part 1 - Latestmaterial, Design &dimensionsmanufacturing Process Oftubeelectric Resistance Welded Or High Frequncyinduction Welded Erw Or Hfiwend Condition Of Tubescrewed & Socketed Endclassification Of Steel Tubedepending On Wallthicknessmediumsurface Condition Of Thetubegalvanized Tubenominal Bore Of Tube Mm100additional Specification Parameters - Steel Tubes, Tubulars And Other Wrought Steel Fittings V2as Per Is 1239 Part 1 54 Metric Tonne Specification Parameternamebid Requirement Allowed Valueseligibility Criteria:the Bidder Should Upload Bis License Issued To Manufacturer For Offereditem Valid As On The Date Of Bid Opening. Copy Of The Valid Bis License Shouldbe Uploaded, Failing Which The Offer Submitted By Bidder Shall Be Liable To Beignored. Make/ Manufacturer Name And Brand Name Of The Offered Itemmust Be Clearly Specified By The Bidder.pre-qualifying Condition:the Bidder Should Have Supplied Tendered Product S During Preceding 3financial Years I.e. Current Year And Three Previous Financial Years As Ondate Of Opening Of The Bid As Per The Following Criteria: I Single Order Of Atleast 35% Of Quantity Under Procurement; Or Ii Two Orders Of At Least 20?chof Quantity Under Procurement; Or Iii Three Orders Of At Least 15?ch Ofquantity Under Procurement.pre-qualifying Condition-1:guarantee / Warrantee:satisfactory Performance Certificate Issued By Respective Buyer Organizationalong With The Above Orders Should Be Uploaded With The Bid. The Materialsupplied Shall Be Guaranteed For A Period Of 12 Months From The Date Ofreceipt At Destination Towards Manufacturing Defect, Bad Workmanship Andsubstandard Material. Such Material Shall Be Replaced By You Free Of Cost.5 / 27 Test Certificates: Quantityvariation : Class:the Successful Bidder Shall Be Required To Submit Test Certificates Of Theoffered Item Along With Supply, As Per Is Provisions Free Of Cost. Thementioned Quantity Is Subject To Change 20% And Order For Such Changedquantity Shall Be Placed. Supply Quantity Variation +/- 2% Is Acceptable.medium.technical Specification:galvanised Mild Steel Tube Conforming To Is 1239 Part-i Of 2004 With Latestamendments & Isi Mark, Continuously Welded, Electric Resistance Weldederw, High Frequency Induction Welded Hfiw/hot Finished Welded Hfw, Screwed On Both Ends To Is:554/86 For Pipe Threading, Suitable For Gas, Water & Steam Application, One End Socketed And Other End Protected Withplastic Thread Protector In Random Lengths Of 5 To 7 Mtrs., Socket To Confirmis 1239 Part- Ii Of 1992 In Following Sizes.specification Parameternamebid Requirement Allowed Values* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. 5 ; 5 ; O %o % 4 4 /input Tax Credititc And Reverse Chargercm Details 5 ; 5 ; /itc On Gst 5 ; 5 ; /itc On Gst Cess100%na //o ; E O ; E /consignees/reporting Officer And Quantity5. .5. ./s.no. //o ; E O ; E /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin Surendraghodeswar441401, Po:kandri, Tah:ramtek, Dist:nagpur, Maharashtra, 4414015460steel Tubes, Tubulars And Other Wrought Steel Fittings V2 As Per Is 1239 Part 1 56 Metric Tonne 5 5 1 2 & & % % % % B B < < % % 4 C4 C B B /minimum 50% And 20% Localcontent Required For Qualifying As Class 1 And Class 2 Local Supplier Respectivelybis Requiredyes w w /technical Specifications* w / As Per Gem Category Speci Cation /speci Cation w w /specificationname B B U U /bid Requirementallowed Valuesgoverningspecificationsgoverning Specificationsgenerally Conforming To Is 1239 Part 1 - Latestmaterial, Design &dimensionsmanufacturing Process Oftubeelectric Resistance Welded Or High Frequncyinduction Welded Erw Or Hfiwend Condition Of Tubescrewed & Socketed End6 / 27 Classification Of Steel Tubedepending On Wallthicknessmediumsurface Condition Of Thetubegalvanized Tubenominal Bore Of Tube Mm150 /speci Cation w w /specificationname B B U U /bid Requirementallowed Valuesadditional Specification Parameters - Steel Tubes, Tubulars And Other Wrought Steel Fittings V2as Per Is 1239 Part 1 56 Metric Tonne Specification Parameternamebid Requirement Allowed Valueseligibility Criteria:the Bidder Should Upload Bis License Issued To Manufacturer For Offereditem Valid As On The Date Of Bid Opening. Copy Of The Valid Bis License Shouldbe Uploaded, Failing Which The Offer Submitted By Bidder Shall Be Liable To Beignored. Make/ Manufacturer Name And Brand Name Of The Offered Itemmust Be Clearly Specified By The Bidder.pre-qualifying Condition:the Bidder Should Have Supplied Tendered Product S During Preceding 3financial Years I.e. Current Year And Three Previous Financial Years As Ondate Of Opening Of The Bid As Per The Following Criteria: I Single Order Of Atleast 35% Of Quantity Under Procurement; Or Ii Two Orders Of At Least 20?chof Quantity Under Procurement; Or Iii Three Orders Of At Least 15?ch Ofquantity Under Procurement.pre-qualifying Condition-1:guarantee / Warrantee:satisfactory Performance Certificate Issued By Respective Buyer Organizationalong With The Above Orders Should Be Uploaded With The Bid. The Materialsupplied Shall Be Guaranteed For A Period Of 12 Months From The Date Ofreceipt At Destination Towards Manufacturing Defect, Bad Workmanship Andsubstandard Material. Such Material Shall Be Replaced By You Free Of Cost.test Certificates: Quantityvariation : Class:the Successful Bidder Shall Be Required To Submit Test Certificates Of Theoffered Item Along With Supply, As Per Is Provisions Free Of Cost. Thementioned Quantity Is Subject To Change 20% And Order For Such Changedquantity Shall Be Placed. Supply Quantity Variation +/- 2% Is Acceptable.medium.technical Specification:galvanised Mild Steel Tube Conforming To Is 1239 Part-i Of 2004 With Latestamendments & Isi Mark, Continuously Welded, Electric Resistance Weldederw, High Frequency Induction Welded Hfiw/hot Finished Welded Hfw, Screwed On Both Ends To Is:554/86 For Pipe Threading, Suitable For Gas, Water & Steam Application, One End Socketed And Other End Protected Withplastic Thread Protector In Random Lengths Of 5 To 7 Mtrs., Socket To Confirmis 1239 Part- Ii Of 1992 In Following Sizes* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. 5 ; 5 ; O %o % 4 4 /input Tax Credititc And Reverse Chargercm Details 5 ; 5 ; /itc On Gst 5 ; 5 ; /itc On Gst Cess7 / 27 %na 5 ; 5 ; /itc On Gst 5 ; 5 ; /itc On Gst Cess //o ; E O ; E /consignees/reporting Officer And Quantity5. .5. ./s.no. //o ; E O ; E /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin Surendraghodeswar441401, Po:kandri, Tah:ramtek, Dist:nagpur, Maharashtra, 4414015660steel Tubes, Tubulars And Other Wrought Steel Fittings V2 As Per Is 1239 Part 1 13 Metric Tonne 5 5 1 2 & & % % % % B B < < % % 4 C4 C B B /minimum 50% And 20% Localcontent Required For Qualifying As Class 1 And Class 2 Local Supplier Respectivelybis Requiredyes w w /technical Specifications* w / As Per Gem Category Speci Cation /speci Cation w w /specificationname B B U U /bid Requirementallowed Valuesgoverningspecificationsgoverning Specificationsgenerally Conforming To Is 1239 Part 1 - Latestmaterial, Design &dimensionsmanufacturing Process Oftubeelectric Resistance Welded Or High Frequncyinduction Welded Erw Or Hfiwend Condition Of Tubescrewed & Socketed Endclassification Of Steel Tubedepending On Wallthicknessmediumsurface Condition Of Thetubegalvanized Tubenominal Bore Of Tube Mm25additional Specification Parameters - Steel Tubes, Tubulars And Other Wrought Steel Fittings V2as Per Is 1239 Part 1 13 Metric Tonne Specification Parameternamebid Requirement Allowed Values8 / 27 Eligibility Criteria:the Bidder Should Upload Bis License Issued To Manufacturer For Offereditem Valid As On The Date Of Bid Opening. Copy Of The Valid Bis License Shouldbe Uploaded, Failing Which The Offer Submitted By Bidder Shall Be Liable To Beignored. Make/ Manufacturer Name And Brand Name Of The Offered Itemmust Be Clearly Specified By The Bidder.pre-qualifying Condition:the Bidder Should Have Supplied Tendered Product S During Preceding 3financial Years I.e. Current Year And Three Previous Financial Years As Ondate Of Opening Of The Bid As Per The Following Criteria: I Single Order Of Atleast 35% Of Quantity Under Procurement; Or Ii Two Orders Of At Least 20?chof Quantity Under Procurement; Or Iii Three Orders Of At Least 15?ch Ofquantity Under Procurement.pre-qualifying Condition-1:guarantee / Warrantee:satisfactory Performance Certificate Issued By Respective Buyer Organizationalong With The Above Orders Should Be Uploaded With The Bid. The Materialsupplied Shall Be Guaranteed For A Period Of 12 Months From The Date Ofreceipt At Destination Towards Manufacturing Defect, Bad Workmanship Andsubstandard Material. Such Material Shall Be Replaced By You Free Of Cost.test Certificates: Quantityvariation : Class:the Successful Bidder Shall Be Required To Submit Test Certificates Of Theoffered Item Along With Supply, As Per Is Provisions Free Of Cost. Thementioned Quantity Is Subject To Change 20% And Order For Such Changedquantity Shall Be Placed. Supply Quantity Variation +/- 2% Is Acceptable.medium.technical Specification:galvanised Mild Steel Tube Conforming To Is 1239 Part-i Of 2004 With Latestamendments & Isi Mark, Continuously Welded, Electric Resistance Weldederw, High Frequency Induction Welded Hfiw/hot Finished Welded Hfw, Screwed On Both Ends To Is:554/86 For Pipe Threading, Suitable For Gas, Water & Steam Application, One End Socketed And Other End Protected Withplastic Thread Protector In Random Lengths Of 5 To 7 Mtrs., Socket To Confirmis 1239 Part- Ii Of 1992 In Following Sizes.specification Parameternamebid Requirement Allowed Values* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. 5 ; 5 ; O %o % 4 4 /input Tax Credititc And Reverse Chargercm Details 5 ; 5 ; /itc On Gst 5 ; 5 ; /itc On Gst Cess100%na //o ; E O ; E /consignees/reporting Officer And Quantity5. .5. ./s.no. //o ; E O ; E /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin Surendraghodeswar441401, Po:kandri, Tah:ramtek, Dist:nagpur, Maharashtra, 4414011360steel Tubes, Tubulars And Other Wrought Steel Fittings V2 As Per Is 1239 Part 1 33 Metric Tonne 5 5 1 2 & & % % % % B B < < % % 4 C4 C B B /minimum 50% And 20% Localcontent Required For Qualifying As Class 1 And Class 2 Local Supplier Respectively9 / 27 Bis Requiredyes w w /technical Specifications* w / As Per Gem Category Speci Cation /speci Cation w w /specificationname B B U U /bid Requirementallowed Valuesgoverningspecificationsgoverning Specificationsgenerally Conforming To Is 1239 Part 1 - Latestmaterial, Design &dimensionsmanufacturing Process Oftubeelectric Resistance Welded Or High Frequncyinduction Welded Erw Or Hfiwend Condition Of Tubescrewed & Socketed Endclassification Of Steel Tubedepending On Wallthicknessmediumsurface Condition Of Thetubegalvanized Tubenominal Bore Of Tube Mm50additional Specification Parameters - Steel Tubes, Tubulars And Other Wrought Steel Fittings V2as Per Is 1239 Part 1 33 Metric Tonne Specification Parameternamebid Requirement Allowed Valueseligibility Criteria:the Bidder Should Upload Bis License Issued To Manufacturer For Offereditem Valid As On The Date Of Bid Opening. Copy Of The Valid Bis License Shouldbe Uploaded, Failing Which The Offer Submitted By Bidder Shall Be Liable To Beignored. Make/ Manufacturer Name And Brand Name Of The Offered Itemmust Be Clearly Specified By The Bidder.pre-qualifying Condition:the Bidder Should Have Supplied Tendered Product S During Preceding 3financial Years I.e. Current Year And Three Previous Financial Years As Ondate Of Opening Of The Bid As Per The Following Criteria: I Single Order Of Atleast 35% Of Quantity Under Procurement; Or Ii Two Orders Of At Least 20?chof Quantity Under Procurement; Or Iii Three Orders Of At Least 15?ch Ofquantity Under Procurement.pre-qualifying Condition-1:guarantee / Warrantee:satisfactory Performance Certificate Issued By Respective Buyer Organizationalong With The Above Orders Should Be Uploaded With The Bid. The Materialsupplied Shall Be Guaranteed For A Period Of 12 Months From The Date Ofreceipt At Destination Towards Manufacturing Defect, Bad Workmanship Andsubstandard Material. Such Material Shall Be Replaced By You Free Of Cost.test Certificates: Quantityvariation : Class:the Successful Bidder Shall Be Required To Submit Test Certificates Of Theoffered Item Along With Supply, As Per Is Provisions Free Of Cost. Thementioned Quantity Is Subject To Change 20% And Order For Such Changedquantity Shall Be Placed. Supply Quantity Variation +/- 2% Is Acceptable.medium.10 / 27 Technical Specification:galvanised Mild Steel Tube Conforming To Is 1239 Part-i Of 2004 With Latestamendments & Isi Mark, Continuously Welded, Electric Resistance Weldederw, High Frequency Induction Welded Hfiw/hot Finished Welded Hfw, Screwed On Both Ends To Is:554/86 For Pipe Threading, Suitable For Gas, Water & Steam Application, One End Socketed And Other End Protected Withplastic Thread Protector In Random Lengths Of 5 To 7 Mtrs., Socket To Confirmis 1239 Part- Ii Of 1992 In Following Sizes.specification Parameternamebid Requirement Allowed Values* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. 5 ; 5 ; O %o % 4 4 /input Tax Credititc And Reverse Chargercm Details 5 ; 5 ; /itc On Gst 5 ; 5 ; /itc On Gst Cess100%na //o ; E O ; E /consignees/reporting Officer And Quantity5. .5. ./s.no. //o ; E O ; E /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin Surendraghodeswar441401, Po:kandri, Tah:ramtek, Dist:nagpur, Maharashtra, 4414013360steel Tubes, Tubulars And Other Wrought Steel Fittings V2 As Per Is 1239 Part 1 3metric Tonne 5 5 1 2 & & % % % % B B < < % % 4 C4 C B B /minimum 50% And 20% Localcontent Required For Qualifying As Class 1 And Class 2 Local Supplier Respectivelybis Requiredyes w w /technical Specifications* w / As Per Gem Category Speci Cation /speci Cation w w /specificationname B B U U /bid Requirementallowed Valuesgoverningspecificationsgoverning Specificationsgenerally Conforming To Is 1239 Part 1 - Latestmaterial, Design &dimensionsmanufacturing Process Oftubeelectric Resistance Welded Or High Frequncyinduction Welded Erw Or Hfiwend Condition Of Tubescrewed & Socketed Endclassification Of Steel Tubedepending On Wallthicknessmediumsurface Condition Of Thetubegalvanized Tube11 / 27 Nominal Bore Of Tube Mm15 /speci Cation w w /specificationname B B U U /bid Requirementallowed Valuesadditional Specification Parameters - Steel Tubes, Tubulars And Other Wrought Steel Fittings V2as Per Is 1239 Part 1 3 Metric Tonne Specification Parameternamebid Requirement Allowed Valueseligibility Criteria:the Bidder Should Upload Bis License Issued To Manufacturer For Offereditem Valid As On The Date Of Bid Opening. Copy Of The Valid Bis License Shouldbe Uploaded, Failing Which The Offer Submitted By Bidder Shall Be Liable To Beignored. Make/ Manufacturer Name And Brand Name Of The Offered Itemmust Be Clearly Specified By The Bidder.pre-qualifying Condition:the Bidder Should Have Supplied Tendered Product S During Preceding 3financial Years I.e. Current Year And Three Previous Financial Years As Ondate Of Opening Of The Bid As Per The Following Criteria: I Single Order Of Atleast 35% Of Quantity Under Procurement; Or Ii Two Orders Of At Least 20?chof Quantity Under Procurement; Or Iii Three Orders Of At Least 15?ch Ofquantity Under Procurement.pre-qualifying Condition-1:guarantee / Warrantee:satisfactory Performance Certificate Issued By Respective Buyer Organizationalong With The Above Orders Should Be Uploaded With The Bid. The Materialsupplied Shall Be Guaranteed For A Period Of 12 Months From The Date Ofreceipt At Destination Towards Manufacturing Defect, Bad Workmanship Andsubstandard Material. Such Material Shall Be Replaced By You Free Of Cost.test Certificates: Quantityvariation : Class:the Successful Bidder Shall Be Required To Submit Test Certificates Of Theoffered Item Along With Supply, As Per Is Provisions Free Of Cost. Thementioned Quantity Is Subject To Change 20% And Order For Such Changedquantity Shall Be Placed. Supply Quantity Variation +/- 2% Is Acceptable.medium.technical Specification:galvanised Mild Steel Tube Conforming To Is 1239 Part-i Of 2004 With Latestamendments & Isi Mark, Continuously Welded, Electric Resistance Weldederw, High Frequency Induction Welded Hfiw/hot Finished Welded Hfw, Screwed On Both Ends To Is:554/86 For Pipe Threading, Suitable For Gas, Water & Steam Application, One End Socketed And Other End Protected Withplastic Thread Protector In Random Lengths Of 5 To 7 Mtrs., Socket To Confirmis 1239 Part- Ii Of 1992 In Following Sizes.* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. 5 ; 5 ; O %o % 4 4 /input Tax Credititc And Reverse Chargercm Details 5 ; 5 ; /itc On Gst 5 ; 5 ; /itc On Gst Cess100%na //o ; E O ; E /consignees/reporting Officer And Quantity12 / 27 . .5. ./s.no. //o ; E O ; E /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin Surendraghodeswar441401, Po:kandri, Tah:ramtek, Dist:nagpur, Maharashtra, 441401360steel Tubes, Tubulars And Other Wrought Steel Fittings V2 As Per Is 1239 Part 1 1metric Tonne 5 5 1 2 & & % % % % B B < < % % 4 C4 C B B /minimum 50% And 20% Localcontent Required For Qualifying As Class 1 And Class 2 Local Supplier Respectivelybis Requiredyes w w /technical Specifications* w / As Per Gem Category Speci Cation /speci Cation w w /specificationname B B U U /bid Requirementallowed Valuesgoverningspecificationsgoverning Specificationsgenerally Conforming To Is 1239 Part 1 - Latestmaterial, Design &dimensionsmanufacturing Process Oftubeelectric Resistance Welded Or High Frequncyinduction Welded Erw Or Hfiwend Condition Of Tubescrewed & Socketed Endclassification Of Steel Tubedepending On Wallthicknessmediumsurface Condition Of Thetubegalvanized Tubenominal Bore Of Tube Mm40additional Specification Parameters - Steel Tubes, Tubulars And Other Wrought Steel Fittings V2as Per Is 1239 Part 1 1 Metric Tonne Specification Parameternamebid Requirement Allowed Valueseligibility Criteria:the Bidder Should Upload Bis License Issued To Manufacturer For Offereditem Valid As On The Date Of Bid Opening. Copy Of The Valid Bis License Shouldbe Uploaded, Failing Which The Offer Submitted By Bidder Shall Be Liable To Beignored. Make/ Manufacturer Name And Brand Name Of The Offered Itemmust Be Clearly Specified By The Bidder.13 / 27 Pre-qualifying Condition:the Bidder Should Have Supplied Tendered Product S During Preceding 3financial Years I.e. Current Year And Three Previous Financial Years As Ondate Of Opening Of The Bid As Per The Following Criteria: I Single Order Of Atleast 35% Of Quantity Under Procurement; Or Ii Two Orders Of At Least 20?chof Quantity Under Procurement; Or Iii Three Orders Of At Least 15?ch Ofquantity Under Procurement.pre-qualifying Condition-1:guarantee / Warrantee:satisfactory Performance Certificate Issued By Respective Buyer Organizationalong With The Above Orders Should Be Uploaded With The Bid. The Materialsupplied Shall Be Guaranteed For A Period Of 12 Months From The Date Ofreceipt At Destination Towards Manufacturing Defect, Bad Workmanship Andsubstandard Material. Such Material Shall Be Replaced By You Free Of Cost.test Certificates: Quantityvariation : Class:the Successful Bidder Shall Be Required To Submit Test Certificates Of Theoffered Item Along With Supply, As Per Is Provisions Free Of Cost. Thementioned Quantity Is Subject To Change 20% And Order For Such Changedquantity Shall Be Placed. Supply Quantity Variation +/- 2% Is Acceptable.medium.technical Specification:galvanised Mild Steel Tube Conforming To Is 1239 Part-i Of 2004 With Latestamendments & Isi Mark, Continuously Welded, Electric Resistance Weldederw, High Frequency Induction Welded Hfiw/hot Finished Welded Hfw, Screwed On Both Ends To Is:554/86 For Pipe Threading, Suitable For Gas, Water & Steam Application, One End Socketed And Other End Protected Withplastic Thread Protector In Random Lengths Of 5 To 7 Mtrs., Socket To Confirmis 1239 Part- Ii Of 1992 In Following Sizes.specification Parameternamebid Requirement Allowed Values* Bidders Offering Must Also Comply With The Additional Specification Parameters Mentioned Above. 5 ; 5 ; O %o % 4 4 /input Tax Credititc And Reverse Chargercm Details 5 ; 5 ; /itc On Gst 5 ; 5 ; /itc On Gst Cess100%na //o ; E O ; E /consignees/reporting Officer And Quantity5. .5. ./s.no. //o ; E O ; E /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin Surendraghodeswar441401, Po:kandri, Tah:ramtek, Dist:nagpur, Maharashtra, 4414011605 5 : : H H/buyer Added Bid Specific Terms And Conditions1. Genericoption Clause: The Purchaser Reserves The Right To Increase Or Decrease The Quantity To Be Ordered Upto 25 Percent Of Bid Quantity At The Time Of Placement Of Contract. The Purchaser Also Reserves The Right Toincrease The Ordered Quantity Up To 25% Of The Contracted Quantity During The Currency Of The Contract Atthe Contracted Rates. The Delivery Period Of Quantity Shall Commence From The Last Date Of Originaldelivery Order And In Cases Where Option Clause Is Exercised During The Extended Delivery Period The14 / 27 Additional Time Shall Commence From The Last Date Of Extended Delivery Period. The Additional Deliverytime Shall Be Increased Quantity Original Quantity Original Delivery Period In Days, Subject Tominimum Of 30 Days. If The Original Delivery Period Is Less Than 30 Days, The Additional Time Equals Theoriginal Delivery Period. The Purchaser May Extend This Calculated Delivery Duration Up To The Originaldelivery Period While Exercising The Option Clause. Bidders Must Comply With These Terms.2. Genericbidder Financial Standing: The Bidder Should Not Be Under Liquidation, Court Receivership Or Similarproceedings, Should Not Be Bankrupt. Bidder To Upload Undertaking To This Effect With Bid.3. Genericbidders Are Advised To Check Applicable Gst On Their Own Before Quoting. Buyer Will Not Take Anyresponsibility In This Regards. Gst Reimbursement Will Be As Per Actuals Or As Per Applicable Rateswhichever Is Lower, Subject To The Maximum Of Quoted Gst %.4. Genericbuyer Organization Specific Integrity Pact Shall Have To Be Complied By All Bidders. Bidders Shall Have Toupload Scanned Copy Of Signed Integrity Pact As Per Buyer Organizations Policy Along With Bid. Click Hereto View The File5. Genericbidder Shall Submit The Following Documents Along With Their Bid For Vendor Code Creation: A. Copy Of Pan Card. B. Copy Of Gstin. C. Copy Of Cancelled Cheque. D. Copy Of Eft Mandate Duly Certified By Bank.6. Genericsupplier Shall Ensure That The Invoice Is Raised In The Name Of Consignee With Gstin Of Consignee Only.7. Genericwithout Prejudice To Buyer S Right To Price Adjustment By Way Of Discount Or Any Other Right Or Remedyavailable To Buyer, Buyer May Terminate The Contract Or Any Part Thereof By A Written Notice To The Seller, If:i The Seller Fails To Comply With Any Material Term Of The Contract.ii The Seller Informs Buyer Of Its Inability To Deliver The Materials Or Any Part Thereof Within Thestipulated Delivery Period Or Such Inability Otherwise Becomes Apparent.iii The Seller Fails To Deliver The Materials Or Any Part Thereof Within The Stipulated Delivery Periodand/or To Replace/rectify Any Rejected Or Defective Materials Promptly.iv The Seller Becomes Bankrupt Or Goes Into Liquidation.v The Seller Makes A General Assignment For The Benefit Of Creditors.vi A Receiver Is Appointed For Any Substantial Property Owned By The Seller.vii The Seller Has Misrepresented To Buyer, Acting On Which Misrepresentation Buyer Has Placed Thepurchase Order On The Seller.8. Genericwhile Generating Invoice In Gem Portal, The Seller Must Upload Scanned Copy Of Gst Invoice And Thescreenshot Of Gst Portal Confirming Payment Of Gst.9. Scope Of Supplyscope Of Supply Bid Price To Include All Cost Components : Only Supply Of Goods15 / 27 . Purchase Preference Centrepurchase Preference To Micro And Small Enterprises Mses: Purchase Preference Will Be Given To Mses Asdefined In Public Procurement Policy For Micro And Small Enterprises Mses Order, 2012 Dated23.03.2012 Issued By Ministry Of Micro, Small And Medium Enterprises And Its Subsequentorders/notifications Issued By Concerned Ministry. If The Bidder Wants To Avail The Purchase Preference, The Bidder Must Be The Manufacturer Of The Offered Product In Case Of Bid For Supply Of Goods. Traders Areexcluded From The Purview Of Public Procurement Policy For Micro And Small Enterprises. In Respect Of Bidfor Services, The Bidder Must Be The Service Provider Of The Offered Service. Relevant Documentaryevidence In This Regard Shall Be Uploaded Along With The Bid In Respect Of The Offered Product Or Service. Ifl-1 Is Not An Mse And Mse Seller S Has/have Quoted Price Within L-1+ 15% Of Margin Of Purchasepreference /price Band Defined In Relevant Policy, Such Seller Shall Be Given Opportunity To Match L-1price And Contract Will Be Awarded For Percentage Of 25% Of Total Value.11. Purchase Preference Centrepurchase Preference Linked With Local Content Pp-lc Policy:the Bid Clause Regarding Preference To Make In India Products Stands Modified In This Bid And Shall Begoverned By The Pplc Policy No. Fp-20013/2/2017-fp-png Dated 17.11.2020 Issued By Mop&ng Asamended Up To Date. Accordingly, Bidders With Local Content Less Than Or Equal To 20% Will Be Treated As Non Local Supplier . The Prescribed Lc Shall Be Applicable On The Date Of Bid Opening. Sanctions On Thebidders For False / Wrong Declaration Or Not Fulfilling The Local Content Requirement Shall Be As Per The Pplcpolicy. Further Following Additional Provisions Are Added In The Certification And Verification Of Local Contentprovision Of The Preference To Make In India Clause:i. In Case Of Foreign Bidder, Certificate From The Statutory Auditor Or Cost Auditor Of Their Own Office Orsubsidiary In India Giving The Percentage Of Local Content Is Also Acceptable. In Case Office Orsubsidiary In India Does Not Exist Or Indian Office/subsidiary Is Not Required To Appoint Statutoryauditor Or Cost Auditor, Certificate From Practicing Cost Accountant Or Practicing Charteredaccountant Giving The Percentage Of Local Content Is Also Acceptable.ii. Along With Each Invoice: The Local Content Certificate Issued By Statutory Auditor On Behalf Ofprocuring Company Shall Be Submitted Along With Each Invoice Raised. However, The % Of Localcontent May Vary With Each Invoice While Maintaining The Overall % Of Local Content For The Totalwork/purchase Of The Pro-rata Local Content Requirement. In Case, It Is Not Satisfied Cumulatively Inthe Invoices Raised Up To That Stage, The Supplier Shall Indicate How The Local Content Requirementwould Be Met In The Subsequent Stages.iii. The Bidder Shall Submit An Undertaking From The Authorized Signatory Of Bidder Having The Power Ofattorney Along With The Bid Stating The Bidder Meets The Mandatory Minimum Lc Requirement Andsuch Undertaking Shall Become A Part Of The Contract.12. Certificatesbidders Offer Is Liable To Be Rejected If They Dont Upload Any Of The Certificates / Documents Sought In Thebid Document, Atc And Corrigendum If Any.13. Buyer Added Bid Specific Atcbuyer Added Text Based Atc Clausesbidder To Confirm Clause Mentioned In Buyer Atc In Their Offer:1. This Purchase Is Also Governed By The General Terms And Conditions: Https://gem.gov.in/termscondition 2. Delivery Schedule: Maximum Delivery Period For Offered Item Should Be 60 Days From The Date Of Receipt Of Purchase Order. Delivery Period More Than 60 Days Is Not Acceptable. O Er With Delivery Period More Than 60 Days Shall Be Straightway Rejected. 3. Firm Price: Prices Quoted/bidded Shall Remain Firm Till Supply Is Completed Satisfactorily In All Respects. Price Variation Clause Will Not Be Accepted. 4. Manufacturer Authorization: Wherever Selling Agent/dealer/distributor Authorized By The Manufacturerare Submitting The Bid, Tender Speci C Authorization & Undertaking Certi Cate By Manufacturer On Letter Head Of Pr16 / 27 Incipal/manufacturer, Mentioning The Details Such As Name, Designation, Address, E-mail Id And Phone No., As Per Annexure-i Must Be Submitted. Note: I The Authorization Should Be Pre- Dated From Tender Opening Date, Properly Signed And Valid.the Validity Should Corresponds To The Delivery Period Stipulated In Tender Enquiry. Ii Selling Agent/dealer/distributor Authorized By The Manufacturer Shall Submit Manufacturer Authorization As Per Annexure-i, Failing Which The Offer Shall Be Outrightly Rejected. 5. The Sellers/bidders Who Are Not In The Category Of Emd Exemption: Step-i: The Intending Bidders Should Submit Earnest Money Of Rs.25, 000.00 For Schedule-1, Rs.25, 000.00 For Schedule-2 & Rs.25, 000.00 For Schedule-3. I.e. Rs.75, 000.00 For All 3 Schedules Mentioned In Bid Documents To Moil Ltd., Along With Their O Er Otherwise Their O Er Will Summarily Be Rejected. Emd Should Be Deposited Electronically Rtgs/neft From Nationalised/ Scheduled Bank Only In The Designated Account As Under: A: Name Of Bank & Branch: Idbi Bank, Civil Lines Branch, Nagpurb: Account No. 0041102000038465c: Ifs Code: Ibkl0000041 Bidder To Indicate Bid Number And Name Of Bidding Entity In The Transaction Details Eld At The Time Of Online Transfer. Bidder Has To Upload Scanned Copy/proof Of The Online Payment Transfer Along With Bid. Bidders Are Requested To Upload The Emd Details In Format Mentioned Below. Emd Should Be Deposited In One Go And Exact Amount Should Be Re Ected In Our Bank Statement On Or Before The Opening Date & Time Of Tender, Failing Which The O Er Shall Be Rejected Outrightly. Step-ii: After Remittance Of Earnest Money As Above, Utr No./reference No. In Case Of Idbi Bank Should Besubmitted By Participating Bidder In Their O Er On Gem Portal. The Receipt Of Emd Shall Be Veri Ed By Moil Ltd., Against Details Of The Utr No. /reference No. In Case Of Idbi Bank And O Ers Of Those Participating Bidders Whose Receipt Of Emd Is Confirmed By Finance Department, Moil Ltd., Shall Be Considered For Further Evaluation. In Short, Mentioning The Correct Utr No. /reference No. In Case Of Idbi Bank In Their O Er On Gem Portal Is Mandatory, Failing Which The Offer Shall Be Rejected Outrightly. Earnest Money By Way Of Demand Draft, Cheque, Bank Guarantee, Deposit Receipt Or Any Other Form Will Not Be Entertained. I.e. No Other Mode Of Payment Of Emd Shall Be Accepted. Emd Shall Be Forfeited If Any Bidder Withdraws Their Offer Before Finalization Of This Tender.note: Emd Of The Successful Bidder Shall Be Returned Within 30 Days Of Submission Of Performance Bank Guarantee/security Deposit As Per Contractual Terms Or Thirty Days Of Successful Completion Of Contract, Whichever Occurs Earlier.format Of Emd Deposited. Bid Number : Name Of Bidder : Bidder Pan No. : Bidder Gstin No. Bidder Bank Account No. Bidder Bank Ifsc Code : Authorised Person Name: Mobile No.& E-mail Id Of Authorised Person : 17 / 27 Scheduleno.description Of Item/categorycorrectutr No. /referenceno.& Dateamountrs.1lot No-1 G.i. Pipe, Size: Od:115.0-113.1mm, Wall Thickness: 4.5 Mm, Nb: 100mm 25, 000/-2lot No-2 G.i. Pipe, Size: Od: 166.5-163.9mm, Wall Thickness:4.8mm, Nb: 150mm 25, 000/-3lot No-3 G.i. Pipe, Size: Od:34.2 33.3mm, Wall Thickness: 3.20mm, Nb: 25mm 25, 000/-lot No-4 G.i. Pipe, Size :od: 60.8 59.7mm, Wall Thickness: 3.60mm, Nb: 50mmlot No-5 G.i. Pipe, Size: Od: 21.8 21.0mm, Wall Thickness: 2.6mm, Nb: 15mmlot No-6 G.i. Pipe, Size :od:48.8 47.9mm, Wall Thickness: 3.2mm, Nb:40mm Enclosed: Payment Receipt Towards Above Utr No. /reference No. Signed:designation:corporate Seal: 6. For Emd Exemption Bidders: The Bidder Seeking Emd Exemption, Must Submit The Valid Supporting Document For The Relevant Category As Per Gem Gtc With The Bid May Refer Point No.4xiii, N Of Gtc General Terms & Conditions With Amendments, If Any. Under Mse Category, Only Manufacturers For Goods And Service Providers For Services Are Eligible For Exemption From Emd. Traders Are Excluded From The Purview Of This Policy. In Absence Of Valid Emd Exemption Document, The Bid Will Be Out- Rightly/summarily Rejected And No Correspondence In This Regard Shall Be Entertained. Step I: The Participating Bidders Under This Category Should Mandatorily Mention The Exemption Document Type In Their Offer On Gem Portal.step-ii: Upload The Relevant Document In The Upload Link On Gem Portal. The Status Of Mse Shall Be Decided Based On The Uploaded Document And If Found In Line Then Only, Their Offer Shall Be Considered For Further Evaluation. In Short, Mentioning The Exemption Document Type In Their O Er On Gem Portal & Uploading The Same On Gem Portal Is Mandatory, Failing Which The O Er Shall Be Rejected Outrightly. C: Psus: State/central Govt. Organization/psus Are Exempted From Submission Of Emd/sd. However, They Should Mandatorily Mention The Document Type In Their O Er On Gem Portal For Getting Exemption Andupload The Relevant Document With Their O Er On Gem Portal, Failing Which The O Er Shall Be Rejected Outrightly. 18 / 27 . Supplier Shall Ensure That The Invoice Is Raised In The Name Of Consignee With Gstin Of Consignee Only. Please Provide Details Of Contact Person Name, Designation, Mobile & E-mail Id For Correspondence. 7.1 For Madhya Pradesh State Mines/plant: The Material Shall Be Despatched & Invoiced From Supplier S Invoicing Location & Invoice Should Be Generated On Consignee As Per Bid Document. I.e. In The Tax Invoice To Be Issued By The Supplier, Ship To Party & Billed To Party Will Be: Consignee As Per Bid Document With Gstn: 23aaacm8952a1zt For Madhya Pradesh State Supply. 7.2 For Maharashtra State Mines/plant: The Material Shall Be Despatched & Invoiced From Supplier S Invoicing Location & Invoice Should Be Generated On Consignee As Per Bid Document. I.e. In The Tax Invoice To Be Issued By The Supplier, Ship To Party & Billed To Party Will Be: Consignee As Per Bid Document With Gstn: 27aaacm8952a1zl For Maharashtra State Supply.8. Despatch/transportation Through Registered Common Carrier: In The Event You Are Successful Tenderer And You Intend To Dispatch/transport The Ordered Material By Road, It Will Be Through Registered Common Carrier As Per Guidelines Mentioned In The Carriage By Road Act 2007 And Subsequent Amendments If Any. In Case Of Non-compliance, Action Shall Be Imposed As Deemed Fit, As Per The Above Mentioned Carriage By Road Act 2007 . 9. Performance Bank Guarantee: It Is Mandatory On Part Of Supplier To Submit The Performance Bank Guarantee @ 5% Of Total Value Of Order For Period Of 14 Months As Mentioned In Bid Document. - Bank Details: Moil Limited, Nagpur- Name Of The Bank & Branch: Idbi Bank, Gupta House, Ravindranath Tagore Road, Civil Lines Nagpur-440001- Ifs Code: Ibkl0000389- Current Account No. 041102000018027.- The Pbg Will Be Submitted Through Structured Financial Management Systemsfms Platform- Performance Bank Guarantee To Be Uploaded On Gem Portal Within 15 Days Of Award Of Contract On Gem, As Per General Terms And Conditions Gtc On Gem, Refer Clause No. 7, Ii. Hard Copy To Be Submitted To Jgm Fin., Moil Ltd., Moil Bhawan 1a Katol Road, Nagpur-440013. Performance Bank Guarantee Is To Be Furnished By A Speci Ed Date Generally Fteen Days After Noti Cation Of Award And It Should Remain Valid For A Period Of Sixty Days Beyond The Date Of Completion Of All Contractual Obligations Ofthe Supplier, Including Warranty Obligations. The Performance Security Will Be Forfeited In The Event Of A Breach Of Contract By The Bidder/contractor. It Shall Be Refunded To The Bidder/contractor Without Interest, After He Duly Performs And Completes The Contract In All Respects But Not Later Than Sixty Days Of Completion Of All Such Obligations Including The Warranty Under The Contract. 10. Declaration Under Companies Act:the Firm/individual While Submitting The Tender Should Submit The Under Mentioned Declaration Duly Signed. We Declare That None Of Our Proprietor / Partner / Director Of The Rm/ Company Has Any Relationship Within The Meaning Of Section 6 Of The Companies Act 2013 With Any Of The Employee Working In Moil Ltd. Or Director Of Moil . If The Proprietor / Partner / Director Of The Rm/ Company Has Any Relationship Within The Meaning Of Section 6 Of Thecompanies Act 2013 With Any Of The Employee Working In Moil Ltd Or Director Of Moil Shall Declare The Same In His Bid. 11. Arbitration Clause: Disputes & Arbitration For Psus Only- All The Disputes And Di Erences Arising Out Of Or In Any Way Touching Or Concerning This Agreement Between The Parties Shall Be Resolved By A Reference To The Permanent Machinery Of Arbitrators Pma I.e. To The Sole Arbitrator In The Department Of Public Enterprises As Per The O.m. No. 41/2013-dpegm/fts-1835 Dated 22/05/2018 Issued By The Department Of Public Enterprises, Ministry Ofheavy Enterprises Govt. Of India And For All Purposes Of The Arbitration The Rules And Procedure Prescribed Therein Shall Be Applicable . 12. Jurisdiction: All Questions, Disputes Or Di Erences, Arising Under, Outside Or In Connection With The Tender/or19 / 27 Der Contract Shall Be Subject To The Exclusive Jurisdiction Of The Courts At Nagpur Only. 13. Dispute: In The Event Of Dispute Arising Out Of This Contract, The Decision Of Chairman-cum Managing Director Moil Ltd. Shall Be Final & Binding. 14. No Deviation Certificate: We Certify That, There Is No Deviation In The O Er Submitted By Us, From The Bid/tender Terms & Conditions On Gem Portal. In Case If There Is Any Di Erence In Any Terms & Conditions, The Same May Be Ignored And Considered To Have Been Accepted By Us Into To As Per Bid Document On Gem . Bidder To Upload The No Deviation Certificate . 15. Revised Public Procurement Preference To Make In India: It Is Certified That The Tender Is Compliant To Ppp Mii Order & Shall Be Nalised Keeping In View Of All Its Updates. The Instant Tender Shall Be Inter-alia Subject To Revised Public Procurement Preference To Make In India, Order 2017 Revision, As Amended From Time To Time Bearing No. P-45021/2/2017 Pp Be-ii Issued By The Government Of India, Ministry Of Commerce And Industry, Department For Promotion Of Industry And Internal Trade Public Procurement Section Dated 16/09/2020. The Tenderers Who Wish To Take The Preference Under The Said Order Dated 16/09/2020 Shall Mandatorily Be Required To Submit The Requisite Documents As Prescribed Under The Public Procurement Preference To Make In India, Order 2017- Revision. Only After Satisfactory Submission Of The Requisite Documents Bene Ts Under The Aforesaid Order Shall Be Provided. Revised Order Or Any Updates May Be Accessed At Dpiits Website: Https.dipp.gov.in/public-procurements Only To Facilitate, We May Request To Refer Clause No.9a & B Of Above Order Towards Verification Of Local Content Reproduced Hereunder And Upload As Applicable: A. The Class-i Local Supplier / Class-ii Local Supplier At That Time Of Tender, Bidding Or Solicitation Shall Be Requiredto Indicate Percentage Of Local Content And Provide Self-certi Cation That, The Item O Ered Meets The Local Content Requirement For Class-i Local Supplier / Class-ii Local Supplier, As The Case May Be. They Shall Also Give Details Of The Locations At Which The Local Value Addition Is Made. B. In Cases Of Procurement For A Value In Excess Of Rs.10 Crores, The Class-i Local Supplier / Class-ii Local Supplier Shall Be Required To Provide A Certificate From I Statutory Auditor Or Cost Auditor Of The Company In The Case Of Companies Orii A Practicing Cost Accountant Or Practicing Chartered Accountant In Respect Of Suppliers Other Than Companies Giving The Percentage Of Local Content. In Event Of Non-submission Of The Above Documents, Your Offer Shall Be Liable To Be Ignored. Kindly Upload The Certi Cate Giving The Percentage %of Local Content And Give Details Of The Locations/addresss At Which The Local Value Addition Is Made. As Per Revised Public Procurement Preference To Make In India, Order 2017, On 16/09/2020 Enclosed, Clause No.3, Bidder To Mention In Which Category Their Firm Belong I.e. Class-i Local Supplier/ Class-ii Local Supplier/ Non-local Supplier. Kindly Upload The Certificate By Mentioning The Class. In View Of Above, You Are Requested To Kindly Provide The Self-certi Cation As We Certify That Items O Ered/quoted In Tender Has Got % Of Local Content And The Details Of The Locations At Which The Local Value Addition Is Made Is . Bidder To Submit The % Of Local Content & Location Of Local Content With Their Offer. 16. Restrictions On Public Procurement From Certain Countries: In This Regard Bidder May Please Refer O Ce Memorandum No. 6/18/2019-ppd Dt.23-07-2020 & Subsequent Orders Issued By Public Procurement Division, Department Of Expenditure, Ministry Of Finance, Government Of India Towards Restrictions On Public Procurement From Certain Countries. Referring To The Above, The Local Suppliers Should Submit The Certificate As Under: We Have Read The Clauses Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India And We Hereby Certify That Our Firm Is Not From Such A Country And Is Eligible To Be Considered . 17. Bidder To Con Rm Location From Where The Materials Shall Be Invoiced Upto Destination Basis As Per Consignee Mentioned In Bid Document Complete Address, Name Of The Bidder Company/firm Along With Telephone No. & Fax No., Name Of Person, Mobile No., E-mail Id Of The Bidder To Be Given. 18. Past Supplies: Bidders Is Requested To Submit/upload The Supply Order Copies For Tendered Items As Docu20 / 27 Mentary Evidence Towards Past Supplies From Govt. Deptt./govt. Undertaking, Enterprises/customer. 19. Taxes: Payment Of Tax Is Primarily The Responsibility Of The Seller And Will Not Be Paid Unless It Is Clearly Shown On The Quotation As Payable Extra. Any Change In Taxation During The Tenure Of Contract, Will Be As Per Applicable Statute. Under Gst Regime Registration Under Gst Is Made Mandatory. You Shall Mention Your Gst Provisional Id S Incase Your Supply Is From More Than One Location Mention All Relevant Gst S In The Quotation. Offers Received From Company/ Rm/individual Without Gst Provisional Id S Are Liable To Be Rejected Provided They Fall Within The Preview Of Gst. Timely Compliance Of Gst Provisions And Ling Of Gst Returns Is The Responsibility Of The Bidder. Any Non-compliance May Result In Withholding Of Bills Partly Or Fully Until It Is Reflected In Form Gstr-2a. 19.1 Tds Under Gst Shall Be Deducted As Per The Applicable Gst Provisions. 20. Bidder/supplier To Ensure That The Validity Of The Statutory Certi Cate /competency Certi Cate Shall Be Valid During Tender Finalization And Execution Stage. 20.1 Test Certificate: The Successful Bidder Shall Be Required To Submit Test Certi Cates Of The O Ered Item Along With Supply, As Per Is Provisions Free Of Cost. 21. Bidder To Submit Itr/profit & Loss Statement/balance Sheet To Substantiate Applicability Of Gst. 22. Treds Platform: It May Be Noted That Government Of India Has Implemented Trade Receivable Discounting System Treds To Address Challenges Faced By Msmes In Delayed Payments After Receipt/acceptance Of Material/services From Government Buyers Leading To Shortfall Of Working Capital. Treds Is An Online Electronic Institutional Mechanism For Facilitating The Nancing Of Trade Receivables Of Msmes Through Multiple Nanciers. Moil Ltd., Is Already Registered On The Following Treds Platform: M/s. A. Treds Invoicemart, Mumbai Msme Bidders Are Required To Register On The Treds Platform. The Msme Vendors Can Avail The Treds Facility, If They Want To . All Mse Vendors/suppliers Are Advised To Get Themselves Registered On Treds Platform Www.treds.in Accordingly. 23. Bidders Who Have Not Performed Satisfactorily In The Earlier Tenders/work Orders Or Have Violated The Terms Of Nit, Moil Ltd. Reserves The Right To Dis-qualify That Bidder. 24. Integrity Pact:a The Bidder Is Required To Submit The Integrity Pact Agreement Duly Lled, Scanned & Signed By Authorized Signatory Of Tender As Per Enclosed Annexure Along With The Tender Document & Upload. B A Person Signing Ip Shall Not Approach The Courts While Representing The Matters To Iems And He/ She Will Await Their Decision In The Matter. The Details Of Independent External Monitor Iem Nominated For This Tender Are Given Here As Under: Name Of Independent External Monitor Iem: I Shri. Cmde Rakesh Anand, E-mail:- Ansem [email protected] Ii Shri. Nand Kumar Mishra, E-mail:- [email protected] [email protected] 25. Details Of The Location Of Mines & Plants Situated: 21 / 27 Name Of Mines & Postal Addressoff Day/authorityto Be Contactedkandri Minepo-kandri, Tah Ramtek, Distt.- Nagpur Ms, Pin: 441401.tel.: 07114-268179 Off.268149 Res., 268150noskandrithursday Mine Manager Note: Bidder To Confirm / Accept Above Clauses Along With Their Offer On Gem:sign. & Date Of Authorised Signatory: Name Of Authorised Signatory: Designation Of Authorised Signatory: Seal Of Firm: 26. For Technical Clarifications If Any, You May Contact: Mr. Atul Sharma, Jt.gmmech., Moil Bhawan, 1a, Katol Road, Nagpur-440 013. Mobile No. 7709045650 Email: [email protected] For Commercial Clarifications If Any, You May Contact: Mr. D. I. Khan, Agmmaterials, Moil Bhawan, 1a, Katol Road, Nagpur-440 013. Contact No. 0712-2806140 Mobile No. 7387411115 Email: [email protected] 27. Annexure-a Format For Undertaking To Be Submitted/uploaded By Bidder Along With The Tender Documents I Name And Designation Appointed As The Attorney/ Authorized Signatory Of The Bidder Including Its Constituents M/s. Hereinafter Called The Bidder The Purpose Of The Tender Documents For .as Per The Tender No Of Moil, Do Hereby Solemnly A Rm And State On The Behalf Of The Bidder Including Its Constituents As Under: 22 / 27 . I/we The Bidders Am/are Signing This Document After Carefully Reading The Contents Of The Above Mentioned Tender. 2. I/we Declare And Certify That I/we Have Not Made Any Misleading Or False Representation Anywhere In The Tendersubmitted Including The Annexure Thereto. 3. I/we Also Understand That My/ Our O Er Will Be Evaluated Based On The Documents/credentials Submitted Along With The Offer And Same Shall Be Binding Upon Me/us. 4. I/we Declare That The Information And Documents Submitted Along With The Tender Documents By Me/ Us Are Complete And Correct And I/we Are Fully Responsible For The Authenticity And Correctness Or The Information And Documents, Submitted By Us. 5. I/we Understand That At Any Time During Process For Evaluation Of Tenders, If Any Information / Document Submitted By Me / Us Are Found To Be Suppressing Facts / Forged / False / Fabricated / Fudged Or Incorrect, It Shall Lead To Forfeiture Of The Emd, If Submitted And Initiating Any Legal Action As Deemed T The Moil. Further, I/we...........................name Of The Bidder And All My/ Our Constituents Understand That My/ Our Offer Shall Be Summarily Rejected. 6. I/we Also Understand That At Any Time After Award Of Contract, If The Certi Cates Submitted By Me / Us Are Found To Be Suppressing Facts / False/ Forged/ Fabricated / Fudged Or Incorrect, It May Lead To Termination Of The Contract, Along With Forfeiture Of Emd / Sd And Performance Guarantee If Submitted, Besides Any Other Action Provided In The Contract And Initiating Any Legal Action As Deemed Fit By Moil. 7. We Declare That None Of Our Proprietor / Partner / Director Of The Rm/ Company Has Any Relationship Within Themeaning Of Section 6 Of The Companies Act 2013 With Any Of The Employee Working In Moil Ltd Or Director Of Moil . 8. We Have Read The Clause Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India And We Hereby Certify That Our Firm Is Not From Such Country And Is Eligible To Be Considered . 9. We Certify That, There Is No Deviation In The O Er Submitted By Us, From The Bid/tender Terms & Conditions On Gem Portal. In Case If There Is Any Di Erence In Any Terms & Conditions, The Same May Be Ignored And Considered To Have Been Accepted By Us In To To As Per Bid Document On Gem . 10. Despatch/transportation Through Registered Common Carrier:in The Event You Are Successful Tenderer And You Intend To Dispatch/transport The Ordered Material By Road, It Will Be Through Registered Common Carrier As Per Guidelines Mentioned In The Carriage By Road Act 2007 And Subsequent Amendments If Any. In Case Of Non-compliance, Action Shall Be Imposed As Deemed T, As Per The Above Mentioned Carriage By Road Act 2007 . Seal And Signature Of The Bidder Place: Date:23 / 27 28. Annexure - Bformat Of Non-collusive Tendering Certificateto Be Signed By An Authorised Person On The Tenderer S Behalf To, Moil Limited, Nagpur. Dear Sir/ Madam, Non-collusive Tendering Certificate For Rfq/ Tender No. Date 1. We, Names Of The Tenderers Of Address Es Of The Tenderers Refer To The Bid/ O Er Against The Tender . 2. Non-collusionwe Represent And Warrant That In Relation To The Tender: A Our Bid Was Developed Genuinely, Independently And Made With The Intention To Accept The Contract It Awarded; B Our Bid Was Not Prepared With Any Agreement, Arrangement, Communication, Understanding, Promise Of Undertaking With Any Person Including Any Other Tenderer Or Competitor Regarding:i Prices;ii Methods, Factors Or Formulas Used To Calculate Prices;iii An Intention Or Decision To Submit A Bid;iv An Intention Or Decision To Withdraw A Bid;v The Submission Of Bid That Does Not Conform With The Requirements Of The Tender;vi The Quality, Quantity, Speci Cations Or Delivery Particulars Of The Products Or Services To Which This Tender Relates; Andvii The Terms Of The Bid, And We Undertake That We Will Not, Prior To The Award Of The Contract, Enter Into Or Engage In Any Of The Foregoing. 3. Disclosure Of In Case Of Job/ Project Contractswe Understand That We Are Required To Disclose All Intended Sub-contracting Arrangements Relating To The Tender Tothe Plants/ Mines--------, Moil Limited, Place -------------, Including Those Which Are Entered Into After The Contract Is Awarded. We Warrant That We Have Duly Disclosed And Will Continue To Disclose Such Arrangements To The Plants/ Mines --------, Moil Limited, Place ------. 4. Consequences Of Breach Or Non-compliancewe Understand That In The Event Of Any Breach Or Non-compliance With Any Warranties Or Undertakings In This Certi Cate, The Plants/ Mines, Moil Limited, Place May, At Its Discretion, Invalidate Our Bid, Exclude Us In Future Tenders, Pursue Damages Or Other Forms Of Redress From Us Including But Not Limited To Damages For Delay, Costs And Expenses Of Re-tendering And Other Costs Incurred, And /or In The Event That We Are Awarded The Contract Terminate The Contract. Signed For And On Behalf Of The Tenderersignature: 24 / 27 Name:position:date: 29. Annexure - I Authorization & Undertaking Certificate By Manufactureron Letter Head Of The Principal / Manufacturerto, Moil Limited, Moil Bhavan, 1-a, Katol Road, Nagpur 440013. Sub: Gem Bid No.: . Dear Sir, Whereas We, M/s Name Of Manufacturer Who Are Established And Reputable Manufacturers Of Tendered/offered Items Having Factories At Addresses Of Factoryies, Do Hereby Authorize M/ Name & Address Our Agent To Submit A Bid And Execute The Resultant Contract With You On Our Behalf Against The Above Tender. We, M/s Name Of Manufacturer Also Undertake The Following: I That, As A Matter Of Our Corporate Policy, We Do Not Directly Quote/ Market Our Products Directly To Any Organization In India Except In Situations Like Supplies To Oem /oes/ Opm, Supplies Of Spares And Consumables Bundled With Supply Of Equipment, Supplies To Customers Not Covered By Dealer Network Due To Geographical/ Logistics Constraints. Ii That We Will Accept The Responsibility For The Satisfactory Execution Of Orders Placed On Our Authorized Agent Including Warranty/ Guarantee Obligations. Iii That, Wherever Necessary, We Will Provide Requisite Inspection And Testing Facilities At Our Works In Respect Of Orders Placed On Our Authorized Agent. Iv Our Authorized Agents Price Will Not Exceed That Which We Would Have Quoted. V We Hereby Accept To Extend Our Full Support And Commitment For All The Terms And Conditions Including Guarantee And Warranty As Per The Conditions Of Contract, Technical Speci Cations For The Goods And Services O Ered For Supply By The Above Bidder On Our Behalf Against This Tender For The Entire
Gem Bids For Hiring Of Agency For Iso Certification Service - Iso 9001 -quality Management System Qms; Initial Audit, Consulting, Re-certification Audit; Training / Awarenessprogram On Iso, Internal Auditor Training For Managementrepresentatives, Guidance Fo..
Gem bids for Hiring Of Agency For Iso Certification Service - Iso 22000 Food Safety Management; Re-Certification Audit, Surveillance Audit, Registration Recertification Audit 1 Audit2 Surveillance Audit 1 And Audit 2; Registrationrecertification Audit 1 Audi.. /
Gem bids for Hiring Of Agency For Iso Certification Service - As Per Sow;As Per Sow; Training / Awareness Program On Iso /
Gem Bids For Hiring Of Agency For Iso Certification Service - Iso 9001 -quality Management System Qms, Iso 14001 -environmental Management System Ems, Iso 45001 -occupational Health & Safety Management System Ohas;re-certification Audit, Surveillance Au..
Gem Bids For Hiring Of Agency For Iso Certification Service - Iso 9001 -quality Management System Qms; Surveillance Audit, Re-certification Audit; Guidance For Documentation Andimplementation Of Relevant Management System, Workshopon Awareness Of Iso Certifi..
Gem Bids For Custom Bid For Services - Hiring Off Services Forcarbon Footprint Calculation And Iso 14064training Certification
